Lighting

2" Marine LED Pod Light - Flood Optics - White Housing - Pro Series 3.0The Marine Series POD was crafted to handle water and salt corrosion, offering solid aluminum construction engineered with "Marine" as Black Oak's number one priority. The all-white marine POD provides a sharp look to any boat, ATV, white truck, Jeep, or UTV. These Cree light PODs are perfect as backup lights, headlights, bed lights, and so much more. Completely submersible by up to 9 feet of water, the 2x2 M-POD is IP69K marine-rated, all backed by Black Oak's limited lifetime warranty.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Sheer PowerThis light can be turned in any direction, allowing an absurd amount of light exactly where it's needed. Upgrade to the 10w CREE light POD and blast an impressive 3100+ lumens with ONLY 4 LEDs! Features: Flood lighting pattern 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Fog light replacements  Bow light's on flats boats with trolling motor Lower A-Pillar ditch lights on UTV's and trucks Trailer lighting Front bumper lights Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.4 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80" In the Box: 2” pod light with flood optics Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual Specifications: Amps - Draw: 2.8 Bulb Type: LED Bulb Watts: 40 Waterproof: Yes Wireless: No Box Dimensions: 5"H x 6"W x 6"L WT: 2.35 lbs UPC: 850044517121

Read more less

Pro Series 3.0 2" 850nm Infrared  Pod Light - Flood Optics - Black HousingThe Infrared Small LED POD by Black Oak LED offers the perfect combination of power and size. These IR vehicle light PODs emit infrared light at 850nm and allow an extreme increase in visibility with night vision optics and cameras. This tactical LED light POD has the extreme IP69K durability to match such high-performance LEDs and allows users to have total confidence that their gear is up for any mission.*Do not stare directly into IR lights.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Technical Specifications:Dimensions with Mounting Bracket (Width x Height) - 3.2" x 3.8" In the Box: Infrared POD light Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware is ready to install! *Sold as an Individual Specifications: Amps - Draw: 1.7 Bulb Type: LED Bulb Watts: 20 Waterproof: Yes Wireless: No Box Dimensions: 5"H x 6"W x 6"L WT: 2.35 lbs UPC: 860470002238

Read more less

Pro Series 3.0 Curved Double Row 30" LED Light Bar - Combo Optics - Black HousingThis 30-inch curved LED is a painfully bright LED bar that won't break the bank. This light is perfect for mounting in a lower bumper, behind the grill, or across the top of an ATV and can throw a beam that will illuminate a whole air strip. Don't underestimate its size. This 30'' curved double-row light bar is no joke.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Premium Dupont powder-coating for the highest quality and most resistant finish Combination Flood/Spot light pattern offers a superior lighting pattern Multi-mount brackets made of 9 gauge marine grade Stainless Steel Lens cover made of Lexan with a UV protectant Activities & Uses:  Off-Road combo light T-Top boat light Behind the grill light bar UTV roof lighting Perfect between tow hooks on Ram 2500 and 3500's Technical Specifications: Total Wattage: 300W Amp. Draw: 12.7 LED Quantity: 60 Weight: 10.8 lbs. Raw Lumens: 39,600 Warranty: Lifetime IP Rating: IP69K     Connection: Deutsch connector Dimensions with Mounting Bracket (Width x Height): 31.4" x 4.125" In the Box: Light bar Complete wiring harness with fuse, relay, and switch 12 gauge wire Mounting brackets All hardware is ready to install! *Sold as an Individual Specifications: Beam Pattern: Spot-Flood Combo Housing: Black Length (Inches): 30" Box Dimensions: 6"H x 7"W x 35"L WT: 12.2 lbs UPC: 850044517718

Read more less

Ember E1150Z Snap-In - Polished Chrome - Round - Warm White LightProduct Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces Specifications: Dimming: Yes Bulb Type: LED LED Color: Warm White Voltage - Input Range (Volts): 12/24v Housing: Chrome Box Dimensions: 3"H x 3"W x 3"L WT: 0.2 lbs Brochure (pdf)

Read more less

Barbados Courtesy Accent LED Light - Black with White LightOriginally engineered for military application, our robust, high-output Barbados light is popular with marine and industrial customers alike because of its amazing performance and clean lines. Extremely durable composite housing. Smooth rounded profile to avoid snagging pant cuffs, lines, or clothing, Barbados is the ideal for lighting toe kicks on stairwells and deck steps.Specifications: Lumens (White): 45 Voltage: 10-16V DC 12V DC Amps: 45mA 24V DC Amps: N/A Rated Watts: 0.55 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to +131/55 Timed Toggled Protocol (TTP): No Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Height: 1.28" (3.25cm) Width: 1.81" (4.60cm) Depth: 0.52" (1.33cm) Diameter: N/A Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Black LED Color: White Dimming: Yes Box Dimensions: 1"H x 3"W x 5"L WT: 0.05 lbs

