Electrical

Relay 12V, 75AThis 12V, 75-amp relay is great for automotive applications. Bi-furcated contacts ensure long-term reliability and increased operating efficiency.Applications: Bi-furcated contact reduces contact bounce and increases long-term reliability. This enables the relay to conduct electrical switching more efficiently, reducing unnecessary heat buildup and contact wear. The high intermittent amperage rating of 150 amps for up to 3 seconds, makes this relay great for temporary high-equipment start-up amp draw applications. Offset input/output terminals and an integrated divider design help prevent accidental contact shorts A high-temperature rating of 125 degrees C/257 degrees F makes this a great relay for high-temperature installation environments like engine bays and other low-ventilation spaces. Features: Bullet-proof construction - Robust automotive grade relay with IP54 ingress protection and reinforced mounting tabs ensure secure mounting Dual mounting holes on either side for easy mounting with ¼-20”/M6 1.25 bolts or screws up to #14 screw Incorporate the highest quality materials for superior performance and have a high 100,000 electrical switching cycle capacity Enhanced vibration and shock protection ensures enhanced reliability, a long service life, and the operational readiness of the electrical system Specifications: Intermittent Current @ 3 SEC (Amps): 150 Ambient Temp. Rating (Low/High) (Celsius): -50/125 C Max Continuous Current (Amps): 75 @23 degrees C Electrical Endurance Rating (Cycles): 100,000 Initial Contact Resistance (6VDC) 50 mOhm Operating Voltage Range: 8.8-16VDC Focal Features:Long-Term ReliabilityBuilt from high-quality materials, this relay offers superior electrical switching performance for long-term use in applications.Locking HardwareZinc-plated M5-size input/output terminal screws with held-in-place nuts keep connections secure and allow easy tightening of wire terminations.Automotive GradeWide operational temperature ratings and shock/vibration resistance make this a great relay for an automotive electrical system. Meets or exceeds IEC 60068-2-27 and IEC 60068-2-6, IP54, and IEC 60068-2-2 ratings.Varied Fastener Sizes6mm x 8.7mm elongated holes accommodate up to 1/4-20" or M6x1.25 bolts or up to #14/1/4" sized screws and allow for centering adjustment when installing relays.Reinforced MountingRobust mounting tabs with strengthening gussets ensure the relay stays mounted securely, even through vibration, heat, and wire tension.Compact SizeA small mounting footprint is great for confined installation spaces where space is at a premium.Flat Blade ConnectorsShielded dual 6.3 x.03 mm flat male terminal connectors allow for quick, secure, and easy control wire connections.Offset TerminalsIntegrated divider tab design and varied mounting height input/output pads protect accidental contact shorts.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

100A Surface Mount Circuit Breaker - 285 SeriesThis 100A Egis circuit breaker protects electrical circuits from short-circuit events and overcurrent loads, preventing wire insulation overheating and subsequent destruction.Applications: Automatic circuit protection and manual on/off switching combine dual functionality in one reliable and compact solution Allows for circuit isolation and maintenance of load circuits by providing convenient switching and integral circuit protection capable of mounting adjacent to battery systems regardless of the location Features: Sealed against dust and water intrusion to ensure reliable circuit protection for the life of the electrical system installation  High Voltage (48 VDC) Rating - easily supports 12 and 24 VDC applications while offering advanced protection for 36 and 48 VDC High Electrical / Manual Switching Endurance delivers 6,000 cycles at full current High Interrupt Current - safely protects circuits connected to large paralleled battery banks with significant available power 4-Year Warranty - Egis stands behind its product's ability to meet the user's needs Specifications: Continuous Current Amps: 100 Max Voltage: 48 Cycling Endurance: 6,000 Interrupt Current @16 VDC (Amps): 5,000 Interrupt Current @28 VDC (Amps): 3,000 Ingress Protection Rating: IP67 Focal Features: ON/OFF High Visibility Controls - Sealed against dust and moisture penetration. High temperature rating for all installation locations. Integrated Terminal Insulators - Protect against inadvertent shorts from positive terminals to adjacent grounded surfaces. Stainless Steel Hardware / Serrated Flange Nuts - Corrosion and vibration resistance for harsh environment applications. Proudly Made in the USA - Made in the USA with high-quality components. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 100a Box Dimensions: 3"H x 3"W x 5"L WT: 0.2 lbs UPC: 850035199176 Quick Guide (pdf)

Read more less

Pro Installer Link Bar 35.5 - 42.5mm *5-PackPro Installer link bars provide the fastest and most economical way of connecting the Pro Installer line of products to save space and allow for the most compact installations. The common interconnection height of Pro Installer components allows link bars to quickly and easily convert a group of different products into a functional cluster. Pro Installer link bars are made of high purity copper and are tin plated for optimum marine electrical performance. Links can be doubled to accommodate higher loads.

