Engine Parts & Service

Original Equipment Quality Replacement Solenoid for BRP-OMC & Evinrude E-TECReplacement solenoid that will fit BRP-OMC, EVINRUDE E-TEC, 2010-UP 15 HP-300 HP.Replaces:BRP-OMC 587020*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Portable Fuel Tank - 6 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Includes gauge.Features: 6 Gallon fuel capacity Compatible with 1/4" NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve Cap with built-in vacuum valve means no need for manual venting High-contrast & easy to read gauge Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 19.82" Width: (inch) 13.50" Height: (inch) 9.16" *Fuel line is not includedWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

3-1/2" x 36" Blue Silicone Wet Exhaust HoseTrident Silicone Marine Wet Exhaust Hose gives the best performance with a cool quiet elegance. Silicone naturally handles higher temperatures and will last longer than rubber exhaust hoses. The silicone will also transfer less heat into the engine room. The 202V series Silicone Wet Exhaust products are designed for short straight connections and come with a 10-year warranty.Trident Silicone Marine Wet Exhaust & Water-Coolant Hose is the ultimate in extra thick soft wall silicone quality with very high temp. performance and extra long service life. Exceeds SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards. #202V Glossy Blue “Very Hi Temp” has 4-6 ply polyester reinforcement and 350°F (177°C) Max. Used worldwide on premium boats, yachts, and special service vessels. It has become the super yacht standard.Specifications: 10-year warranty Tube & Cover: High-temp silicone Color: Blue Reinforcement: Polyester reinforcement Temperature Range: 350°F (176.7°C) Lengths: 3’ (.914m), 6’ (1.83m), 12’ (3.66m) *Burst Pressure is 4 x Working Pressure*All wet exhaust hose to be used on open-ended systems Specifications: ID Diameter (inches): 3-1/2" Length (Feet): 3' Box Dimensions: 4"H x 4"W x 36"L WT: 4 lbs UPC: 704917003122 Quick Guide (pdf)

Read more less

3" x 36" Blue Silicone Wet Exhaust HoseTrident Silicone Marine Wet Exhaust Hose gives the best performance with a cool quiet elegance. Silicone naturally handles higher temperatures and will last longer than rubber exhaust hoses. The silicone will also transfer less heat into the engine room. The 202V series Silicone Wet Exhaust products are designed for short straight connections and come with a 10-year warranty.Trident Silicone Marine Wet Exhaust & Water-Coolant Hose is the ultimate in extra thick soft wall silicone quality with very high temp. performance and extra long service life. Exceeds SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards. #202V Glossy Blue “Very Hi Temp” has 4-6 ply polyester reinforcement and 350°F (177°C) Max. Used worldwide on premium boats, yachts, and special service vessels. It has become the super yacht standard.Specifications: 10-year warranty Tube & Cover: High-temp silicone Color: Blue Reinforcement: Polyester reinforcement Temperature Range: 350°F (176.7°C) Lengths: 3’ (.914m), 6’ (1.83m), 12’ (3.66m) *Burst Pressure is 4 x Working Pressure*All wet exhaust hose to be used on open-ended systems Specifications: ID Diameter (inches): 3" Length (Feet): 3' Box Dimensions: 4"H x 4"W x 36"L WT: 3 lbs UPC: 704917003092 Quick Guide (pdf)

Read more less

3-1/2" ID 45-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.Features: Four stainless steel clamps are included This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards) Black high-temp EDPM rubber  Construction: Color: Black Reinforcement: Reinforcing ribs on 6” I.D. and above Temperature Range: up to 250°F (121°C) Specifications: Inner Diameter: (inch) 3.5” / (mm) 88.9  Outer Diamter: (inch) 4.0" / (mm) 101.6 A: (inch) 1.5” / (mm) 38.1 B: (inch) 1.5” / (mm) 38.1  C: (inch) 5.5” / (mm) 139.7 W: (inch) 0.25” / (mm) 6.35 Elbow Degree: 45 degrees Weight: (Lb/Ea) 0.7 / (Kg/Ea) 0.32 Specifications: ID Diameter (inches): 3-1/2" Box Dimensions: 7"H x 8"W x 8"L WT: 1.7 lbs UPC: 704917001500 Quick Guide (pdf)

Read more less

4" ID 90-Degree EPDM Black Rubber Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident EPDM marine wet exhaust connections are molded of high-temperature black EPDM rubber with a smooth bore and cover; except elbows of 6” I.D. or bigger have molded reinforcing ribs on the outside.Features: Four stainless steel clamps are included This elbow has excellent resistance to ozone, salt water, diesel fumes and splashes, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards) Black high-temp EDPM rubber Construction: Color: Black Reinforcement: Reinforcing ribs on 6” I.D. and above Temperature Range: up to 250°F (121°C) Specifications: Inner Diameter: (inch) 4” / (mm) 101.6 A: (inch) 5.75" / (mm) 146 B: (inch) 5.75” / (mm) 146 C: (inch) 1.75” / (mm) 44.4 D: (inch) 1.75” / (mm) 44.4 R: (inch) 2” / (mm) 50.8 W: (inch) 0.25” / (mm) 6.4 Elbow Degree: 90 degrees Specifications: ID Diameter (inches): 4" Box Dimensions: 7"H x 7"W x 8"L WT: 2.6 lbs UPC: 704917000411 Quick Guide (pdf)