Read more less

NaviLED PRO Port Navigation Lamp - White Shroud - Red Lens - 3NMThis NaviLED PRO port lamp covers vessel requirements over 50m. NaviLED®PRO lamps are proven worldwide on commercial, military, and recreational vessels.Ultra-Low Current DrawThis port lamp consumes less than 3.2W combined.No bulbs, No Maintenance, Ultra Long Service LifeHella marine LED technology has no filaments to break, making NaviLED®PRO lamps extremely shock- and vibration-proof for proven reliability and safety in demanding conditions.Multivolt™ 9-33V DCAdvanced electronics ensure reliable illumination and lamp protection even under severe voltage fluctuations and low battery voltages.Fully Sealed for Life. IP 67 CertifiedEach NaviLED®PRO lamp is a completely sealed unit. High-impact housings ensure durability from waves and impacts. Ultra-heavy-duty BSH versions use high-tech Grilamid® lenses to offer superior strength in extreme conditions.Pre-wired with 2.5M of Twin-Core Marine CableHigh-quality cable assemblies for time-saving, completely sealed installations.Specifications: Lamp Type: Port navigation Lens Color: Red Housing Color: White Material Description: High impact resistant acrylic lens Minimum Visible Distance: 3 Nautical Miles (Yachts and Powerboats) Cable: Pre-wired with 2.5M of twin-core marine cable Operating Voltage: Multivolt™ 9-33V DC Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -700 volts Power Consumption: Less than 3.2W combined. Degree of Protection: IP 67 - Completely Sealed Weight: 250g (including cable) Approvals: IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ Specifications: Housing: White LED: Yes Lens Color: Red Visible Range (Miles): 3nm Voltage - Input Range (Volts): 9-33v Box Dimensions: 4"H x 4"W x 6"L WT: 1 lbs UPC: 9416325253280

Read more less

Capri3 Spreader Light - White/Red Dimming - White HousingNow with 1,200 lumens, a smaller, more thermally efficient powder-coated die-cast aluminum housing with improved optical beam pattern and available in full-color RGBW Spectrum output. But the innovation doesn’t stop there; Capri3 has no exposed fasteners thanks to our innovative easy-fit butterfly clip mounting system which greatly simplifies the installation process. Capri3/Caprera3 is IP67 compliant and PLI enabled (Poco compatible) on most models.Features: The Capri3 and Caprera3 spreader light series are smaller and lighter than the previous line of Capri/Caprera lights, yet they output 20% more light (1,200 lumens) while drawing less power, and have a more optically efficient light beam pattern for a consistent even light spread. Feature to the Capri/Caprera line is full-color RGBW Spectrum output. Capri3/Caprera3 are available with the option of full-color RGBW Spectrum, are dimmable in all colors, and PLI enabled to make them fully compatible with our Poco Digital Lighting Control System for advanced lighting control. Capri3 has no exposed fasteners due to an all-new innovative butterfly clip easy fit mounting system. This convenient mounting system uses a spring clip to firmly hold the light in place and requires no screws - giving the exterior of the light a clean flush look on your hardtop. Retro Fit Kit - Want to upgrade your current Capri lights to the Capri3? No worries, the Capri3 has a retrofit kit available that fits perfectly into the recess created by the previous line of Capri lights. This too does not require screws to secure but instead is also held in place by the same spring clip mounting system of the Capri3 lights fixture, to provide an equally seamless clean look on your hardtop. Poco Compatibility - The Capri3/Caprera3 Spreader lights are PLI compatible, meaning the internal "Power Line Instruction" technology built-in to the lights makes it compatible with our award winning Poco Digital Lighting Control system. This will allow for advanced lighting control when paired to a Poco module for precise color selection on multi-colored lights, dimming and light scene creation - all via a compatible MFD or connected smart device through the Lumitec Poco app. Specifications: COLOR OUTPUT: White, dual-color, and full-color RGBW Spectrum LUMENS: 1,200+ TRUE measured lumens VOLTAGE: 10-30vDC 12VDC: 1A 24VDC: 0.5A CCT: 5000 CRI: 70+ BEAM PATTERN: Flood

