Lighting - Flood/Spreader Lights

Caprera3 Spreader Light - White/Red Dimming - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

E-Series PRO 6" Flood LED - BlackThe E-Series is one of RIGID's most versatile, all-around lighting solutions, and recent enhancements in LED technology delivering up to 111% more raw lumens than ever before with the E-Series PRO. Among RIGID's most popular product lines, the E-Series PRO has recently benefited from several upgrades to improve both looks and performance. Plus, new branding and new blacked-out circuit boards give the E-Series PRO a more refined look. Available with your choice of optics, the E-Series features a host of beam options, including Spot, Flood, Driving, Hyperspot, Diffused, and new Driving/Spot and Spot/Hyperspot combinations. These and other innovations make it one of the brightest and most efficient LED light bars on the market. The E-Series was born in off-road, but its versatility makes it well suited for use with power sports, marine, general automotive and even first responder applications.2-Piece Housing - This LED Light Bar now features a 2-piece housing that is stronger, more durable and features an improved cooling system. 2-Piece housing are Torture Tested & Approved! With user serviceable mounting hardware and additional mounting bosses on the bottom and an integrated deutsch/amp plug, it makes this new 2-piece housing a more reliable sealing surface for you LED Light Bar.Features: Optics: Hybrid - Flood LED Color: Color: White Finish Color: Black Length: 6" Mount Type: Surface Shipping Dimensions: 6" × 8" × 6" Product Weight: 2.84 lb Sold As: Single Hybrid Optics 20° Flood Pattern 50,000+ Hr LED Lifespan Instant On / Off - No Warm Up RoHS Compliant Over / Under Voltage Protection Durable Polycarbonate Lens Integrated Thermal Management GORE® Pressure Equalizing Vent Designed, Engineered, & Assembled in the USA Specifications: Watts: 80 Amp Draw: 5.71 LED's: 12 Raw Lumens: 9504 Lux @ 10m: 166.16 Beam Distance: 128.9 m Peak Beam Intensity: 16,616 cd Specifications: LED: Yes Bulb Watts: 80w Box Dimensions: 7"H x 7"W x 10"L WT: 4.8 lbs UPC: 849774028885 Brochure (pdf)

Read more less

CapriLT - LED Flood Light - White Finish - White Non-DimmingSince 2008 Lumitec's Capri and Caprera family have established the benchmark for quality, performance, and value in LED flood replacements for 55W halogens. With more than 1,000 integrating sphere tested lumens, the CapriLT builds on that legacy and reaffirms market leadership.Developed, designed, and manufactured entirely in Florida, USA, the CapriLT delivers exceptional reliability and class-leading performance. As with all Lumitec products, this light has been rigorously tested for shock and vibration, water ingress, impact, weatherability, electromagnetic radiation and susceptibility, and overall durability. In short, the CapriLT delivers exceptional value in extreme environment LED flood lights.Specifications: Voltage: 10-30V DC 12V DC Amps: 1.3A 2V DC Amps: 600mA Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 12 Lumens (White): 1000 Width: 4.94" Height: 1.75" Depth: 1.75" IP67 Compliant Certified Ignition Protected WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Voltage - Input Range (Volts): 10-30v Bulb Watts: 12w LED: Yes Box Dimensions: 4"H x 6"W x 7"L WT: 0.6 lbs UPC: 089300012883

Read more less

Bracket Mount Spreader Light - White Housing - WhiteThe Shadow-Caster 4X Bracket Mount Spreader Light is perfect for illuminating decks and other large areas of your boat or yacht. The bracket mount version is great for retrofitting existing installations. The Shadow-Caster parabolic reflector design offers a 60-degree beam. It is available in a single color white. The brightness can be controlled with a standard switch or Shadow-Caster Light Commander controller and NMEA 2000 interface.Features: Soft start technology ramps the brightness up gently over 2 seconds Power toggle feature to set brightness Cool white color temperature LED for best performance High-efficiency switch mode power supply Waterproof aluminum housing Unique reflector design to reduce glare Specifications: 3000 lumens output 60-degree beam angle 20-watt power draw 10-30 volts input Current draw: 1.5 amps 6200 Kelvin cool white color temperature 4.25” (108mm) overall length X 1.6” (41mm) width X 2.8” (71mm) height IP67 waterproof design Durable glass lens Includes: Spreader light 3’ (1m) submersible grade cable SS 316 bracket Standard 3-year warranty Quick Guide (pdf)Brochure (pdf)

Read more less

Sea Hawk XL Dual Color LED Floodlights - Warm White/White LED - Black HousingProfessional sports fisherman, commercial operators, and ocean racers all recognize the ‘non-glare' night vision preservation advantages of red lighting.Two rows of bright white light is ideal when working, docking or landing the big one while the third row of secondary color adds versatility. Red is perfect for preserving your night vision, blue is popular when added bling or a point of difference is needed, while warm white creates added comfort when you want to relax or match the rest of your interior lighting.The new Sea Hawk-XL continues using the latest Hi-Tech materials. A heavy duty Grilamid® lens provides exceptional impact resistance. The unique ceramic thermal polymer housing distributes heat away from internal components and avoids potential corrosion issues associated with metal housings.Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. Sea Hawk-XL lamps are pre-wired with three core marine cable and completely sealed for reliable operation in exterior applications.Hella Marine Sea Hawk lamps offer class-leading energy efficiency, unmatched durability and are supported with a 5-year warranty for a total ‘fit and forget’ solution and complete peace of mind.Specifications: Housing Material: Thermally conductive polymer housing Lens Material: Heavy duty Grilamid lens Bracket Material: 316 Stainless Steel Operating Voltage: 9-33V DC Power Consumption: White LEDs <12W, Red <2W, Blue <4W Light Output: 750 lumens Color Temperature: 5000K (White) Degree of Protection: IP 67 - Completely Sealed Cable: Pre-wired with 2.5M of tinned marine cable Approvals: CE Specifications: Voltage - Input Range (Volts): 9-33v LED: Yes Box Dimensions: 3"H x 7"W x 9"L WT: 1.3 lbs UPC: 9416325243243

