Engine Parts & Service

3" x 36" Blue Silicone Wet Exhaust HoseTrident Silicone Marine Wet Exhaust Hose gives the best performance with a cool quiet elegance. Silicone naturally handles higher temperatures and will last longer than rubber exhaust hoses. The silicone will also transfer less heat into the engine room. The 202V series Silicone Wet Exhaust products are designed for short straight connections and come with a 10-year warranty.Trident Silicone Marine Wet Exhaust & Water-Coolant Hose is the ultimate in extra thick soft wall silicone quality with very high temp. performance and extra long service life. Exceeds SAE J2006-R1, and ABYC & NMMA P-1 exhaust standards. #202V Glossy Blue “Very Hi Temp” has 4-6 ply polyester reinforcement and 350°F (177°C) Max. Used worldwide on premium boats, yachts, and special service vessels. It has become the super yacht standard.Specifications: 10-year warranty Tube & Cover: High-temp silicone Color: Blue Reinforcement: Polyester reinforcement Temperature Range: 350°F (176.7°C) Lengths: 3’ (.914m), 6’ (1.83m), 12’ (3.66m) *Burst Pressure is 4 x Working Pressure*All wet exhaust hose to be used on open-ended systems Quick Guide (pdf)

Read more less

Primer Bulb - 5/16" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features: It is intended for use with a 5/16-inch interior diameter hose Exclusive high-efficiency check-valves deliver faster priming and low fuel restriction (less than 1kPa restriction at 50 liters/hour) Engineered hose barbs and stainless steel stepless clamps ensure leak-free performance This bulb is compatible with Ethanol blended fuels, and it is EPA and CARB certified Specifications: ID Diameter (inches): 5/16" Box Dimensions: 5"H x 5"W x 5"L WT: 0.55 lbs UPC: 022697935168 Quick Guide (pdf)

Read more less

Premium Replacement Tilt Trim Motor for Late Model Mercruisers with Oildyne PumpReplacement outboard tilt trim motor that will fit late model Mercruiser w/Oildyne pump, Ring Terminal Ends. ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces: MERCURY 14336A6 MERCURY 14336A8 MERCURY 14336A9 MERCURY 14336A12 MERCURY 14336A15 MERCURY 14336A17 MERCURY 14336A20 MERCURY 14336A25 MERCURY 14336A31 MERCURY 865380A03 MERCURY 865380A13 MERCURY 88183A5 MERCURY 88183A6 MERCURY 88183A8 MERCURY 88183A11 MERCURY 88183A12 MERCURY 88183A13 MERCURY 88183A25 SERRA 18-6769 / 18-6769-1 SIERRA 18-6813 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Premium Replacement Alternator with 65mm Multi-Groove Pulley - 12V 70AReplacement alternator that will fit Mercruiser 4.3L - 8.2L, 1998-Up, 12 Volt, 70 AMP, Internal Fan, 65-mm multi-groove serpentine pulley included.Features: All alternators are engineered for performance and reliability All alternators are engineered and manufactured with precision and quality All alternators must meet or exceed OEM performance before being boxed Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Replaces:DELCO Alternator 19020601DELCO Alternator 19020609MERCURY Alternator 862031TMERCURY Alternator 862031T1Sierra Alternator 18-6293Protorque Alternator PH300-0034Protorque Alternator PH300-0035MPPARTS Alternator ADR0299MPPARTS Alternator ADR0316This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Amperage: 70A Voltage: 12v Box Dimensions: 7"H x 8"W x 8"L WT: 7.6 lbs UPC: 693006008172 Quick Guide (pdf)

Read more less

Zeus A275L J180 4" Alternator with Isolated Ground & Terminal BlockThe highest power output alternator in its size/class. Features: Engineered for high energy production. Suitable for marine, RV, military, and commercial applications. Rapidly charges large battery banks. Coolest operating temperatures for increased performance. Heat shedding coatings Rectifier located on housing exterior Dual cooling fans OEM components Optimized for performance at idle speeds. Reduces the need for a generator by creating additional power with your engine. Unleash peak performance with E-Coat/Cerakote, keeping the A275L cooler for sustained amperage output. Use the ARCO Zeus Bluetooth Alternator Regulator for maximum performance or lithium battery charging. SAE J1171 Certified. Models available with internal/external voltage regulator. Proudly made in the U.S.A. Technical Specifications: Voltage - 12v Field Type - P Rotor Poles - 16 Stator Size - 138mm Frame Size - Large Weight - 14.9 lbs/6.7 kg Regulation - Internal/External (Internally regulated with adaptor for optional external regulation.) Output Voltage - 14.1v (Default) Finish - (Black) Cerakote or E-coating Cut-In RPM - 1,061 Alternator RPM Maximum Alt RPM - 19,000 Battery Post - M8 Thread Post, Side Mount Standard Pulley - 49K6 (6-groove, 49mm) Pulley Mount - 17mm diameter shaft, 25mm long, threaded M17 x 1.5 Pulley Hardware - M17 x 1.5 x 24mm nut, w/ 18mm ID x 29mm OD washer (Included) Diodes - 6 positive, 6 negative, 50A Rated, Avalanche Max Output (Cold, 9,000 RPM) - 311 Amps Sustained Cruising Output (Hot, 6,000 RPM) - 227 Amps Sustained Idle Output (Hot, 3,000 RPM) - 198 Amps Max Continuous Operating Temperature - 110°C / 230°F Mounting Applications:Replaces most Volvo Penta alternators using a 4” J180 saddle-style mount Quick Guide (pdf)Brochure (pdf)