Read more less

Maxillume h120 - Flush Mount Flood Light - White Housing - White DimmingThe Maxillume h120 is poised to set a standard in DC powered deck?work lights. Delivering more than 12,000 TRUE lumens and housed in a heavy duty aluminum housing, this light is engineered to work hard. Designed to replace the ubiquitous GE "QF" series of quartz floodlights, tested to withstand vibration and shock and completely water sealed. The Maxillume h120 is the ultimate deck/work light for the roughest sea and toughest of jobs.Specifications: Lumens (White): 12,000 Voltage: 10-30V DC 12V DC Amps: 10A 24V DC Amps: 5A Rated Watts: 120 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): No Color Match Commitment (CM): Yes Mounting Hole Diameter: N/A Length: N/A Width: 9.6in (24.38cm) Depth: 3.1in (7.87cm) Diameter: N/A WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Watts: 120w Voltage - Input Range (Volts): 10-30v LED: Yes Box Dimensions: 4"H x 7"W x 11"L WT: 5.9 lbs UPC: 089300013484

Read more less

Halo Flush Mount Down Light Spectrum RGBW - Brushed HousingClass-leading output, weatherproof construction, and the simplest installation in the industry. With a shallow-depth profile (less than 1/2" mounting depth) and a secure composite mounting system, the lights are ideal for a variety of cabin and outdoor uses. Intelligent circuitry enables advanced features like dimming and multi-color control without external control modules, specialized switches, or additional wire runs. Completely water sealed and IP67 compliant.Specifications: Lumens (White): 166 Voltage: 10-30V DC 12V DC Amps: 300mA 24V DC Amps: 150mA Rated Watts: 4 CCT: 5000 CRI: 70+ Op. Temp F/C: -31/35 to + 131/55 Timed Toggled Protocol (TTP): Yes Third Party Dimmer Compatibility (3PD): Yes Color Match Commitment (CM): Yes Mounting Hole Diameter: 1-1/4" Length: N/A Width: N/A Depth: 0.70in (1.77cm) Diameter: 1.99in (5.05cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: LED: Yes Voltage - Input Range (Volts): 10-30v Dimming: Yes Housing: Brushed Box Dimensions: 3"H x 3"W x 3"L WT: 0.3 lbs UPC: 089300128072

Read more less

Stainless Steel LED Pop-Up Table LightStainless Steel LED Pop-Up Table Light is available in 2-3/4" and 5-1/2" pop-up heights. It automatically switches on with a simple twist of the cap, allowing the light to pop up, ready to use. Push the cap down, twist it to lock, and the light switches off and disappears into a table or deck. Features: Can be used with an LED Touch Dimmer Switch (403061-1) Cap and bezel constructed of corrosion-resistant investment cast 316 stainless steel Installs with #10 FH fasteners (included) Warm white light produces 500 lumens 12-24VDC IP67 waterproof rating CE certified Specifications: Bulb Type: LED Housing: Stainless Box Dimensions: 5"H x 5"W x 11"L WT: 2 lbs UPC: 035514405232

Read more less

Ember E1150Z Snap-In - Polished Chrome - Round  - Cool White LightProduct Highlights: 2.5 watts 9-30V DC input/9-15 AC Input 0 to 100% Dimming Stainless Steel Construction Asymmetric Light Distribution Wide lateral angle 6 Vibrant Color Options IP67, Exterior Rated Up to 50,000 Hours of Operation Features: Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place Fixture accomodates wall thicknesses ranging from .125" to .625" Exclusive Technology: SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture Connect the Ember to a wide range of voltages without sacrificing light output or lifetime No external drivers are required and wiring is made simple AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI) AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12/24v Housing: Chrome LED Color: Cool White Dimming: Yes Box Dimensions: 3"H x 3"W x 3"L WT: 0.2 lbs Brochure (pdf)

Read more less

Andros - Courtesy Light - Polished Stainless Steel Finish - Red Non-DimmingLumitec's Andros line of accent/courtesy lights are compact, attractive, surprisingly bright. With a housing of passivated, hand polished or powder coated 316 stainless steel, use inside or out. Choose white, red, or blue light output to illuminate counters, stairs, or companionways. Completely sealed and IP67 compliant, these lights are also suitable for cockpits, hardtops, or illuminating helm stations.Specifications: Voltage: 10 - 16V DC 12V DC Amps: 45mA 24V DC Amps: NA Correlated Color Temperature: NA Color Rendering Index: NA Rated Watts: 2 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 1.00" (2.54cm) Height: 1.00" (2.54cm) Depth: 0.50" (1.27cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Stainless LED Color: Red Dimming: No Box Dimensions: 2"H x 4"W x 4"L WT: 0.15 lbs UPC: 089300103109 Quick Guide (pdf)Owner's Manual (pdf)Brochure (pdf)

Read more less