Read more less

Stainless Steel LED Docking Lights LED Docking Lights feature a sleek, contemporary design. Constructed of stamped 304 stainless for corrosion resistance. 32 super bright LEDs produce 180 lumens for excellent vision when docking. Surface mounted with two #8 RH fasteners (not included). Low amp draw of 0.28A @ 12V. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

4" Marine Spreader Light Flood Scene LED Pro Series 3.0 - BlackWith the massive popularity of our 2-inch Black Flush Mount Spreader Light, Black Oak decided to release a 4-inch Scene Spreader Light in Black as well! With the amazing 120 degree throw and 3,120 raw lumens, this light is perfect for lighting up your deck, cockpit, bow, and more. Offered in both black and white, you can now match your other accessories on your boat.Activities & Uses: Spreader light (bow/stern) Aft Deck Fishing lights    Fore Deck lights Overheard lighting (marine/non-marine use) Specifications: Dimensions: L = 5" x H= 2.15" x W = 2.13" Total Wattage: 40W Amp Draw:  2.8 A LED Quantity: 4 Weight: 0.35 lb Raw Lumens: 3,120 Warranty: Lifetime Guarantee: 30 Day Money Back IP Rating: IP69k E-Mark: E9 Includes: (1) Pro Series 3.0 - 4 Inch Spreader Light (1) Wiring pigtail with 2-pin waterproof Deutsch connector  Mounting Hardware required to install

Read more less

ML-2 LED Combination Deck/Steaming LightThis top selling light has been completely retooled to provide better access for bulb replacement. At the same time, the deck light/bulb assembly has been greatly improved with a prismatic reflector for enhanced deck illumination.Features: Steaming Light meets Coast Guard requirements for yachts up to 65' LOA Separate Switching 10 Watt Boy Light Bulb is easily replaceable (WN-211).8 amps Deck Light features identical to ML-1 Provided with 6” of triple-lead wire Weighs 7 oz – measure 5 ¾” vertically Molded body Available in black finish only Mast Light Chafe Guard will also work with Aqua Signal model 254047-7 combo light Replacement bottom ring for NL-1 & 2. Top bulb ML-2 Bottom Bulb ML-1 & 2. Top Clear Lens, ML-2 only.

Read more less

SR-Q Series PRO Spot Diffused Midnight Surface Mount - PairIt’s all about stealth with RIGID’s Midnight Diffused Lens. Available in SR-Q, SR-M and D-Series, these lights feature blacked out hardware, blacked out spot optics and the blacked out Diffused Lens. The Midnight Optics along with the smoked diffused lens enable RIGID to virtually disappear during the day while still providing powerful LED technology to light up the night. Thanks to improved LED technology, the Midnight Edition PRO now offers more light output than ever before. In the Box: Mounting Hardware Black Powdercoat, U-Shape Bracket (Excludes FM) Harness w/Switch Deutsch Connector ∗ Sold as a Pair Specifications: Voltage - Input Range (Volts): 36v Bulb Watts: 30w Box Dimensions: 7"H x 7"W x 10"L WT: 3.15 lbs UPC: 849774031045

Read more less

Capri3 Spreader Light - Spectrum - Black HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

SR-L Series Marine Spreader Light - White Flush Mount - White Light with Blue HaloThe RIGID SR-L Series Marine Spreader light provides an easy way to add convenient area lighting and style to any boat or vehicle. This spreader provides a broad 120° beam pattern to illuminate wide areas around any boat or vehicle. The SR-L Series Spreader also offers stylish halo backlighting to provide accent lighting that adds a custom look to any boat or vehicle. The halo backlighting is available in one of three colors: red, blue, or white.  Forward projecting light is great for area/deck lightingUse the flying leads wiring to wire the SR-L Series Spreader light directly into your boat or vehicle’s electrical system.  (Part #40300 - Sold Separately)The SR-L Marine Series Spreader offers marine grade polyester based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings and an impact resistant polycarbonate lens. Packed with power and style, the SR-L Marine Series makes it easier than ever to Own the Night.Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power and Accent Light modes Accent light can be used for low level ambient lighting *Sold as an Individual Light Specifications: Voltage - Input Range (Volts): 9 - 36 LED: Yes Box Dimensions: 3"H x 7"W x 7"L WT: 0.75 lbs UPC: 849774010095 Brochure (pdf)

Read more less

1" x 2" 65° - DC Scene Light - BlackRIGID Industries 1x2 65° DC Scene Light prodcues 1100 raw lumens and features a vertical spread of 69° and a horizontal spread of 65°. Using the latest LED technology, all new patent pending optic system, minimal amp draw, and extreme output, the 1x2 65° Scene Light is the perfect area lighting solution. This versatile light can be mounted to your RV, toy hauler, tractor trailer, fire truck and can even be mounted to the undercarriage of your vehicle. Limited Lifetime Warranty.Features:  65° Horizontal Spread X 69° Vertical Spread Flat Mounting Surface Available with Cool White or Amber LEDs 9-36 V DC IP68 Compliant Powder Coated Aluminum Housing Specifications:  Watts: 9 Amp Draw: 0.75 @14v LED's: 3 Raw Lumens: 1100 Lux @ 10m: 7 Beam Distance: 26.4 m Peak Beam Intensity: 6.95 cd Brochure (pdf)

Read more less