Lighting - Accessories

OceanBridge Power CableThis power cable is for OceanLED OceanBridge.How to UseConnect the end with the socket to the OceanBridge NMEA2000/Power port and link the other end to the onboard battery. Connect the +VE red wire to a +12/24V fused power source. Connect the -VE black wire to the battery (ground) supply. Specifications: Type: Cables Box Dimensions: 1"H x 6"W x 6"L WT: 0.25 lbs

Read more less

OceanBridge Switch Input CableThis cable is meant for connecting external switches to OceanLED's OceanBridge.How to UseTo connect external switches, wire the push-button switches to the OceanBridge Switch Input Cable. Then, connect the switch input cable plug to the OceanBridge switch input connector. Keep in mind that supplementary wiring will be needed to establish the connection for the 12/24V DC power to the switch installation. Specifications: Type: Cables Box Dimensions: 1"H x 4"W x 4"L WT: 0.1 lbs

Read more less

OceanConnect Junction BoxThe OceanConnect is a waterproof (IP66) DMX-controlled, low-voltage DC (9–32V) junction box.The OceanConnect provides one power unit and four individually switched fused power outputs (6 amps per output) to connect DC-powered lights or other DC-switched units. The unit also supports powering and individual addressing of up to four DMX-controlled OceanLED X-Series lights. Contents: 1x OceanConnect unit, including 4x 7.5A blade fuses 4x mounting screws 1x twin entry cable grommet 4x blanking plugs Specifications: Voltage: 12/24V DC (max 32V DC) Input/Output Cable Glands: 1x M20-Power In, 4x M16 - DMX In/Out, and Lights Out Power Input Terminals Wire Gauge: 8-20 AWG DMX In/Out, and Lights Out Terminals Wire Gauge: 12-28 AWG Light Outputs: DMX & Power- 4 x individual fused 6 Amp each max DMX Input: 1x DMX Input (to connect the DMX controller) DMX Output: 1x DMX Output (to link junction boxes in the chain) DMX Terminator: Onboard DMX terminator with an on/off switch Physical Specifications Dimensions (Including Cable Glands): 228mm x 174mm x 60mm (9" x 6.8" x 2.3") Enclosure: IP66-robust polycarbonate Weight: 270g

Read more less

8" LED Light Strip - White with Gasket - 12VThis is a multi-use 8" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.Features: 12VDC, 3W 15 EA 2835 LEDs Daylight white (4500K) IP67 Specifications:Lumens: 176*The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 9"L WT: 0.1 lbs UPC: 786142416441

Read more less

4" LED Light Strip - Blue with Gasket - 12VThis is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.Features: 12VDC, 1.2W 6 EA Blue 2835 LEDs IP67 *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 5"L WT: 0.1 lbs UPC: 786142416410

Read more less

8" LED Light Strip - Blue with Gasket - 12VThis is a multi-use 8" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.Features: 12VDC, 3W 15 EA Blue 2835 LEDs IP67 *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 9"L WT: 0.1 lbs UPC: 786142416458

Read more less

8" Scan-Strip 4 Color LED Light - RGBWThis 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.Features: Switching off for more than 4 seconds resets the color to white RGBW LEDs Colors are daylight white (4000-4500K), blue, red, green Lifespan 30,000+ Hours 12/24 Volt IP65 can be installed in engine rooms and exterior locations Ideal for under-gunwale lighting SS Mounting Screws Included Specifications: Beam Angle: 120°  Watts: 1.2 Lumens: 94 Dimensions (L X W x H) (inch): 8-7/8" x 7/8" x 1/2" *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 4"W x 10"L WT: 0.15 lbs UPC: 786142416502

Read more less

4" LED Light Strip - White with Gasket - 12VThis is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companion ways, or for step illumination.Features: 12VDC, 1.2W 6 EA 2835 LEDs Daylight white (4500K) IP67 *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 5"L WT: 0.05 lbs UPC: 786142416403

Read more less

Scan-Strip Light - 8" - WhiteScan-Strip LED lighting is a quality product for marine or RV use.Features: 8 in. white light in retail packaging Mount this scan strip light under gunwales, in storage lockers, coolers, fish boxes, and engine rooms Use the below deck in cabin areas for general lighting or courtesy lights  *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 4"W x 9"L WT: 0.15 lbs UPC: 786142413464

Read more less

Downlight - White Housing - Bimini BlueThis Shadow-Caster™ large marine LED downlight is bimini blue and is perfect for lighting overhead areas of the interior and exterior of your boat or yacht. At 3" overall diameter, its wide-angle spread of light and all-glass reveal make this the ideal light for T-Tops, cabins, towers, and more.Features: LED color is bimini blue  120-degree viewing angle High-efficiency switch mode power supply Waterproof low-profile aluminum housing All-Glass reveal provides a modern look White finish Durable glass lens 3-Year Warranty Specifications:120-degree beam angle 3-watt power draw 10-30 volts input 250mA at 12 volts, 125mA at 24 volts 6000 Kelvin cool white color temperature 3000 Kelvin warm white color temperature 3 in. (76mm) OD, 0.175 in. (4mm) mounting height 2 in. (51mm) mounting hole IP67 waterproof design 18 in. (45cm) lead wire Includes: Down light Flush mounting bracket (3) #4 X 0.5 in. (12.7mm) SS316PH screws Specifications: Type: Lights Box Dimensions: 3"H x 4"W x 4"L WT: 0.25 lbs UPC: 850024342866 Quick Guide (pdf)

Read more less

Wedge Plate for GS-800 & GS-900In case your T-top has a slight curve, keep the appearance of your Grand Slam 800 VHF Antenna Mount and Grand Slam 900 Masthead Anchor Light clean by mounting them perfectly straight with our plastic wedge plates. Features & Benefits: Corrects the angle of GS-800 and GS-900 to perpendicular to the T-top  Fits Grand Slam 800 VHF Antenna Mount and Grand Slam 900 Masthead Anchor Light No drilling Sold individually 1-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Type: Wedges Box Dimensions: 1"H x 4"W x 4"L WT: 0.25 lbs UPC: 631115091111

Read more less

Pico OHM Expansion ModuleThe Pico OHM modules make it easy to connect 4-wire RGB accessories to a standard 2-wire DC electrical system and control the color output through a Poco Digital Controller.Features: Connect RGB accessories to a standard 2-Wire DC electrical system 4 Modules in the pack RGB only (no RGBW) 12VDC ONLY (0.4A max current draw) No TTP (Timed Toggle Protocol) Lumitec Digital Controller (POCO) is required to control Pico OHM

Read more less