Read more less

4" ID 90-Degree Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt ClampsTrident silicone-blend rubber marine wet exhaust connections. They are molded in very high-temperature blue silicone EPDM blended rubber with a smooth bore and cover. Features: Four stainless steel t-bolt clamps Very high temp silicone/EDPM blend rubber - molded This elbow has excellent resistance to ozone, salt water, diesel fumes, splash, cold, heat, and aging Exceeds (SAE J2006-R1, and ABYC & NMMA P-1) exhaust standards  Blue very high-temperature silicone blended with EDPM rubber at 350°F (177°C) max continuous Construction: Color: Blue Temperature Range: up to 350°F (177°C) Specifications: Inner Diameter: (inch) 4” / (mm) 101.6 A: (inch) 5.75” / (mm) 146 B: (inch) 5.75” / (mm) 146 C: (inch) 1.75” / (mm) 44.4 D: (inch) 1.50" / (mm) 38.1 R: (inch) 2” / (mm) 50.8 W: (inch) 0.25" / (mm) 6.4 Elbow Degree: 90 degrees Specifications: ID Diameter (inches): 4" Box Dimensions: 8"H x 8"W x 8"L WT: 2.6 lbs UPC: 704917002071 Quick Guide (pdf)

Read more less

316 SS Non-Perforated Worm Gear Hose Clamp - 15/32" Band - (5/8" – 15/16") Clamping Range - 10-Pack - SAE Size 8Premium Marine Grade, all AISI 316 (high tensile strength) Stainless Steel “HD NON-PERF” Worm Gear Hose Clamp. The 11.7 mm (0.46”) wide band is Non-Perforated and Smooth on the inside with Rolled Edges. This eliminates hose damage with increased clamping force. The High Strength, Compact, One Piece 16mm (0.63”) wide Housing provides one of the highest clamping force ratings of any worm gear style clamp.  Features: The screw head is 7mm Long service life and safety for most general-purpose hose applications and connections Recommendations: Measure hose O.D. before selecting clamp size for proper fit Double clamp on each hose end for critical applications Consider using our #720 Series wide band 316 SS T-Bolt Clamps for larger I.D. hoses (i.e. Exhaust Hose, etc.) Construction: Band & Housing: 316 Stainless Steel 11.7 mm wide band – 0.9mm thick Screw Drive: 316 Stainless Steel 7.0 mm screw head Specifications: SAE Size: 8 Hose Inner Diameter: (inch) 3/8" – 1/2" Clamping Range: (inch) 5/8" – 15-16" / (mm) 15-24 Recommended Torque Inch lbs: 35-45 Quick Guide (pdf)

Read more less

Ignition Coil for Mercruiser, Volvo Penta & OMC Inboard EnginesIgnition Coil for Mercruiser, Volvo Penta, and OMC inboard engines. Requires external resistor.Engine Brand: Mercury / Mercruiser OMC Volvo Penta Fitment:Uses External Resistor (For all Applications) Brochure (pdf)

Read more less

Compact Carbon CanisterCarbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.Features: This is a single pack that contains two Compact Carbon Canisters Brackets OEM Installed Low permeation shell reduces overall system emissions Can be mounted in any orientation using brackets provided EPA / CARB Certified Fits a 5/8" vent hose Specifications:  Trailerable Vessel Capacity (EPA Rating): 70 Gallon Non-Trailerable Vessel Capacity (EPA Rating): 110 Gallon Trailerable Vessel Capacity (CARB Rating): 56 Gallon Non-Trailerable Vessel Capacity (CARB Rating): 110 Gallon  *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Kit 621 Series 100A Single FT Alt MC Reg T SensorKit Includes: 621-100-SV Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware621-100-SV Alternator: 100A, 12V, Spindle Mount (Single Foot), 1-2in, Single Deep Vee Pulley, Isolated Ground1" Motorola-Style Mounting;  Typical for Westerbeke, Lehman, Hino & Pathfinder Engines2" Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based EnginesReplaces:621-VUP-MC-100-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 100A Voltage: 12v Box Dimensions: 10"H x 11"W x 14"L WT: 16.2 lbs UPC: 676205000543 Brochure (pdf)

Read more less

2-1/2" ID 45° Blue Silicone Molded Wet Exhaust Elbow with 4 T-Bolt ClampsSilicone & Rubber Elbows and Hump Hose Bellows provide the ultimate flexible connectors for Marine Wet Exhaust Systems. They offer much greater tolerance to heat, misalignment, engine movement, and vibration, with significant savings in cost, parts, labor, and space. Highest max. continuous operating temps.Features:Blue Very High Temps: Silicone 350°F (177°C)Specifications: 2-1/2" ID Color: Blue Silicone 4 T-Bolt Clamps Quick Guide (pdf)

Read more less