Hunting & Fishing - Rod Holders

Triple Threat™ Rod Holder - Surface MountThe Triple Threat™ Rod Holder is the one-stop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!Features: The quarter turn knob allows for easy adjusting of the angle of the rod with a quick twist The rear bail facilitates vertical storage of rods while moving from one location to another Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon Specifications:Fastener: 1/4 “ FHWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Mounting Style: Surface Box Dimensions: 3"H x 10"W x 13"L WT: 1 lbs UPC: 035514326964 Brochure (pdf)

Read more less

Triple Threat™ Rod Holder - Track Mount Base with 6" ExtensionThe Triple Threat™ Rod Holder is the one-stop shop for all reel styles. Spin, bait cast, or fly reel—this rod holder can handle it all!This TRACK MOUNT Triple Threat™ Rod Holder has a 6 in. extension that can move a span of 245 degrees.Features: The quarter-turn knob allows for easy adjusting of the angle of the rod with a quick twist The rear bail facilitates vertical storage of rods while moving from one location to another Attachment points on the base give users a solid clip point for leashing a rod and reel while paddling in rough conditions Proudly constructed in the USA of injection-molded glass-filled nylon WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Nylon Box Dimensions: 3"H x 10"W x 13"L WT: 1.2 lbs UPC: 035514330053 Brochure (pdf)

Read more less

Stainless Steel Side Mount Removable Rod Holder Side Mount Rod Holder slides in and out of mounting plate for a lower profile while not in use. Constructed of formed 316 stainless steel with mounting plate. Features a 30° angle. Accommodates rods up to 1-13/16”. Installs with four #10 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 9" Mounting Style: Side Box Dimensions: 3"H x 6"W x 18"L WT: 1.5 lbs UPC: 035514325783

Read more less

536800S - Flush Mount Rod Holder - 0 Degree - Swivel - 10.5" DeepThe larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. The rod holder has no logo on the cap for a sleek low profile. Technical Specifications: Material - 316L Stainless Steel Angle - 0° Bottom Style - Swivel Liner Color - Black Inner Diameter - 1-7/8" Tube Length - 10-1/2" Cap Size (L x W) - 5-1/8" x 4-1/4" Hole Size - 2-1/2" *Sold as an Individual Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2.5 Finish: Silver Length (Inches): 10.5 Mounting Style: Surface Box Dimensions: 6"H x 6"W x 16"L WT: 3.2 lbs UPC: 768296011222

Read more less

Aluminum Vertical Clamp-On Rod Holder 1-2/3" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10 Finish: Powder Coat Diameter (Inches): 1-21/32 Construction: Powder Coated Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010638

Read more less

Aluminum Vertical Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10 Finish: Powder Coat Diameter (Inches): 1-5/16 Construction: Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010614

Read more less

Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Rail Length (Inches): 10 Finish: Powder Coat Diameter (Inches): 1-5/16 Construction: Aluminum Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010607

Read more less

Flush Mount 30° Nylon Rod Holder - White Corrosion-free nylon rod holder. These 30° light-duty fishing rod holders are an economical way to add more rod storage. Molded in one piece from UV-resistant Nylon, these rod holders are tough and corrosion-free. 10" tube. Cap is 4" long x 3-1/2" wide. Installs into a 2-1/16" hole. Mount with 3/16" screws (not included).

Read more less

Fully Adjustable rod holder with over 9" of stainless steel jacketed composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features: Heavy Duty Stainless Steel Unique Side or Deck Mounting Bracket Tilts up and down, including upright for rod storage when travelling Less missed strike opportunities Swivels 360 degrees Locks closed for travelling Includes 241 Combination Side / Deck Mount. To use the new Scotty "lock-down" mount system, simply choose the best direction to fish from and insert the rod holder or accessory, pushing the post straight down into the mount. Can be mounted on top or side of gunnel.Mount Dimensions 4" x 2" x 2"Bolting Dimensions 1 5/16" x 3 3/16"WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Aluminum Clamp-on Rod HoldersModel:  RA5001GLColor:   GoldFits:      1.050" O.D. PipeMount:  VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Anodized Aluminum Diameter (Inches): 2.14" Finish: Gold Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.75 lbs UPC: 096811500129

Read more less

3-Rod Poly Rod Rack Deluxe Durable polyethylene to withstand the harsh marine environment Flared rod holder for easy rod handling Slotted rod holders lock in most conventional & spinning outfits Deluxe racks feature convenient integrated slots for knife & pliers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Diameter (Inches): 1-3/4" Length (Inches): 18" Box Dimensions: 3"H x 12"W x 18"L WT: 1.6 lbs UPC: 045038543334

Read more less

Adjustable Mid Mount Rod Holder Aluminum 1.66" or 1-1/2" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features: Style: Adjustable Mid Mount Fits rails with 1.66" or 1-1/2" measured OD Made from Marine Grade Aluminum WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Length (Inches): 10" Finish: Polished Diameter (Inches): 1-1/2" Construction: Aluminum Mounting Style: Rail Box Dimensions: 3"H x 10"W x 13"L WT: 2.1 lbs UPC: 768296010904

Read more less