Engine Parts & Service

Original Equipment Quality Replacement Solenoid for BRP-OMC & Evinrude E-TECReplacement solenoid that will fit BRP-OMC, EVINRUDE E-TEC, 2010-UP 15 HP-300 HP.Replaces:BRP-OMC 587020*ARCO Assurance 12-month part and labor warranty protectionThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Portable Fuel Tank - 6 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Rugged materials and innovative design stand up to harsh marine conditions. 6-gallon tank adapts to virtually any outboard engine. Includes gauge.Features: 6 Gallon fuel capacity Compatible with 1/4" NPT fuel fittings Additional oil and ullage/vapor capacity EPA Cap with automatic, high-flow vacuum valve Cap with built-in vacuum valve means no need for manual venting High-contrast & easy to read gauge Automotive-grade, multi-layer construction withstands the pressure build-up associated with closed fuel systems Meets EPA and CARB (California Air Resources Board) regulations Complies with all ABYC/NMMA requirements for portable marine fuel tanks Dimensions: Length: (inch) 19.82" Width: (inch) 13.50" Height: (inch) 9.16" *Fuel line is not includedWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Fuel Stabilizer - 32oz *Case of 12*STA-BIL Storage Fuel Stabilizer keeps fuel fresh for quick and easy starts after storage. Alternatively, the additive works wonders to keep the gasoline in the car fresh if users aren’t visiting the pump as often. STA-BIL Storage Fuel Stabilizer removes water to prevent corrosion and cleanses carburetors and fuel injectors. The product also protects the engine from gum, varnish, rust, and corrosion to prolong the life of any engine. One treatment eliminates the need to drain the gasoline of any two- or four-cycle engine before storing. Additionally, the product works well to keep fuel fresh in the everyday vehicle if it has been sitting idle for longer than usual.*This case contains TWELVE 32 fluid-ounce bottles of STA-BIL Fuel Stabilizer. Features: America’s #1 fuel stabilizer treatment Keeps fuel fresh for long-term storage – up to 24 months Eliminates the need to drain fuel before storage Ensures quick, easy starts by preventing gum and varnish build-up* Effective in Ethanol and Non-Ethanol gasoline For use in all gasoline engines such as vehicles, motorcycles, two-cycle, small engines, generators, and boats Usage Directions:Use STA-BIL Storage Fuel Stabilizer in any gasoline-powered vehicle or equipment users plan to store for 30 days or longer. This keeps the fuel fresh for up to 24 months during storage, eliminating the need to drain the tank. It works effectively in all gasoline blends, including ethanol-blended fuel, up to E-85. 1 ounce (30- milliliters) treats up to 2½ gallons (9.5 liters) of fuel. Use STA-BIL only with fresh fuel and keep the gas can or tank 95% full to avoid condensation buildup in the tank during storage. Run the engine for 5 minutes after adding the product to treat the entire fuel system. The product does not contain alcohol. Perfect for collector cars, generators, lawnmowers, snowblowers, etc.Perfect for Storing: GAS CANS: Fill a gas can with fresh fuel and immediately protect the fuel with STA-BIL Storage Fuel Stabilizer OUTDOOR POWER EQUIPMENT: When storing lawnmowers, weed whackers, leaf blowers, and other outdoor power equipment, first fill the gas can at the station and then add STA-BIL Storage Fuel Stabilizer to the gas can. Afterward, fill up the equipment (such as a trimmer, generator, or snow thrower, etc.) and run for a few minutes. This ensures that the entire fuel system is protected CLASSIC AUTOMOBILES: When storing the vehicle (modern or classic), fill the tank 95% with fresh fuel, add STA-BIL Storage Fuel Stabilizer, and run for a few minutes. This ensures that the entire fuel system is protected. Store it in a dry place that is protected from environmental elements. Place a car cover on for additional storage protection EVERYDAY AUTOMOBILES: When visiting the gas station to pour fresh fuel into the tank, top it off with STA-BIL Storage Fuel Stabilizer and run for a few minutes. This practice works best if the vehicle has been sitting for longer than usual due to working remotely, limited road trips, or less use of the vehicle overall MOTORCYCLES/ATVS/UTVS: When storing the toys, fill the tank 95% with fresh fuel, add the STA-BIL Storage Fuel Stabilizer, and run for a few minutes. This ensures that the entire fuel system is protected. Store it in a dry place that is protected from environmental elements. Place a motorcycle cover on for additional storage protection BOATS: When storing a jet ski or boat (inboard or outboard), fill the tank 95% with fresh fuel, add STA-BIL Storage Fuel Stabilizer, and run for a few minutes. This ensures that the entire fuel system is protected. Place a jet ski or boat cover on for additional storage protection Specifications: Type: Engine & Fuel Box Dimensions: 3"H x 4"W x 10"L WT: 22.8 lbs

