Hunting & Fishing - Rod Holders

RH5165Standard Angle 30° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 6-1/2" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 14"L WT: 2 lbs UPC: 096811516519

Read more less

Swivel Base Rod HoldersRH579XLHalf Angle 15° Extra Long TubeStainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 16" Mounting Style: Flush Box Dimensions: 4"H x 7"W x 17"L WT: 3.95 lbs UPC: 096811517912

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-530SS/XS Large 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 11" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 15"L WT: 2.7 lbs UPC: 096811513013

Read more less

Swivel Base Rod HolderRH577VVertical 0°Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 2-1/4" Finish: Polished Length (Inches): 12" Mounting Style: Flush Box Dimensions: 4"H x 6"W x 13"L WT: 3.2 lbs UPC: 096811517707

Read more less

Flush Mount Rod Holder Bar PinAll Stainless SteelRH-525SS/XS Medium 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years. Specifications: Angle: 30 Degrees Construction: Stainless Steel Diameter (Inches): 2" Finish: Polished Length (Inches): 9" Mounting Style: Flush Box Dimensions: 5"H x 6"W x 14"L WT: 1.9 lbs UPC: 096811512511

Read more less

Stainless SteelFlush MountSwivel Rod Holders80 Series0°10-1/2" Length1-7/8" ID Swivel base ideal for bent butt rod fishing Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish Cast 1-piece stainless steel swivel cup Super smooth turning precision-machined 1/2" pivot with fine threads WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 0 Degrees Construction: Stainless Steel Diameter (Inches): 1-7/8" Finish: Polished Length (Inches): 10-1/2" Mounting Style: Flush Box Dimensions: 6"H x 6"W x 17"L WT: 3.05 lbs UPC: 768296006020

Read more less

Stainless SteelFlush MountSwivel Rod Holders80 Series30°10-1/2" Length1-7/8" ID Swivel base ideal for bent butt rod fishing Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish Cast 1-piece stainless steel swivel cup Super smooth turning precision-machined 1/2" pivot with fine threads WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Finish: Polished Diameter (Inches): 1-7/8" Construction: Stainless Steel Angle: 30 Degrees Length (Inches): 10-1/2" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 16"L WT: 3.2 lbs UPC: 768296006044

Read more less

Stainless SteelFlush MountSwivel Rod Holders80 Series15°10-1/2" Length1-7/8" ID Swivel base ideal for bent butt rod fishing Swivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fish Cast 1-piece stainless steel swivel cup Super smooth turning precision-machined 1/2" pivot with fine threads WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 15 Degrees Construction: Stainless Steel Diameter (Inches): 1-7/8" Finish: Polished Length (Inches): 10-1/2" Mounting Style: Flush Box Dimensions: 5"H x 5"W x 16"L WT: 3 lbs UPC: 768296006037

Read more less

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place ANGLE: 15° LENGTH: 10-1/2" I.D.: 1-7/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Angle: 15 Degrees Mounting Style: Flush Box Dimensions: 5"H x 6"W x 16"L WT: 3.1 lbs UPC: 768296005566

Read more less

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8". ANGLE: 15° LENGTH: 9" I.D.: 1-5/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Mounting Style: Flush Angle: 15 Degrees Finish: Polished Box Dimensions: 5"H x 5"W x 14"L WT: 2.2 lbs UPC: 768296005221

Read more less

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place ANGLE: 30° LENGTH: 10-1/2" I.D.: 1-7/8" Specifications: Angle: 30 Degrees Mounting Style: Flush Box Dimensions: 5"H x 6"W x 16"L WT: 3.1 lbs UPC: 768296005573

Read more less

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8". ANGLE: 0° LENGTH: 9" I.D.: 1-5/8" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Diameter (Inches): 1-5/8" Length (Inches): 9" Mounting Style: Flush Angle: 0 Degrees Finish: Polished Construction: Stainless Steel Box Dimensions: 5"H x 5"W x 14"L WT: 2.1 lbs UPC: 768296005207

Read more less