Lighting - Accessories

Threaded Collar Pole Light Mounting Base(2 Pin) - Plug-In Type Base5° RakeConstructionChrome Plated Brass Black Plastic Waterproof snap-on cover Pigtail LeadsFits Figs. 1343, 1348, 1451, 1470, 1622 and 1656 SeriesAll-Round Pole Lights Quick Guide (pdf)

Read more less

Wired Bridge RemotePower: 12 or 24 Volt (Hard Wired)Current draw (idle / in use):negligibleDimensions: 3.5"W x 2.25"H x .75"D (88 x 57 x 19 mm)Weight:2.12 oz (60g)Housing material: UV resistant PC/ASAButton material: Silicone (glow in the dark)Operating temp range: 5°F - 113°F (-15°C - 45°C) IP Rating: IP54WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Poco Digital Lighting Control 3.0Poco Digital Lighting Control is a low-cost, easy-to-install, and set up onboard digital lighting control system that offers full dimming and color control over all your Lumitec PLI-enabled lights at the touch of a button via any compatible MFD or connected smart device. Poco 3.0 adds enhanced wireless security, an external API for compatibility with networked third-party automation systems, and a "Triggers" feature which allows for the triggering of Poco virtual switches by external inputs - all packaged within a responsive user interface for better mobile device usability.Features: PWR: Positive 10-30 VDC POCO supply power. Line must be fused prior to connecting to POCO with 3 Amp ATC blade fuse or equivalent (Constant ON or Switched with ACC Line) GRND: Negative 10-30 VDC POCO supply power ACC: Positive 10-30 VDC, Low current enable line to turn POCO on from remote device (i.e. MFD) (Must be powered to enable Poco) 1-4 IN: Channel Input power. Line must be fused prior to connecting to POCO with 10 Amp ATC blade fuse or equivalent (14 AWG 300V 16 inch long cable) 1-4 OUT: Channel Output power to the lighting circuit. Maximum 10 Amp load per channel. The maximum total load across all channels is limited to 40 Amps. Load on the channel must be only one of the following (Lumitec PLI enabled lighting/lighting capable of dimming (through PWM) / device requiring a standard ON-OFF circuit) (14 AWG 300V 16 inch long cable) LAN: Local Area Network connection. 10/100 Base T data connection to POCO. Standard CAT-5 cable with RJ45 connector required to plug into sealed network cable adapter. (18 inch long cable with Link light) POWER: Indicator - Illuminates Green if POCO is powered on, both PWR and ACC lines must have supply voltage between 10 and 30 VDC CH1-4: Indicator - Illuminates Red if power is supplied to Channel from fuse/breaker panel: - Illuminates Green if power is supplied to Channel input and the channel is turned on inside of POCO controller; PLI enabled lights may be OFF: - Flashes Orange if PLI data is transmitted: - Illuminates Orange if the channel is dimmed through a PWM signal. STATUS: Green blinking light indicates WiFi connection status: - 0 blinks: WiFi disabled - 1 blink: WiFi-enabled but not connected to any peers - 2 blinks: WiFi is connected to one or more peers Blue blinking light indicates Bluetooth-LE connection status: - 0 blinks: Bluetooth-LE is disabled - 1 blink: Bluetooth-LE enabled but not connected - 2 blinks: Bluetooth-LE is connected Quick Guide (pdf)Owner's Manual (pdf)

Read more less

8" LED Light Strip - White with Gasket - 12VThis is a multi-use 8" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.Features: 12VDC, 3W 15 EA 2835 LEDs Daylight white (4500K) IP67 Specifications:Lumens: 176*The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 9"L WT: 0.1 lbs UPC: 786142416441

Read more less

Dash Mount Point Pad™Controller for RCL-95 Searchlight Add a surface mounted a 2nd searchlight controller with ACR's Dash Mount Point Pad™.  Surface mounted and allows you to turn the searchlight on and off, change the rotation speed between high and low, and rotate the searchlight left and right, and to raise and lower the searchlight beam. *Does not include extension cable*Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Parts Box Dimensions: 5"H x 6"W x 7"L WT: 1.35 lbs UPC: 791659096376 Owner's Manual (pdf)

