Electrical

19mm Inrush Push Button Switch Off/On - Blue/Red LED - Switch Body OnlyThe 9057 Series 19mm Marine Grade Switch is a compact precision control solution engineered for tight panel layouts and rugged environments. Housed in corrosion-resistant SS316 stainless steel and sealed to an IP69K waterproof rating made possible by Bluewater’s proprietary Deutsch-style connectors, it is built to withstand the demands of marine and outdoor applications.This IP69K waterproof switch is ideal for locations exposed to salt spray, washdowns, and constant environmental stress.This switch provides clear and intuitive feedback with smart LED indicators. It glows soft blue for backlighting and bright red when active, giving you immediate visual confirmation of power status. Rated for 15 amps in single channel or 7.5 amps per channel in dual channel configurations, the 9057 handles high current loads with consistent performance and reliability.Each switch features a fully detachable actuator that is completely customizable to fit your specific needs and style preferences. The built-in backlighting ensures visibility in any lighting condition.Ideal for boat builders, marine technicians, and anyone upgrading electrical systems where space is limited and durability is critical.Specifications: Switch Rating: 15A/12-24VDC Switch Contacts: 1 NO, 1 NC | 2 NO, 2 NC Mechanical Life: 50,000 Cycles Electrical Life: 10,000 Cycles Dimensions: View Dimensional Drawings Material: Nickel Plated Brass/ Stainless Steel LED Color: Blue/Green/Red Installation:Drill a 19mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color coded for your safety and convenience). Lastly connect the 2 contacts for the LED. Specifications: Action: ON-OFF Color: Blue/Red Box Dimensions: 1"H x 1"W x 2"L WT: 0.1 lbs UPC: 810196330757 Quick Guide (pdf)Brochure (pdf)

Read more less

MRBF Terminal Fuse - 200 Amp Transparent easy visual of fuse status Ignition-protected SAE/J1171-ISO8846 High interrupt rating satisfies ABYC requirements for DC main circuit protection on larger battery banks Color-coded for easy ID of amperage rating Features Protects Electrical Circuits from short circuit events and over-current loads, preventing wire insulation overheating and subsequent destruction. High Interrupt Current safely protects circuits connected to large paralleled battery banks with significant available power Ignition Protected safe for installation in closed compartments with potentially explosive gases Harsh Environment design with shock and vibration resistance ideal for marine and vehicle electrical systems. Sealed Against Dust & Water Intrusion to ensure reliable circuit protection for the life of the electrical system installation 58 Vdc Rating: easily supports 12 to 48V nominal applications. High Interrupt Current: safely protects circuits connected to large paralleled battery banks with significant available power 4-Year Warranty: We stand behind our product's ability to meet your needs. Specifications: Continuous Current (Amps): 200 Max Voltage (VDC): 58 Interrupt Rating @ 14 VDC (Amps): 10,000 Interrupt Rating @ 48Vdc (Amps): 5,000 Interrupt Rating @ 58Vdc (Amps): 2,000 Ingress Protection: IP66 Specifications: Amperage: 200a Fuse Type: Terminal Type: Fuses Box Dimensions: 2"H x 2"W x 5"L WT: 0.09 lbs UPC: 850053879654

Read more less

19mm Push Button Switch - Off/On Contact - Blue/Red LED - 1' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has a standard "Off/On" contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:1 ft. leadSpecifications: Function: Off-On (standard contact) Off/On: Blue/red Rear Mark Page: Red dot Switch Rating: 15A/12 – 24VDC   Material: Stainless steel Mechanical Life: 50,000 cycles     Electrical Life: 10,000 cycles Installation:Drill a 19mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications: Action: ON-OFF Color: Blue/Red Box Dimensions: 0"H x 0"W x 0"L WT: 0.21 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

19mm Push Button Switch - Off/On Contact - Blue/Red LED - 4' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has a standard "Off/On" contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:4 ft. leadSpecifications: Function: Off-On (standard contact) Off/On: Blue/red Rear Mark Page: Red dot Switch Rating: 15A/12 – 24VDC   Material: Stainless steel Mechanical Life: 50,000 cycles     Electrical Life: 10,000 cycles Installation:Drill a 19mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications: Action: ON-OFF Color: Blue/Red Box Dimensions: 0"H x 0"W x 0"L WT: 0.41 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

