Lighting - Accessories

3-Position On/Off/Momentary Marine LED Lighting SwitchOn / Off / Momentary Marine LED Lighting Switch for two-color and multi-color lighting – simply toggle power to set color choice. For use with fishing boats, pontoon boats, sports boats, and yachts.Features: Power On/Off Color change Multiple fade mode changes Specifications: Off/On/Momentary LED Voltage Rating: 12V (Add 600ohm resistor between pin 7 and ground for 24V operation) LED Color: Blue x 2 Terminals: Brass or copper/silver plate 1/4” (6.3mm) quick connect Sealing IP66/68, for above-panel components of actual switch only Operating Temp. -40°C to +85°C Contact Rating: 20 amps, 4-14VDC and 15 amps, 15-28VDC Switch and actuator color: Black Note: Use with SCM-SNLC single-zone lighting controller to access full ShadowNET® lighting control functionality.

Read more less

Single Zone Lighting ControlSimply toggle power to set color and brightness and to select multiple fade modes.The Shadow-Caster® single-zone lighting controller is a low-cost, marine-grade RGBW LED controller that can be operated from a standard switch. Simply toggle power to set color and brightness. The SCM-SNLC also has a built-in Shadow-NET® interface that allows the controller to synchronize color and lighting control with other Shadow-NET® devices. This enables a convenient way to make Shadow-Caster® underwater lights match the color of interior RGBW lighting.The SCM-SNLC control also has a built-in ShadowNET® interface that allows the controller to synchronize color and lighting with other ShadowNET® devices. This provides a convenient way to make Shadow-Caster® underwater lights match the color of interior RGBW lighting.Shadow-NET® is a multi-channel communications platform created by Shadow-Caster® to allow seamless integration and control of all of your boat’s lighting.For use with fishing boats, pontoon boats, sports boats, and yachts.Features: Selectable RGB or RGBW output to support an optional white channel Color-coded connections make for easy installation Integrated Shadow-NET® interface broadcasts lighting commands to synchronize other Shadow-NET® enabled lighting products such as underwater lights and downlights This device can be added to an existing Shadow-NET® network as an additional RGBW zone Control brightness, color, and select multiple fade modes • Compatible with RGBW strips from other manufacturers Internal RGBW backlight to indicate current color and mode Exclusive power control technology to mitigate effects of electrical noise  Custom software versions available for boat builder applications Specifications: 5.2” (132mm) x 2” (51mm) x 2.75” (70mm) IP65 washdown rated enclosure 10-30 volts input range Power: Support for 250W of RGBW lighting, 20 amps  ATC fuse for protecting the output Includes: Lighting controller Mounting hardware Quick start guide Standard 2-year warranty Quick Guide (pdf)

Read more less

Tortuga Dimmer - 12/24VThe Tortuga Dimmer is designed to easily adjust the interior or exterior light level from 0-100% output. Touch the "up" button to turn the light on, and touch the "down" button to turn the light off. Press and hold either up or down on the included switch to increase or decrease the light output level to your liking. Release it at any point to maintain the current brightness.If users are leaving the boat, the Tortuga features an exit mode. Push the "down" button two times within 1.5 seconds, and the light will flash twice and turn off after 1 minute.Features: The Tortuga is pulse width modulated, so it will work with LED, incandescent, or halogen lights It is also rated for 12V or 24V Die-cast aluminum housing IP66 10-30VDC Rated for 8A  Includes switch *The "P" within the part number indicates retail packaging Quick Guide (pdf)

Read more less

NaviLED PRO Deck Mount Adapter - WhiteThe NaviLED PRO series of navigation lamps have been the preferred choice of commercial and large recreational vessels for over a decade. The Horizontal Deck Mount Adapter accessory increases the installation flexibility of the NaviLED PRO range. Now the lamps can be mounted on horizontal surfaces, expanding the mounting options and catering to customers with larger vessels.Features: Mount NaviLED PRO lamps on horizontal surfaces Fits existing product range including Port, Starboard, Stern, Masthead, Bi-color Increases physical dimensions for larger vessels Innovative design hides fastenings Space for cable gland beneath the adapter UV and impact resistant material In addition to the increased mounting configurations, large vessels often prefer a larger fitting to match proportionately with the size of the boat. This adapter increases the physical appearance of the lamp by 50%.The Horizontal Deck Mount Adapter is ideal when retrofitting old incandescent lamps that were often deck-mounted designs, and caters for both rear and bottom exit cabling.The option of either black or white matches the NaviLED Pro offerings to complement the installed appearance.*Please note: Lamp is not supplied with the Adapter Specifications: Type: Adapters Box Dimensions: 4"H x 6"W x 11"L WT: 0.5 lbs UPC: 9416325247876