Read more less

URP-102 Point Pad™ Kit for ACR Searchlights Control an ACR spotlight from any place on a vessel with fingertip control and accuracy  This controller can be surface or flush mounted.In the Box: Point Pad™ URP-102 remote  Flush and surface mount case Gaskets (surface and Flush) Splitter F-Connectors Coaxial cable - 15' *Sold as an IndividualWARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Poco™ 4 Digital Light Control ModulePoco Digital Lighting Control delivers powerful, low-cost, on-board lighting control through a compatible MFD or connected smart device in a simple, easy-to-install control module.Poco 4 is the latest iteration of the award-winning Poco system and introduces innovative features such as intelligent sound-to-light, NMEA 2000 compatibility, and CAN bus integration. When installed with Lumitec’s PLIenabled lights, even more functionality is unleashed – precise control over color selection and intensity, custom lighting scene creation with interactive sound-to-light, and the ability to add ‘virtual circuits’ on a single channel, allowing aftermarket installers to add lights and improve on-board lighting designs without adding any additional wire runs.Specifications: Power Line Instruction IP Rated 3-Year Warranty *The Poco Digital Control Module can be controlled through a compatible MFD or connected smart device (not included).

Read more less

Dimmer ControllerMaybe Black Oak's lights are too bright? This dimmer module allows users to dim the LEDs down to 25%, 50%, and 75%. With the handheld remote control, users can easily turn the light on/off and dim it to a preferred brightness. Note that the dimmer module must be wired in between the relay and light to get full range of function.Specifications: Product Dimensions (L x W x H): 5” x 1.5” x 1.25” Input/Output Voltage: 12-24V Max Output Current: 25 Amps Controller Battery: CR2025-CR2032 In the Box: Dimmer module Wireless controller Specifications: Type: Parts Box Dimensions: 2"H x 3"W x 6"L WT: 0.45 lbs UPC: 850044517329

Read more less

Lightspeed Light Foul-Release Coating Covers Approximately 4 Lights Underwater LightsMore Light. Less Fuss. Keep your lights shining bright all season long. Underwater lights are just as susceptible to marine fouling as any other underwater surface which can result in reduced visible light, and efforts to remove barnacles can result in damaged lighting components. Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance. Lightspeed has been shown to save three times its retail value in maintenance costs, on top of the unquantifiable damage to marine ecosystems caused by traditional antifouling products. Features: Lightspeed is a transparent coating that is an easy and affordable way for boat owners to reduce maintenance, protect their investment, and maintain lighting system performance Don’t risk damage to delicate components caused by scraping away hard marine growth Lightspeed also promises worry-free 12-24 months with reduced maintenance Lightspeed protects your aesthetic features, while not interfering with the light transmittance Endorsed and tested by Lumishore to ensure there is no drop in lumen output, no shift in color nor adverse effects on the lighting system performance Technical Specifications:Coverage Rate - 1ft² (four (4) average size underwater lights)In the Box: Lightclean wipe Application brush Lightspeed Clear Coat - 15ml *Sold as an Individual

Read more less

E-Series Lens Cover 6" - BlackRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

Navimount RIB Self-Adhesive Mount for Inflatable - BlackFeatures: The Navimount RIB is designed to securely attach the Navilights with Magnetic base, Navimount base or Suction base to the tube of inflatable boats. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly Includes:"3M" self-adhesive sticker working on boats made from Hypalon, Polyethylene or PVC. Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 4"W x 7"L WT: 0.4 lbs UPC: 814154018985

Read more less

Wire Harness f/4"-6" Light BarThis 11' wiring harness is designed to connect a single LED light to your 12V electrical system. It features battery terminals on one end and a Deutsch connector on the other to connect to the light. It incorporates an inline fuse holder, and a waterproof switch. This harness is compatible with the following RIGID Industries LED Lights: Dually (Single), D2 (Single), 4" E-Series, 6" E-Series, 4" SR-Series, 6" SR-Series.Features: 18 AWG Wire Deutsch Connector Inline Fuse Holder

Read more less