Entertainment - Amplifiers

ME60BT Bluetooth Wireless Marine Grade Amplifier with Waterproof Control PadThe ME60BT is a four channel, 120W RMS Bluetooth wireless audio amplifier capable of delivering up to 30W RMS per channel. It has a compact, water resistant design that allows for flexible mounting possibilities. The control keypad is designed to withstand installation in the gas zone of a portable spa and is equally suited for use in a marine environmentThe unit accepts either audio streamed via Bluetooth connection or hard wired input via RCA input. The waterproof control pad is easily mounted as the body of the keypad is threaded and the large mounting nut is tightened against the back side of the mounting surface.Features: Powers up to (8) 4ohm speakers Internal distortion limiting circuits Dedicated Subwoofer gain level control External waterproof control pad included Water resistant design for spa or marine use Rear channels switchable from full range to powered sub out Keypad Controls: Power - on/off Input mode - Bluetooth or direct Play/pause - available in Bluetooth mode Track forward/repeat - available in Bluetooth mode Volume up/down - available in both Bluetooth and direct mode Uses: To add up to four loudspeakers or two popup speakers and a subwoofer to a portable spa As a stand-alone system amplifier for any audio source - ideal for small watercraft/ATV's/golf carts Specifications: Speaker Impedance: 2-8 ohm Output Power - (2 ohm load) 30 Watts RMS per Channel (70W Peak) (4 ohm load) 20 Watts RMS per Channel (50W Peak) Frequency Response: 20Hz-40kHz Low Pass Crossover: 18 - 245 Hz Operating Voltage: 13.8V DC (10V-16V) Maximum Current Draw (full power): 5-8 amps Amp Dimensions (approx. L x W x H) - 214mm x 106mm x 35mm 8.4" x 4.2" x 1.4" Installation Clearance - 250mm free space top/sides Weight - 68Kg /1.5lbs Control pad Cable Length - 610cm/240"/20' *SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK*Sold as an Individual Specifications: Waterproof Rating: Resistant Watts: 120w Box Dimensions: 3"H x 7"W x 18"L WT: 3.6 lbs UPC: 731128940939 Owner's Manual (pdf)Brochure (pdf)

Read more less

R1 900.6 6-Channel Marine AmplifierThe R1 900.6 marine-grade amplifier from Roswell is everything a boat's audio system has always wanted. Utilizing a 6-channel Class-D design that puts out 100 watts RMS per channel at 4Ω, these amps are perfect for powering an R1 8″ and R1 6.5″ marine speaker setup.  This amp features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals.Features: Ch 1-6 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 6-channel design Marine-grade durability 2 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 100W x 6 / 2Ω: 165W x 6 Bridged: 4Ω: 300W x 3 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Dimensions: Inches: 1.90 x 7.06 x 13.67 / Centimeters: 4.83 x 17.94 x 34.74 Specifications: Bridgeable: Yes Channels - Available: 6 Box Dimensions: 4"H x 11"W x 17"L WT: 8 lbs UPC: 066066236739

Read more less

R1 1000.1 Mono-Block Marine AmplifierRoswell’s R1 1000.1 amp is a mono-block stackable Class-D design that pairs perfectly with our new R1 subs. It also features a calibrated potentiometer. This amp is powerful, like super powerful. It can run (2) R1 12" subwoofers or (4) R1 10" subwoofers. Get bumpin’.Features: Space-saving stackable design The Lit logo power indicator lets you know your amp is receiving power Low-pass and subsonic filters (12 DB/OCT.)     Switchable differential RCA inputs minimize interference and induced noise Bass boost control (0-18DB @ 45HZ)     Conformal-coated PCBs Full 0-180º phase control     Nickel-plated wire terminals High-Efficiency Class-D Topology      Specifications: Continuous Power (RMS): 4Ω: 400W 2Ω: 675W 1Ω: 1000W Frequency Response: 10Hz – 400Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Subsonic Filter: 10Hz – 55Hz Dimensions: Inches: 1.90 x 7.06 x 11.125 Centimeters: 4.83 x 17.94 x 28.26 Specifications: Channels - Available: 1 Box Dimensions: 4"H x 11"W x 14"L WT: 6.9 lbs UPC: 006066231730