Read more less

Alternator Protection Module - 48VThe Balmar APM provides best-in-class surge protection using the latest technology developed for the automotive industry. Protect Alternators From Damaging Effects: Battery switch disconnects Lithium battery BMS disconnects Surges from solenoids, combiners, starters, and other motors. The Balmar APM excels in both short-duration and longer-duration spikes, where other products fail.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Alternator 100 AMP 12V 1-2" Single Foot Spindle Mount K6 Pulley with Isolated GroundAlternator, 621 Series, 100A, 12V, Spindle Mount (Single Foot), 1-2in, K6 Serpentine Pulley, Isolated Ground 1" Motorola-Style Mounting;  Typical for Westerbeke, Lehman, Hino & Pathfinder Engines 2" Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based EnginesReplaces: 621-100-SR-IGThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Alternator Protection Module APM24 - 24VAlternators can be subjected to voltage spikes caused by lithium battery shutdowns, intermittent connections, and other over-voltage events.  Balmar has introduced a robust Alternator Protection Module which helps to protect the alternator’s diodes and internal voltage regulator against spikes (clamping up to 60V) and sustained over-voltage conditions (beginning around 20V for the 12V version).  The APM can absorb multiple surges of such energy and can absorb surges in excess of 200 amps without failure to continually protect your alternator.  Visual and audible alarms indicate if the device has been compromised and needs replacement.Balmar APM devices provide intelligent, robust, solid-state protection in a small easily mounted package at the rear of the alternator between the B+ and B- terminals.  Balmar APM devices can be used to protect all alternator brands.  Balmar APM devices meet ISO 16750-2 for Load Dump Protection and ISO 7637-2 for Surge Protection.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Alternator Protection Module APM12 - 12VAlternators can be subjected to voltage spikes caused by lithium battery shutdowns, intermittent connections, and other over-voltage events.  Balmar has introduced a robust Alternator Protection Module which helps to protect the alternator’s diodes and internal voltage regulator against spikes (clamping up to 60V) and sustained over-voltage conditions (beginning around 20V for the 12V version).  The APM can absorb multiple surges of such energy and can absorb surges in excess of 200 amps without failure to continually protect your alternator.  Visual and audible alarms indicate if the device has been compromised and needs replacement.Balmar APM devices provide intelligent, robust, solid-state protection in a small easily mounted package at the rear of the alternator between the B+ and B- terminals.  Balmar APM devices can be used to protect all alternator brands.  Balmar APM devices meet ISO 16750-2 for Load Dump Protection and ISO 7637-2 for Surge Protection.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Alternator 100 AMP Kit 12V 3.15" Dual Foot Saddle Single Vee Pulley Regulator & Temp SensorKit Includes: a 60-100-SV Alternator, MC-618 Regulator, Temperature Sensors, Mounting Hardware60-100-SV Alternator: 100A, 12V, Saddle Mount (Dual Foot), 3.15in, Single Deep Vee Pulley, Isolated GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: 60-YP-MC-100-SR-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Alternator 170 Amp, 12V Single Foot Internal Regulator K6 PulleyAlternator, XT Series, 170A, 12V, Spindle Mount (Single Foot), 1-2in, K6 Serpentine Pulley, Case Ground1″ Motorola-Style Mounting;  Typical for Westerbeke, Lehman, Hino & Pathfinder Engines2″ Delco-Style Mounting;  Typical for Volvo Penta (Gas & Diesel), John Deere, Perkins, Mercruiser, Pleasurecraft, Crusader, Indmar, Marine Power & other GM-based EnginesThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Voltage: 12v Amperage: 170A Box Dimensions: 9"H x 9"W x 10"L WT: 14.3 lbs UPC: 676205501996 Brochure (pdf)

Read more less

Temp Sensor Battery - 20'Temperature Sensor, Battery - 20' LengthThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Temp Sensor Alternator - 54"Temperature Sensor, Alternator - 54" LengthThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Universal Fuel Line Kit - 3/8" Diameter x 6' LengthThis Attwood Fuel Line Kit is a reliable universal replacement for the original equipment on any brand of engines and tanks. This kit includes a 6-foot-long, 3/8-In. diameter fuel line and a multi-layer, low-permeation primer bulb. Features: 3/8" x 6' Low Permeation Hose Universal for any engines and tanks Multi-layer low-permeation primer bulb with 60% more fuel output compared to competitors Reliably delivers fuel to your engine *Does not include fittings for the tank end and for the engine end Specifications: ID Diameter (inches): 3/8" Length (Feet): 6' Box Dimensions: 3"H x 8"W x 12"L WT: 0.8 lbs UPC: 022697938060 Quick Guide (pdf)

Read more less