Pro Series Dolphin Battery Charger - 24V, 60A, 110/220VAC - 50/60HzThe Dolphin Series of battery chargers has always been recognized for its outstanding quality, which the manufacturer is proud to support with a 2-year warranty. Due to production on a wide scale, Dolphin is able to offer high-quality, truly international battery chargers at a reasonable price.The Pro Range, which allows battery banks of up to 1000 amps to be charged, can be equipped with an optional touch view touchscreen. It provides an intuitive display of measurements as well as charging phases (boost, absorption, and float), the allocated available power, and possible operating faults. The Pro range is equipped with communication via CAN bus, which means it can be used professionally in all land and industrial energy management sectors.Features: 24V-60A Dolphin Pro All Dolphin Battery Chargers and accessories are CE-marked and manufactured to UL and ABYC specifications The Pro Touch Range features a built-in TouchView remote in place of the standard display panel on the Pro chargers The Touchview control panel gives the user more information and control of the charger functions LED Display for programming and monitoring functions Temperature sensor for battery compensation Switch mode technology and a three-stage charging design with a power supply Modern, lightweight, and compact design with white aluminum powder-coated casing 4 screw simple install with easy access removable panel ISO 9002-certified manufacturing plant Three-Stage Charging CurveBulk Stage: A high current is sent to the battery until it reaches approximately 80% of its full charge.Absorption Stage: The voltage level is maintained and the current is reduced until the battery is 100% charged. Float Stage: Voltage and current are reduced to maintain the battery. Float gives what the battery requires. Specifications: Charger Input - Voltage: 110/220v Charger Output - Amps: 60a Charger Output Voltage: 24v Portable: No Box Dimensions: 8"H x 16"W x 19"L WT: 16.7 lbs UPC: 786142995038 Owner's Manual (pdf)

Read more less

Pro Installer 400A EZ-Mount Dual Bank Control Battery Switch - MC10Another addition to our multi award winning Pro Installer EZ Mount range, the innovative Dual Bank Control switch is like 3 switches in one, House, Start, and Emergency Parallel. Offering easy intuitive control for the boater, the Dual Bank Control switch features a unique isolated-On position which allows use of house loads and VHF radio if the engine needs to be electrically isolated, or allows the engine to be isolated during servicing while still providing power to house loads (for lighting, stereo, fridge etc). For boats or vehicles with single Engine and House battery bank, Dual Bank Control allows the use of optimized battery banks for their respective loads; an appropriately sized deep cycle bank for House loads, and thin plate starting batteries for the Engine. Further, sensitive electronics are isolated from starter motor induced voltage spikes because House and Engine loads are separated during normal operation, unlike Selector battery switches. As easy as 1, 2, 3, these revolutionary EZ Mount battery switches allow you to wire from the front for the easiest surface mounting. With their shared interconnection height, EZ-Mount battery switches "cluster" directly with the Pro Installer Busbar Range, resulting in the fastest, most compact installations. Optimized cable access makes installation a breeze. Tested to UL1107 ignition protection, CE Tinned copper 10mm (3/8 inch) studs Stainless steel washers and nuts Fiber reinforced plastics 400A Continuous / 600A 5 minutes Intermittent / 1500A 10 seconds Cranking (cable size to achieve ratings 120mm}, 4/0, smaller cable size will reduce the Amp rating) Waterproof to IP67 Same interconnection height as Pro Installer Removable knob allows isolation during servicing 3 removable side plates for protection Industry standard 3.85 x 3.85 inch footprint For surface mounting only Each Pro Installer battery switch is fully tested for pressure sealing, rotation force and electrically load tested SpecificationsMounting: Surface OnlyVoltage: 48v DC (for 12-48v systems, both banks must be same voltage)Rating: 400 Cont / 600 Inter / 1500 CrankDims: 3.85" x 3.85" x 3.62"Operation: 1, 1/2, Parallel, OffStud: 4x 10 mm (3.8")WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: AFD: No Lockable: No Positions: 1-1/2-Parallel-Off Continuous Amperage: 400a Box Dimensions: 3"H x 7"W x 8"L WT: 1.4 lbs UPC: 843687008583 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