Read more less

15A Battery Charger - 24V - 3-Bank - 3-Stage w/Dip Switch & LugsThis advanced fully automatic three-stage 15 Amp battery charger is ideal for charging all types of 24 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.Features: High efficiency Commercial Grade Lightweight Quiet operation Industry Proven Design – 1000s of units in operation 2 or 3 stage charging (user selectable) 120 or 230 VAC, 50/60 Hz (user selectable) Voltage meter display – Ammeter and LED power status For all types of Lead Acid batteries Charge with a battery load or stand alone Use as a power supply or DC UPS UPC: Universal Protection Circuit – short circuit, overload, reverse battery polarity Charge 3 banks of batteries at once – no isolator necessary Specifications: Input: 120 VAC or 230 VAC Output: 24 VDC Amps: 15 Amps Remote Control: 900-RC Weight: 6 (lbs) Weight: 2.72 (kg) Dimensions: 10.5 x 8.5 x 3 (in) Dimensions: 26.7 x 21.6 x 7.6 (cm) Safety: Listed to UL Standard UL-1564, EMI Compliant to FCC Part 15(B), Class B Warranty: 2 Year Limited Applications: Automotive Recreational vehicles Marine Communications sites Battery back-up systems WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Charger Output Voltage: 24v Charger Output - Amps: 15a Charging Banks: 3 Portable: No Charger Input - Voltage: 120/240v Box Dimensions: 5"H x 10"W x 14"L WT: 7.1 lbs UPC: 622988083051 Owner's Manual (pdf)Brochure (pdf)

Read more less

600W Pure Sine Wave Inverter - 24VPST Series (120 VAC)This high efficiency DC-AC inverter converts 24 Volts DC to 600 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with pin-type battery cable lugs. Features include built-in electronic GFCI, overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.Features: High efficiency Temperature controlled cooling fan – reduces energy consumption Low interference Wide operating DC input range: 21.4 - 33.0 VDC Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit Low idle power draw Dual GFCI protected AC outlets Optional remote control (sold separately): Model RC-15A Comes with pin-type battery cable lugs Safety certified to UL standards, FCC compliant Specifications: Input: 24 VDC Output: 120 VAC Watts: 600 Watts Surge: 1000 Watts Remote Control: RC-15A sold separately Weight: 5.9 (lbs) Weight: 2.7 (kg) Dimensions: 9.37 x 10.87 x 3.23 (in) Dimensions: 238 x 276.2 x 82 (mm) Safety: ETL to UL Standards Warranty: 2 Year Limited Applications: Service vehicles Mobile Offices Boats Recreation Vehicles, Camping Telecommunication Field work / Construction sites Solar power systems Emergency backup power Home electronics: TV, VCR, video games Computers, printers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 600w Outlet Qty: 2 Duplex GFCI Inverter Input Voltage: 24v Waveform: Pure Sine Wave Box Dimensions: 6"H x 11"W x 14"L WT: 7.2 lbs UPC: 622988072161 Owner's Manual (pdf)Brochure (pdf)

Read more less

300W Pure Sine Wave Inverter - 24VPST Series (120 VAC)This high efficiency DC-AC inverter converts 24 Volts DC to 300 Watts of pure sine-wave AC power at 120 Volts, 60 Hz. The unit comes with detachable cable with 12V plug adaptor and cable with battery clamps. Features include overload protection, low battery alarm / shut down, low idle power draw of less than 0.5 Amps. AC power is available from a NEMA-20R GFCI duplex outlet on the front panel. Safety certified to UL standards.Features: High efficiency Temperature controlled cooling fan – reduces energy consumption Low interference Wide operating DC input range: 21.0 - 33.0 VDC LED indicators for power and protections Low idle power draw Dual GFCI protected AC outlets Commercial grade design suitable for heavy duty loads, long periods of continuous operation & for emergency back up UPC – Universal Protection Circuit: low voltage, over voltage, over temperature, over load and short circuit Detachable cable with 12V plug adapter Detachable cable with battery clamps Safety certified to UL standards, FCC compliant Specifications: Input: 24 VC Output: 120 VAC Watts: 300 Surge: 500 Watts Weight: 3.46 (lbs) Weight: 1.57 (kg) Dimensions: 6.1 x 9.69 x 2.58 (in) Dimensions: 155 x 246 x 65.5 (mm) Safety: ETL to UL Standard Warranty: 2 Year Limited Applications: Service vehicles Mobile Offices Boats Recreation Vehicles, Camping Telecommunication Field work / Construction sites Solar power systems Emergency backup power Home electronics: TV, VCR, video games Computers, printers WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Inverter Cont. Output Wattage: 300w Outlet Qty: 2 Duplex GFCI Inverter Input Voltage: 24v Waveform: Pure Sine Wave Box Dimensions: 5"H x 8"W x 12"L WT: 4.9 lbs UPC: 622988072147 Owner's Manual (pdf)Brochure (pdf)