Read more less

MS-AM402 2 Channel Marine Amplifier - 400W Features: Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection. Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability. Class-AB Design - The 400 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat. Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life. RCA Line Out - A pass through the RCA output enables linking of multiple amplifiers for enhanced system performance. 2 Channels - Capable of powering 2 speakers, a sub (bridged) or 4 speakers in parallel. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bridgeable: Yes Channels - Available: 2 Waterproof Rating: Splashproof Watts: 400w Box Dimensions: 4"H x 11"W x 15"L WT: 6.3 lbs UPC: 753759139247 Owner's Manual (pdf)

Read more less

R1 650.4 4-Channel Marine AmplifierThe R1 650.4 marine-grade amplifier from Roswell, is everything a boat's audio system has always wanted. These stackable amplifiers utilize a 4-channel Class-D design that puts out 100 watts RMS per channel at 4Ω and is perfect for powering an R1 6.5″ marine speaker setup.Easily bridge and tune with the calibrated crossover controls. Because LEDs create lots of noise issues, this amp features differential RCA inputs for maximum noise rejection. The R1 650.4 is built with fully conformal-coated PCBs and nickel-plated marine-grade wire terminals to ensure their quality.Features: Ch 1-4 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 4-channel design Marine-grade durability 2 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 100W x 4 / 2Ω: 165W x 4  Bridged: 4Ω: 300W x 2 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Subsonic Filter: 10Hz – 55Hz Dimensions: Inches: 1.90 x 7.06 x 11.125 Centimeters: 4.83 x 17.94 x 28.26 Specifications: Bridgeable: Yes Channels - Available: 4 Box Dimensions: 4"H x 11"W x 14"L WT: 6.5 lbs UPC: 006066234731

Read more less

MS-AM504 4-Channel Marine Amplifier - 500W Features: Marine Grade Chassis - Stainless steel end caps and bottom plate provide a stunning finish with added environmental protection. Heat Sink Technology - Heat sink technology transfers heat more efficiently and offers more thermal stability for maximum component reliability. Class-AB Design - The 500 Watt 2-Ohm stable (per channel) design ensures clean and powerful amplification of the input signal,enough to rock the boat. Conformal Coated Circuitry - Provides added protection from salt air and moisture to ensure maximum product life. RCA Line Out - A pass through RCA output enables linking of multiple amplifiers for enhanced system performance. 4 Channels - Capable of powering 4 speakers, a sub and a pair of speakers or 8 speakers in parallel (2 speakers per channel in parellel @ 2 Ohms). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bridgeable: Yes Channels - Available: 4 Waterproof Rating: Splashproof Watts: 500w Box Dimensions: 4"H x 11"W x 18"L WT: 7.9 lbs UPC: 753759139254 Owner's Manual (pdf)

Read more less

Elite 500W Mono-Block Class D AmplifierBoss Audio Systems MPD500.1 Elite Series Monoblock Class D Car Amplifier - 500 High Output, 1 Ohm, Low-Level Inputs, Low Pass Crossover, MOSFET, Full Range, Hook Up To Subwoofer For Bass.Features: Monoblock Full-Range, Class D PWM MOSFET Power Supply RCA Level Inputs Low Pass Filter Subsonic Filter Bass Boost Input Sensitivity LED Illuminated End Panels Remote Subwoofer Control IP66-Rated (Dustproof/Weatherproof) Thermal, Short, and Overload Protection Circuits Specifications:Dimension Features: Overall: 7.8"x 5.12" x 1.97" (198 x 130 x 50 mm) Brochure (pdf)

Read more less

Elite 740W 5 Channel Class D AmplifierBoss Audio Systems MPD740.5 Elite Series 5 Channel Class D Car Amplifier – 740 High Output, 2 Ohm Stereo Stable, Low-Level Inputs, High/Low Pass Crossover, MOSFET, Full Range, Bridgeable, Hook Up To Subwoofer For Bass.Features: 5/4/3/2 Channel Full-Range, Class D PWM MOSFET Power Supply RCA Level Inputs HP and LP Filters Bass Boost Input Sensitivity Bridgeable LED Illuminated End Panels Remote Subwoofer Control IP66-Rated (Dustproof/Weatherproof) Thermal, Short, and Overload Protection Circuits Specifications:Dimension Features: Overall: 15.3"x 5.12" x 1.97" (388 x 130 x 50 mm) Brochure (pdf)