3119 SMS Surface Mount System Panel Enclosure - 120/240V AC / 50A ELCI Main - 1 Blank Circuit PositionThe 3119 panel enclosure is for ELCI Main circuit breakers and other large frame devices. Meets ABYC E-11 when used with an ELCI Main circuit breaker and mounted within 10 feet of the shore power inletFeatures: Includes one 120/240V AC / 50A ELCI Main and one blank position Blank apertures for custom breaker loading Glass-filled polycarbonate mounting box Clear cover allows easy view of circuit breaker status Overlapping cover for strength and increased gasket protection Oversized, formed in place seamless PUR gasket Easily removable stainless steel hinge pin for unobstructed installation Stainless steel latch secures cover without penetrating the enclosure Blank circuit positions accommodate Carling Technologies™ A- and C- Series Flat Rocker and ELCI Main circuit breakers Stainless steel mounting hardware included Includes waterproof glands LED lights for back lighting and ON indication Technical Specifications: Minimum Operating Temperature: -35° C Maximum Operating Temperature: 66° C Cover Screws and Hardware: 10-32 Stainless Steel Enclosure Size: 6.0" x 6.0" x 4.0" (152mm x 152mm x 102mm) Exterior Overall Dimensions: 7.6" x 7.4" x 4.7" (192mm x 188mm x 120mm) Mounting Hardware: 1/4" Diameter, #12 (6 mm) Weight: 7.00lb (3.18 kg) In the Box: 3119 Enclosure Glands x 5 Labels Mounting hardware Instruction manual *Sold as an IndividualWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Brochure (pdf)

Read more less

NRX Refrigerator AC/DC ConverterDometic™'s AC/DC converter is needed for AC applications.

Read more less

Orion-Tr 12/24-5A 120W Isolated DC-DC ConverterRemote on/offThe remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch (see manual).All models are short circuit proof and can be paralleled to increase output current. An unlimited number of units can be connected in parallel.IP43 protectionWhen installed with the screw terminals oriented downwards.Screw terminals No special tools needed for installation.Input fuse On 12V and 24V input models only.Please contact your dealer for any returns, repairs or support issues related to this product. Specifications: Charger Input - Voltage: 12v Charger Output - Amps: 5a Charger Output Voltage: 24v Box Dimensions: 3"H x 5"W x 5"L WT: 1.15 lbs UPC: 8719076016724 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less

22mm Push Button Switch - Off/On Contact - Blue/Red LED - 4' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has a standard "Off/On" contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question.Features:4 ft. leadSpecifications: Function: Off-On (standard contact) Off/On: Blue/red Rear Mark Page: Red dot Switch Rating: 20A/12 – 24VDC   Material: Stainless steel Mechanical Life: 50,000 cycles     Electrical Life: 10,000 cycles InstallationDrill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications: Action: ON-OFF Color: Blue/Red Box Dimensions: 0"H x 0"W x 0"L WT: 0.41 lbs Quick Guide (pdf)Brochure (pdf)

Read more less

NS-12-20 StartGuardThe abrupt DC system voltage drop that accompanies engine starting can cause micro-processor-driven electronics aboard vehicles or vessels to "dump" programmed memory. StartGuard solves these problems by providing supplemental power to sensitive electronics while the engines are cranking. Newmar's NS-12-20 StartGuard supplies backup power for electronics during engine start. MountingMount the StartGuard in any convenient location, such as under the dash or console, using the four mounting screws provided or #10 bolts.WiringInput from the power source to the electronics must be routed through the StartGuard. Specifications: Input Voltage: 13.8-14.8 VDC nominal, 15.5 VDC Max Relay Activation Input Voltage: 7-15 VDC Output: 20 Amps Max Battery: 12 VDC, 4.0 Amp/Hour, Sealed Rechargeable, 3-5 Year Life (Typical) Backup Capacity (Fully Charged): 20 Amps for one minute/18 Amps for 2 minutes Operating Temperature Range: 0-40 degrees Celsius Winter Storage Temperature Range: -20 degrees to +40 degrees Celsius Dimensions: 8.25" x 4.9" x 3.5" Weight: 5.5 lbs This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

22mm Push Button Switch - Off/On Contact - Blue/Red LED - 1' LeadThis stainless-steel plated metal button can transform any dash by adding a touch of modern flair. This button has a standard "Off/On" contact.The body design combined with the included gasket gives this button switch a waterproof rating of IP69K. At night, every switch is backlit with blue LED light for unparalleled visibility. That light changes to red to let users know that the function is on without question. Features: 1 ft. lead 4-wire harness Rear Mark Page: Red dot Specifications: Function: Off-On (standard contact) Off/On: Blue/red Switch Rating: 20A/12 – 24VDC   Material: Stainless steel Mechanical Life: 50,000 cycles     Electrical Life: 10,000 cycles Installation:Drill a 22mm hole into any material up to 6mm thick. Connect the 3 contacts for the button (color-coded for safety and convenience). Lastly, connect the 2 contacts for the LED. Specifications: Action: ON-OFF Color: Blue/Red Box Dimensions: 0"H x 0"W x 0"L WT: 0.21 lbs Quick Guide (pdf)Brochure (pdf)

Read more less