Read more less

XD Flex 2 Dual VSR/Relay with Knob - Tinned WiresFeatures: 500 Amp Continuous Capability Per Relay / Extremely Compact Footprint Available With or Without Intuitive Front Facing Manual Override Knobs with the ability to Lock Relays ON or OFF for Servicing Flexible Functionality via Dip Switches, utilize each as a Relay/Battery Disconnect, Voltage Sensing Relay, or Low Voltage Disconnect Improved Alternative Replacement to Legacy Remote Switching Solutions. Remote ON/OFF/Auto Inputs Allow Forced Close or Open or Allow Automatic Operation Based on Voltage Sensing Local and Remote LED Indicators Per Relay Mechanical Only Contactor Options This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Electric Box Dimensions: 3"H x 6"W x 7"L WT: 1.89 lbs UPC: 850053879333 Brochure (pdf)

Read more less

12 Position Male Sealed Deutsch Connector Busbar - 5/16" StudThis waterproof busbar is designed for Deutsch-style DT connectors and built to resist moisture, corrosion, and vibration. With its rugged housing and sealed construction, it’s ideal for marine, off-road, and industrial power distribution where reliability is critical.Key Benefits of the Waterproof Busbar: Compact design supports multiple circuits in one sealed unit Protects against salt spray, dirt, and harsh weather conditions Simplifies wiring for lights, sensors, and other accessories Delivers clean, low-maintenance connections in demanding environments When durability and protection matter, trust this sealed DT busbar to keep your electrical system safe and dependable. Brochure (pdf)

Read more less

Dual 12 Position Male Sealed Deutsch Connector Busbar - 5/16" StudThis sealed dual-input busbar features 12 positions for Deutsch DT connectors, offering secure, waterproof connections for complex systems.Ideal for combining protected inputs and outputs in one unit, this dual DT busbar simplifies wiring in marine, off-road, and industrial applications. Built to handle harsh environments, it reduces clutter while maintaining signal integrity and power flow.The compact, molded housing resists moisture and vibration, making it perfect for high-demand electrical installations where durability and efficiency matter most. Use the dual DT busbar to streamline circuit layouts and ensure long-term reliability in sealed systems. Quick Guide (pdf)Brochure (pdf)

Read more less

T-H FLEX™ 2" Expandable Braided Sleeving - 50' RollT-H FLEX™ is a lightweight, braided jacketing for bundling and protecting wires, cables and hoses. Braided from high temperature yarns, T-H FLEX™ offers total protection for wire and cable assemblies. The unique expansion characteristics makes T-H FLEX™ easy to slip on. Only a few sizes are needed to cover a large diameter range, since each size of T-H FLEX™ expands up to four times its normal diameter.  The sleeving cuts easily and cleanly with a hot knife and once installed, will beautify and protect any wire, hose or cable application.Features: Lightweight Protective Sleeving Protects Wire, Cables and Hoses Braided from High Temperature Yarns Chemical Resistant Simplifies and beautifies any rigging application Specifications: Type: Misc Box Dimensions: 6"H x 9"W x 10"L WT: 2 lbs UPC: 733572036855

Read more less

48" Zippered Rigging Sleeve - BlackProtect your cables and hoses with this easy to remove rigging sleeve. Made of rugged Sunbrella® fabric, this sleeve will withstand the elements and resist fading. Easily zips on and off to access cables of hoses when needed. Ends are secured with cable ties sewn into pockets.Features: Zips On and Off to Protect Cables and Hoses Rugged Sunbrella® – Weather & UV Resistant Ends are Secured with Cable Ties WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Misc Box Dimensions: 4"H x 6"W x 9"L WT: 0.42 lbs UPC: 733572041606

Read more less

Temperature SensorDolphin Charger Temperature Sensor for Pro Chargers and Bat View.

Read more less