4" LED Light Strip - Blue with Gasket - 12VThis is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.Features:
12VDC, 1.2W
6 EA Blue 2835 LEDs
IP67
*The "P" within the part number indicates retail packaging Specifications:
Type: Lights
Box Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbs
UPC: 786142416410
Scan-Strip Light - 8" - WhiteScan-Strip LED lighting is a quality product for marine or RV use.Features:
8 in. white light in retail packaging
Mount this scan strip light under gunwales, in storage lockers, coolers, fish boxes, and engine rooms
Use the below deck in cabin areas for general lighting or courtesy lights
*The "P" within the part number indicates retail packaging Specifications:
Type: Lights
Box Dimensions: 1"H x 4"W x 9"L WT: 0.15 lbs
UPC: 786142413464
6-Channel Digital Switch Module Shadow-NET™ Control for Single Color & 3rd Party LightingThe 6-channel digital switch module offers a convenient way to integrate any standard light with the Shadow-Caster™ MFD interface. Simply plug in the module to the Shadow-NET™ system and switch support will automatically populate on the screen.Each module provides 6 channels of support, that will handle up to 10 amps per channel with digital fault protection. There is also a manual switch input for overriding the interface.Features:
6 independent digital switches
Control other brands of lights with the Shadow-Caster™ MFD interface and phone app
Digital over current fault protection
Manual switch override
Green/red LEDs provide the status of each channel
Full integration with Shadow-NET™ interface
The blue backlight indicates the power state
Specifications:
12/24V operation
10A each channel
5/16” power lugs
IP67 Deutsch connections
Power lug protection boots
What's Included?
6 channel digital power switch
Mounting hardware 4 #8 PH x.5”
Pre-wired mating connectors
3 year standard warranty
Quick Guide (pdf)
OceanDMX RC Explore XFM Dual 915MHzThe OceanDMX RC allows you to remotely control the RGBW color or dual-color LED lighting system installed on your boat via the DMX protocol (the lighting system must be DMX compatible). The remote has 3 programmable scenes with up to 10 pre-set modes, including a pause function. You can use up to 8 different remotes to control your lights with just 1 receiver. The kit consists of the hand-held push-button remote control, provided with a waterproof pouch, and the IP68 waterproof DMX Receiver. The remote has a range of up to 20 meters* and connects with the receiver using radio frequency (RF). The OceanDMX RC has the ability to connect to 4 zones independently**, therefore you can control your transom lights independently from your port/starboard lights. The OceanDMX RC can also be used with other 3rd party DMX systems, such as deck lighting, boat signage, etc.Features:
User-friendly interface, easy and simple operation
Control up to 4 zones
Control of third-party DMX devices
3 programmable scenes
Can be controlled by a maximum of 8 different remotes
Pre-set 10 changing modes, with pause function (Colours only)
Enable to dim brightness of each R, G, B, W channel (B & W channels for dual-color version), in order to mix colors.
Box Contents:
Remote control
Waterproof pouch
DMX Receiver
Control Cable
Terminator (Not included for X-Series)
DMX Junction Box (X-Series Only)
Installation Manual
Quick Guide (pdf)
Wedge Plate for GS-850 & GS-950In case your T-top has a slight curve, keep the appearance of your Grand Slam 850 Electric VHF Antenna Mount and Grand Slam 950 Electric Anchor & Stern Light clean by mounting them perfectly straight with our plastic wedge plates.Features:
Corrects angle of GS-850 and GS-950 to perpendicular to the T-top
Fits Grand Slam 850 Electric VHF Antenna Mount and Grand Slam 950 Electric Anchor & Stern Light
No drilling
1-year limited warranty
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
Closed Cell Foam Gasket for Ember Series LightsFoam gasket used during the installation of Ember Series Lights.Sold as a single Specifications:
Type: Parts
Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs
2013-2018 RAM 1500 Bumper Mount for 40" Lightbar - Black2013-2018 Dodge RAM 1500 Bumper Mount - Urethane bumper only. Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar. Features:
Aggressive RIGID Styling
Stainless Steel Construction
Black Powder Coat Finish
Includes All Necessary Hardware
Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar
∗ Lights sold separately Brochure (pdf)