Hunting & Fishing - Rod Holders

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-527VS/XS Medium 0°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811512719

Read more less

Stainless Steel Flush Mount Rod Holder with Cap - 90° A high quality, vertical mount rod holder! These 90° Flush Mount Rod Holders are constructed of investment cast 316 stainless steel with a plastic liner, integral cap, and mounting gasket. Features a 90° angle. Accommodates rods up to 1-1/2". Installs with three #12 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 9-5/8" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 13"L WT: 1.65 lbs UPC: 035514325967

Read more less

No. 355 Rodmaster IIFibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pinFits 3/4" and 1" Scotty downrigger booms. Bolts through the boom

Read more less

No. 350 Rodmaster IIFibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pinIncludes No. 241 combination deck or side mount.Bolting dimensions: 1 5/16" x 3 3/16"

Read more less

Stainless Cast Steel Flush Mount Rod Holder with Cap - 30° The unique design of the cast stainless mounting flange allows the use of a gasket to reduce leakage that is common on other cast rod holders. This Flush Mount Rod Holder with Cap is constructed of corrosion resistant investment cast 316 stainless steel with a UV resistant PVC cap and full length PE liner. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 1-1/2" Finish: Polished Length (Inches): 3-5/9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 12"L WT: 1.45 lbs UPC: 035514325042

Read more less

Aluminum Clamp-On Rod Holder - Horizontal - 2.375" ODSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Aluminum Diameter (Inches): 2-3/8" Finish: Polished Length (Inches): 10" Mounting Style: Clamp Box Dimensions: 3"H x 10"W x 13"L WT: 1.8 lbs UPC: 768296009779

Read more less

Pontoon Square Rail Adjustable Clamp On Rod HolderAll the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices. Our clamp fits 1" to 1-1/4" square rail Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp Angle around the rail is infinitely adjustable Angle to the left or right adjusts in 15 degree increments 9" tall tube with 1-5/8" ID Includes 304 stainless mounting screws and the hex key needed to make the angle adjustment and to tighten the clamp in place.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Construction: Stainless Steel Diameter (Inches): 1-5/8" Finish: Polished Length (Inches): 9" Mounting Style: Rail Box Dimensions: 2"H x 8"W x 13"L WT: 1.9 lbs UPC: 768296008338

Read more less

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D. PipeColor:BlackPipe Size:#5Fits:2.375" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don't like the position, simply move them.These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe.All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Specifications: Construction: Powder Coated Aluminum Diameter (Inches): 2.14" Finish: Black Length (Inches): 10" Mounting Style: Rail Box Dimensions: 4"H x 9"W x 12"L WT: 1.8 lbs UPC: 096811500587

Read more less

15 Degree Large HD Swivel Rod HolderThis Rupp large rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 15-degrees Material: Stainless steel Liner: White Size: large Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.85 lbs UPC: 784703001679

Read more less

0 Degree Fixed Standard Rod HolderThis Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish.Features:Forged end cap that gives an unbreakable rod supportSpecifications: Angle: 0-degrees Material: Stainless steel Liner: White Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 13"L WT: 2.6 lbs

Read more less

0 Degree Large HD Swivel Rod HolderThis Rupp large rod holder is made of 316L stainless steel. Durable forged components give heavy-duty performance and are polished to a jewelry-like finish for the finest cockpits.Rupp swivel rod holders are the combination of a top-quality rod holder with a special compression-bearing socket that allows rods to swivel a full 360°, keeping rod tips aimed directly into the fight and placing pressure straight into the fish. The fishing line is protected from abrasion and wear due to chafing on the sides of rod guides.Features: A precision-engineered compression bearing socket gives it a performance edge Fully adjustable with Delrin bearing surfaces to provide precise control of the swivel action Specifications: Angle: 0-degrees Material: Stainless steel Liner: White Size: large Specifications: Angle: 0 Degrees Construction: Stainless Steel Box Dimensions: 6"H x 6"W x 17"L WT: 3.85 lbs UPC: 784703001686

Read more less

15 Degree Fixed Standard Rod HolderThis Rupp standard rod holder is made of 316L stainless steel and is the perfect combination of form and function. This rod holder has an exclusive forged end cap that gives unbreakable rod support while providing a finished look polished to a mirror-like finish.Features:Forged end cap that gives an unbreakable rod supportSpecifications: Angle: 15-degrees Material: Stainless steel Liner: White Specifications: Angle: 15 Degrees Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 13"L WT: 2.6 lbs UPC: 784703001716

Read more less