Read more less

Round Zone Controller 4 Channel Remote for MZ-LC or SCM-LCControl all of your boat or recreational vehicle’s RGB lighting with Shadow-Caster®’s easy-to-use multi-zone push-button lighting controller. Our unique system provides 4 independent zones of color, brightness, multiple fades, strobe, and music sync modes. The waterproof backlit controller can be mounted conveniently at your helm for quick and easy access.

Read more less

Lightspeed Light Foul-Release Coating Covers Approximately 4 Lights Underwater LightsMore Light. Less Fuss. Keep your lights shining bright all season long. Underwater lights are just as susceptible to marine fouling as any other underwater surface which can result in reduced visible light, and efforts to remove barnacles can result in damaged lighting components. Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance. Lightspeed has been shown to save three times its retail value in maintenance costs, on top of the unquantifiable damage to marine ecosystems caused by traditional antifouling products. Features: Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance Don’t risk damage to delicate components caused by scraping away hard marine growth Lightspeed also promises worry-free 12-24 months with reduced maintenance Lightspeed protects your aesthetic features, while not interfering with the light transmittance Endorsed and tested by Lumishore to ensure there is no drop in lumen output, no shift in color nor adverse effects on the lighting system performance Technical Specifications:Coverage Rate - 1ft² (four (4) average size underwater lights)In the Box: Lightclean wipe Application brush Lightspeed Clear Coat - 15ml *Sold as an Individual

Read more less

Extension Cable for RCL-95 Searchlight - 5MACR's Extension Cable extends the wiring for the Dash Mount Point Pad™ by 16.4' (5 M).Compatible With: ACR Dash Mount Point Pad™ Controller ACR RCL-95 Searchlights *Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 6"W x 7"L WT: 0.75 lbs UPC: 791659096383

Read more less

HRMK1304 Socket Assembly #21-T for RCL-100 Series Searchlights Replacement lamp socket assembly #21-T.Compatible With:RCL-100 series of searchlights*Sold as an individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 2"H x 3"W x 5"L WT: 0.05 lbs Owner's Manual (pdf)

Read more less

LightArmor Plug-In Base - 3 Pin - Stainless Steel - RoundINTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for.A Sure FitThe new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or traileringKey Features: Threaded Locking System for a secure fit Unique cover design Stays secure while underway or trailered Low-profile prevents water from pooling on top surface WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Adapt Lens Cover 10" - BlackThese ADAPT Light Covers from RIGID are the perfect solution for style and function. With multiple color options, you can give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your ADAPT light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

3 Position Rocker Switch - RedThis three (3)  position switch features a lighted cherry rocker with a protective rubber boot and is a great addition to any RIGID lighting system. This position switch allows for ON, OFF, or Auto when in Reverse. This product requires a 1" hole to mount.∗ Sold as an Individual

Read more less

Explore E6 DMX Touch Panel Controller Kit Dual - ColorsThe DMX Touch Panel Controller lets you control the color of your underwater lights at the touch of a button. This touch sensitive intelligent control keypad enables the user to select from Red, Green, Blue, White or scroll modes.Full RGBW control through a touch-sensitive display. Programmable through the included USB cable and control software.For WiFi control, see the DMX WiFi Touch Panel Controller.Features: Touch sensitive buttons DMX Colors Control Up to 24 dynamic or static scenes Touch sensitive intelligent control keypad for ease of use 3 touch sensitive buttons (on/off mode, previous, next) 5.5-12V DC Select from Red, Green, Blue, White or scroll modes Specifications:Warranty: 3 years Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less