Hunting & Fishing - Rod Holders

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-534HS/XS Heavy 15°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.6 lbs UPC: 096811513419

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5005SLColor:   SilverFits:      2.375" O.D. PipeMount:  VertialJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Silver Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.9 lbs UPC: 096811500518

Read more less

Stainless Cast Steel Flush Mount Rod Holder with Cap - 30° The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 3-5/9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 12"L WT: 1.45 lbs UPC: 035514325042

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 2.375" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 2-3/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.8 lbs UPC: 768296009779

Read more less

Flush Mount Rod HolderRH-527VS Medium 0° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811502703

Read more less

Adjustable Mid Mount Rod Holder - 7/8" or 1" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 7/8" or 1" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10" Finish: Powder Coat Diameter (Inches): 7/8" Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010645

Read more less

Pontoon Square Rail Adjustable Clamp On Rod HolderAll the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices. Our clamp fits 1" to 1-1/4" square rail Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp Angle around the rail is infinitely adjustable Angle to the left or right adjusts in 15 degree increments 9" tall tube with 1-5/8" ID Includes 304 stainless mounting screws and the hex key needed to make the angle adjustment and to tighten the clamp in place.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Rail Box Dimensions: 2"H x 8"W x 13"L WT: 1.9 lbs UPC: 768296008338

Read more less

Plastic 30° Rod & Cup Holder - Drain - Round Top - WhiteFeatures: ABS Plastic with Round Top 30º Rod Angle Drain at Bottom Color: White

Read more less

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D. PipeColor:BlackPipe Size:#5Fits:2.375" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.8 lbs UPC: 096811500587

Read more less

Flush Mount Rod HolderRH-530 Large 30° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 14"L WT: 2.6 lbs UPC: 096811513006

Read more less

Single Aluminum 5° Transom Mount Rod HolderThe perfect way to add rod holders to the transom area. Designed with outboard engine wells in mind. An ideal way to add rod holders to a seating station. These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tallgimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected. Mount vertically or with some outward angle for a wider fishing spread. Tube leans 5° away from the 3" tall x 2-3/4" wide mounting base. 10" overall height. Includes white vinyl liner. Specifications: Construction: Aluminum Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 10" Mounting Style: Transom Box Dimensions: 5"H x 10"W x 13"L WT: 2.5 lbs UPC: 768296009793

Read more less

Fully Adjustable rod holder with over 9" of composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features: Unique Side or Deck Mounting Bracket Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Mount Dimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"

Read more less