Lighting - Flood/Spreader Lights

SR-L Series Marine Spreader Light - White Surface Mount - White Light with White HaloThe RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle. The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lightingUse the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately)The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens. Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light Specifications: Voltage - Input Range (Volts): 9 - 36 LED: Yes Box Dimensions: 4"H x 7"W x 7"L WT: 0.8 lbs UPC: 849774008634 Brochure (pdf)

Read more less

SR-L Series Flush Mount Spreader Light - Black Housing - Blue HaloThe RIGID SR-L Series Spreader light provides an easy way to add convenient area lighting and style to any vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any vehicle. The halo backlighting is available in one of four colors: red, blue, amber, or white. Use the flying leads wiring to wire the SR-L Series Spreader light directly into your vehicle’s electrical system or purchase the RIGID wiring harness separately (Part #40300 - Sold Separately.)The SR-L Series Spreader offers the same legendary RIGID build quality as the rest of RIGID’s products, from the high-grade aluminum housing to the impact resistant polycarbonate lens. Packed with power and style, the SR-L Series makes it easier than ever to Own the Night. Features: 9-36 VDC Pressure Equalizing Valve High Impact Polycarbonate lens Dedicated Wire to Run Backlight Removable Surround for Color Matching Wiring Harness Sold Seperately #40300 Halo Backlight Available in Blue, Red, White, & Amber Surface Mount and Flush Mount Available 120 Degree Wide Beam Pattern No Exposed Hardware High Grade Aluminum Alloy Housing and Heatsink ∗ Sold as a Pair Brochure (pdf)

Read more less

Docking, Hull, Back-Up LED Lights - ChromeFeatures: Sold as a Pair Operates 12 Volt DC Systems Draws 4 Amps Each Sealed Built-in Rear Heat Sink Thermal Insulated Wires Pyrex Optical Lens LED Lamp Assembly Removable Lens Cover Water Tight Gaskets Included 7.60" x 4.15" x 3.75" Specifications: Bulb Watts: 7w LED: Yes Voltage - Input Range (Volts): 12v Box Dimensions: 5"H x 6"W x 8"L WT: 2.3 lbs UPC: 601373580023

Read more less

Flush Mount Spreader Light - BlackThe third-generation flush-mounted spreader light features five 3-watt LEDs to provide plenty of illumination. Composite trim ring snaps over housing for a finished look.  Mounts with two screws, concealed by the trim ring, on either side of the fixture. This latest version adds one more LED for a total of 5. The redesign still allows this updated model to fit in the same cut-out as the older models, to make upgrades easy.Features:   12/24 V - 12 W Polycarbonate Lens UV Resistant Hidden Mounting Screws Cool white LED color (5,500 - 6,300K) Temperature of LED: less than 158° with 77° ambient temperature Five 3 Watt Samsung 3535 LEDs 1,000 Lumens Equivalent to 120 Watt Halogen bulbs LED Lifetime: 50,000 Hours LED Beam angle: 110° 0.8 Amp draw at 12 Volt IP68 Fits the previous cutout Dimensions: 6” W x 2-1/2” H x 1-3/4” D Cutout: 4-1/2” W x 1-1/2” H

Read more less

LED Cockpit Spreader Light 1440 Lumens - BlackThese marine grade LED Cockpit Spreader Lights feature six 3W high intensity Epistar LEDs that produce 1440 lumens. The wide beam polycarbonate lens provides ample illumination for sail trim or deck work. Constructed of a powder coated die cast aluminum housing with a stamped 304 stainless steel mounting bracket. Available in black or white. Low amp draw. 1A @ 12VDC. IP68 waterproof rating. CE, RoHS compliant. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Caprera3 Spreader Light - White Dimming - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

High Intensity Outdoor Dimmable LED Spreader Light - WhiteLunasea Spreader offers 1,000 lumens of lights and focuses it from bow to stern.A spreader light that delivers. Designed for distance, engineered for quality. Using two of the brightest single point light source LED's married with a lens, Lunasea puts the light where you want it - On your boat deck! Most spreader lights cast a large quantity of light outside your boat while other spreaders focus their little intensity on small areas. If polarity is swapped on the power, the light dims down which is ideal for a beautiful night sipping on a cocktail. All this while only drawing 11 watts of power."Features: IP67 rated 3 different mounting positions 1,100 lumens of light White Specifications: Voltage - Input Range (Volts): 10-40v Bulb Watts: 11w LED: Yes Box Dimensions: 1"H x 9"W x 9"L WT: 0.76 lbs UPC: 855748005387 Quick Guide (pdf)Brochure (pdf)

Read more less

Halogen Flood Light - 55W/12V - 7"This marine grade Halogen Flood Light features a fiberglass reinforced injection molded housing for strength and UV resistance, a solid glass lens, and a corrosion resistant stamped 304 stainless steel mounting bracket. H3 style 12V 55W halogen bulb.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

D-SS PRO Flood LED Surface Mount - Pair - WhiteOne of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.Features: Family: D-SS Side Shooter | PRO Optics: Flood LED Color: White Finish Color: White Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.44lb Sold As: Pair Up to 50,000+ Hour Lifespan IP68 Compliant Impact Resistant Lens GORE® Pressure Equalizing Vent Harness & Switch Included Mounting Brackets Included Specifications: Watts: 47 Amp Draw: 3.36 LED's: 7 Raw Lumens: 5544 Lux @ 10m: 71.29 Beam Distance: 84.4 m Peak Beam Intensity: 7,129 cd Specifications: Bulb Watts: 47w LED: Yes Box Dimensions: 7"H x 7"W x 13"L WT: 4.65 lbs UPC: 849774027512 Brochure (pdf)

Read more less

Flush Mount Halogen Deck Lamp - 12V - 55W - WhiteIn addition to our highly popular conventional halogen deck lamps, we now offer a flush mount version. Ideally suited for fiberglass hardtop installations and allows for a very clean and finished installation. Free Form lens reflector technology guarantees maximum output. Lamp is completely waterproof and constructed of impact resistant UV stable plastic. Comes complete with 12V 55W halogen H3 bulb. Also suitable for 24V 70W bulbs.

Read more less

Capri3 Spreader Light - White Non-Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

35W Slimline LED Floodlight, 12/24V, Cool White, 4800 Lumens, 3' Cord - White HousingLunasea LED food light is both bright and ultra thin. Available in both 12W and 35W. Sleek design It's anywhere while offering bright soft light output with a color rendering of >80CRI. Beam angle of 110 degree great for area lighting. Includes Stainless Bracket and Hardware, Tempered Glass, Breather Valve, completely sealed without the use of gaskets. Bright meets beautiful. Specifications: Power: 35W Voltage Range: 12/24V Output: 4800 Lumen, 5700K, >80CRI Dimensions: 211 (8.3”) W x 165 (6.5”) H x 39 (1.5”) D  Specifications: Bulb Watts: 35w Voltage - Input Range (Volts): 12/24v LED: Yes Box Dimensions: 7"H x 7"W x 12"L WT: 1 lbs UPC: 850001461061 Brochure (pdf)

Read more less