Read more less

Elite 380W 4 Channel Class D AmplifierBoss Audio Systems MPD380.4 4 Channel Marine Amplifier - Class D, 380 High Output, IP66 Rated, 2 Ohm Stable, Low-Level Inputs, High/Low Pass Crossover.Features: 4/3/2 Channel Full-Range, Class D PWM MOSFET Power Supply RCA Level Inputs HP & LP Filters Bass Boost Input Sensitivity Bridgeable LED Illuminated End Panels IP66-Rated (Dustproof/Weatherproof) Thermal, Short, and Overload Protection Circuits Specifications:Dimensions Features: Overall: 9.76"x 5.12" x 1.97" (248 x 130 x 50 mm) Brochure (pdf)

Read more less

R1 550.2 2-Channel Marine AmplifierRoswell’s R1 550.2 is the ideal amp to run an R1 tower speaker setup. It’s a 2-channel Class-D design that puts out 165 watts RMS per channel at 4Ω and 275 watts RMS per channel at 2Ω. It features calibrated crossover controls, differential RCA inputs for maximum noise rejection, fully conformal-coated PCBs, and nickel-plated marine-grade wire terminals.Features: Ch 1-2 calibrated crossover (FULL/HPF/LPF)     Space-saving stackable design Bridgeable 2-channel design Marine-grade durability 4 Ohm Stable at 165 watts per channel     High-Efficiency Class-D Topology 2 Ohm Stable at 275 watts per channel     Conformal-coated PCBs  The lit logo power indicator lets you know your amp is receiving power     Nickel-plated wire terminals Switchable Differential RCA inputs minimize interference and induced noise Specifications: Continuous Power (RMS): 4Ω: 165W x 2 / 2Ω: 275W x 2 Bridged: 4Ω: 550W x 1 Frequency Response: 10Hz – 25Hz Input Sensitivity: 0.2–10.0V HPF (High Pass Filter): 30Hz – 300Hz LPF (Low Pass Filter): 30Hz – 300Hz Bass EQ: 0-18dB @ 45Hz Subsonic Filter: 10Hz – 55Hz Phase Control: 0-180º Dimensions: Inches: 1.90 x 7.0625 x 11.125 Centimeters: 4.83 x 17.94 x 28.26 Specifications: Bridgeable: Yes Channels - Available: 2 Box Dimensions: 4"H x 11"W x 14"L WT: 6.2 lbs UPC: 066066232731

Read more less

JAHD240BT 2-Channel Bluetooth Amplifier - 80WThe waterproof JAHD240BT is on the forefront of technology with integrated Bluetooth technology allowing users to stream their audio content using a Bluetooth enabled device.  Now, users can take their personal music library with them on all of their adventures. All playback and volume options are controlled by the users Bluetooth enabled device.Features: Waterproof (IPX6) Red LED power indicator Epoxy potted enclosure Corrosion resistant (ASTM B117) Technical Specifications: Number of Channels - 2 Frequency Response - 20Hz - 20KHz 2 Ohm RMS Power Per Channel - 1 x 80W Signal-to-Noise Ratio - >95dB Product Dimensions: (W x H x D) - 4.13" x 2.32" x 1.47"  ∗SiriusXM Promotion - Get 3 Free Months SiriusXM Streaming Service - LINK*Sold as an IndividualWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bridgeable: No Channels - Available: 2 Waterproof Rating: Waterproof Watts: 80w Box Dimensions: 3"H x 5"W x 5"L WT: 1.5 lbs UPC: 681787019579 Owner's Manual (pdf)

Read more less

ME-6005D 5-Channel Amplifier - 600 WattsFeatures: Waterproof IP5 Pigtail wire harness and connection High-efficient full-range class D operation Selectable high-level and low-level input Signal sensing and 12V remote out short thermal and overload protection DIP switchable crossover Gain control for front and rear channel Switchable mode for 4-channel model: 2CH/4CH Specifications: Number of Channels - 5 4 Ohm RMS Power - 50W x 4 + 150 x 1 2 Ohm RMS Power - 75W x4 + 300 x 1 Frequency range: 20Hz-20KHz Dimensions (W x H x D) 11.4" x 4" x 1.75" (290mm x 102mm x  44.5mm) *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Bridgeable: Yes Channels - Available: 5 Waterproof Rating: Splashproof Watts: 600w Box Dimensions: 3"H x 7"W x 16"L WT: 5 lbs UPC: 731128941448 Owner's Manual (pdf)

Read more less