Read more less

Replacement Outboard Tilt Trim Motor - Honda/Suzuki - 4 Bolt MountQuality Assurance: Epoxy Powder coated for maximum corrosion protection Motor shafts induction case hardened at bearing surfaces for superior wear resistance Precision Testing: All armatures tested to withstand 50 times operation voltage (12V) All motors performance tested at 5 different load levels All motors must meet or exceed OEM performance before being boxed  Warranty Information:When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications. Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration Fits:  HONDA 2002-Up BF175, BF200, BF225, 4-bolt mount, Round Plug-In Connector. Includes O-ring. SUZUKI 2002 and up 175, 200 & 225hp 4 Stroke Replaces Part Numbers:  HONDA Tilt Trim Motor 36120-ZY3-013 SUZUKI Tilt Trim Motor DF140TLK2 SUZUKI Tilt Trim Motor DF140TXK2 SUZUKI Tilt Trim Motor DF140TXZK2 SUZUKI Tilt Trim Motor DT150TCXK2 SUZUKI Tilt Trim Motor DT225TCXGK2 SUZUKI Tilt Trim Motor DT225TCXK2 SIERRA Tilt Trim Motor 18-6742 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Alternator 170 AMP Kit 12V 3.15" Dual Foot Saddle J10 Pulley Regulator & Temp SensorKit Includes: XT-DF-170-J10 Alternator, MC-618 Regulator, Temperature Sensors & Mounting HardwareXT Series Alternator: 170A, 12V, Saddle Mount (Dual Foot), 3.15in, J10 AltMount Serpentine Pulley, Case GroundHitachi-Style Mounting; Typical for Yanmar, Westerbeke, Lehman & Perkins-Sabre EnginesReplaces: AT-DF-MC-165-KIT, AT-DF-165-J10-KITThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Mercury Tank Fitting - 1/4" NPT ThreadConnect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.Features: Solid machined brass for dependable performance, peace of mind Quick-connect ¼-inch male thread makes installation easy Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel 1/4" NPT (National Pipe Thread) Specifically designed for Mercury/Mariner Brand engines and tanks *Specifically mates to Attwood part number: 8890LP6 Quick Guide (pdf)

Read more less

Marine Fuel Pump for Mercury Low Pressure 4.3 LH, LX, LXHFuel Pump Assembly for Mercruiser engines: MCM 262 Mag EFI, 4.3L/LX & 4.3LH/LXHEngine Brand:MercruiserFitment: MCM 262 Mag EFI, 4.3L/LX & 4.3LH/LXH

Read more less

Johnson/Evinrude/OMC (Outboard Marine Corporation) Female Hose Fitting - Tank Or Engine End - 5/16" BarbFor use on both ends of the fuel line to connect tank fitting and motor. The hose barb fits a 5/16" inner diameter hose.Features: Johnson, Evinrude, and OMC fitting Tank or Engine End Material Construction: Acetal *Specifically mates to Attwood part number: 8883-6 Quick Guide (pdf)

Read more less

Johnson/Evinrude/OMC (Outboard Marine Corporation) Male Tank Fitting - 1/4" NPTThis Attwood male tank fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The threaded fitting has a 1/4" male NPT thread and uses thread sealant on all threads. Clamps are not included.Features: Johnson, Evinrude, and OMC fitting Quick-connect ¼-inch male thread makes installation easy Solid machined brass for dependable performance, peace of mind *Specifically mates to Attwood part numbers: 8889LP6 & 88FHE516-6 Quick Guide (pdf)

Read more less

Distributor Cap for GM V-8 Engines with Thunderbolt IV & V HEI IgnitionsDistributor Cap for GM V-8 Engines with Thunderbolt IV and V HEI Ignitions.Engine Brand: Mercury / Mercruiser OMC Fitment:GM V-8 Engines with Thunderbolt IV & V HEI Ignitions Brochure (pdf)

Read more less