Lighting

Ignite Surface Mount Diffused - Pair - BlackMost vehicles have very inadequate backup lighting, which can be a major safety problem. RIGID makes it easy to add compact and powerful backup lighting to any vehicle with the RIGID Ignite™ Backup Kit. The Ignite Series Accessory Lights are small but pack a lot of power with 1000 raw lumens in a light that measures just 1.4” x 1.4” x 2”. The Backup Light Kits are available with a pair of either flush mount or surface mount Ignite lights along with mounting brackets and related hardware. While a wiring harness is not included, the powerful LEDs in each light consume less than one amp each, so powering them is often as easy as tapping into the vehicle’s existing backup lighting circuit.Features:  Available in Black Only RIGID’s Smallest Forward Projecting Light Small Package, Big Output Low Minimum Voltage: 6-28 VDC IP68 Compliant Available only in Diffused RIGID Quality & Performance Easy Install Specifications:  Watts: 12 LED's: 1 Raw Lumens: 1000 Lux @ 10m: 9 Beam Distance: 59.5M Peak Beam Intensity: 884.5 cd Specifications: Bulb Watts: 12w Voltage - Input Range (Volts): 6-28v LED: Yes Box Dimensions: 2"H x 5"W x 9"L WT: 0.75 lbs UPC: 849774015007 Brochure (pdf)

Read more less

Wireless Dash Mount Remote for RCL85 & RCL95 SearchlightBlack Dash Mount Wireless Remote for RCL85 & RCL95 Searchlights. Enjoy the convenience of controlling your RCL85 or RCL95 searchlight with the Wireless Dash Mount Remote. The compact form factor and the sleek design of this remote ensure a visually appealing look when the remote is dash-mounted. It operates on the 433.92 MHz frequency and offers an impressive remote operation distance of 213' (65M).Features: Sleek design and compact form factor Impressive remote operation distance of 213' (65M) Allows for directional control and provides the ability to switch rotation/tilt speed between fast and slow The simple searchlight sync process Sync up to 4 remotes with one searchlight USCG Approved FCC CE Specifications: Dimensions: 3.98" L x 2.36" W x 0.71" H Housing Color: Black Mount Type: Dash Mount WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Low Pro™ Marine Spreader Light - Flush Mount - White Housing - White LEDThe Most Advanced Marine Spreader Light! The Low Pro™ Spreader is crafted for maximum functionality and ease of use, giving you complete control over your lighting with three built-in settings. Operated through any standard or digital switch, you can toggle between 100% brightness, 50% brightness, or halo-only without needing separate dimmers or specialty switches. These integrated features make achieving the perfect lighting for any situation effortless.The Low Pro™ Spreader Light enhances your boat's style with its sleek and bold design, offering functionality and sophistication. The integrated halo ring lighting adds a clean, modern touch, making it a standout feature for any marine vessel. More than just an aesthetic upgrade, the halo accent light is practical too—providing subtle, ambient lighting that’s perfect for nighttime docking, fishing, or creating a refined atmosphere. Whether you're looking for the best customizable marine lighting or a way to elevate your boat's appearance, the Low Pro™ Spreader delivers on all fronts.Select the Setting You WantEasily customize your lighting with a simple toggle of the switch. The first toggle activates the spreader at 100% brightness for full illumination. The second toggle on/off reduces it by 50% for a softer glow, and the third toggle on/off powers only the halo ring for a stylish accent or subtle nighttime visibility. Not Just for LooksThe halo feature is more than just a bold accent for your boat - it's also a practical lighting solution. Power up the halo at night to softly illuminate the deck without compromising your night vision. Ready to light up your whole boat?Built to LastEngineered to endure the harshest environments, these lights are designed to meet IP69K standards - the highest level of protection against water, dust, salt, condensation, and extreme temperatures. Whether facing salt spray, blazing sun, snow, or high-pressure water, they deliver reliable performance every time. Built for durability and backed by our lifetime warranty, trust you're investing in quality that lasts as long as your adventures! Brightest Spreader on the MarketThe Low Pro™ Spreader delivers unparalleled brightness for its size, making it the brightest marine spreader available, ideal for professional and recreational boaters. With an impressive 2,000 lumens and a wide 120-degree beam pattern, it ensures maximum visibility for every task.Features: Customizable Light Settings: Easily toggle between 100%, 50%, or Halo-only modes to suit your needs. Accent Halo Options: Available in white, blue, red, or amber to match your style or function.  High-Performance Brightness: Produces 2,000 lumens for superior illumination.  Wide Coverage: Features a 120° beam spread to light up large areas with ease.  Marine-Grade Durability: Built with IP69K waterproof housing to withstand harsh marine environments. Easy Integration: Connect seamlessly to your digital or physical switch for hassle-free control.  Versatile Power Compatibility: Operates on a wide range of 9-36V DC inputs.  High-Grade Polycarbonate Bezel: Designed to easily snap on, the bezel conceals all mounting hardware for a clean, seamless finish. Unlike a powder-coated finish, it resists fading and flaking over time, even in the toughest saltwater environments. Plug-and-Play: Engineered with a footprint similar to most standard spreader lights, allowing for easy easy installation without the need for custom modifications. What's in the Box? Flush-Mount Low Pro™ Spreader Light 3/16 Stainless Steel Mounting Screws

Read more less

3.0 2" 850nm Infrared Marine Pod Light - Flood Optics - White HousingBlack Oak's Marine Series has now collided with Black Oak's Infrared LEDs! The 850nm infrared comes in a flood pattern and pairs great with Night Vision Goggles and Cameras. Offered with an IP69K rating, users can take these bad boys with them offshore with them or even throw them on a vehicle.*Do not stare directly into IR lights.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features:  3W infrared LEDs 1.35A per light High-throw spot or wide flood optics IP69K rated - highest rating available Extremely durable aluminum housing Technical Specifications: Nanometers: 850 Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.8"  In the Box: Infrared POD light Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware is ready to install *Sold as an Individual Specifications: Amps - Draw: 1.7 Bulb Type: LED Bulb Watts: 20 Waterproof: Yes Wireless: No Box Dimensions: 5"H x 6"W x 6"L WT: 2.35 lbs UPC: 850044517152

Read more less

X-Series X8 - Colors LEDsThe X8 packs a mighty 2,300 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60x circular beam from each LED providing great water penetration, illuminating a large area.Choose either a single color version from either Midnight Blue or Ultra White or pick our Colors option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.Features:2,900 Lumens / 2,300 Fixture Lumens:Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.60° Beam AngleA wide-angled, focused beam lights up a large area of the water.Compact and simple designMade from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.Easy to CleanThanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.Fish-Strobe ModeExceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.Mounting Recommendations Boat size: up to 50' (15M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 50W Xenon Fixture Lumens* (total light output from a finished fixture): 2,300 Lumens: 2,900 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 1.65A @ 12V DC - 0.75A @ 24V DC Approx. light penetration (avg. water quality): 26' (8M) Approx. Light penetration (perfect water quality): 72' (21+M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 8.62" (219mm) x 3.07" (78mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.34kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 8 Certification: EMC Approved CE Approved: Yes Specifications:Warranty: 2 years Specifications: Mounting Style: Surface Color: Full Color RGBW Material: Polymer Box Dimensions: 3"H x 5"W x 11"L WT: 1 lbs UPC: 5051803007265 Quick Guide (pdf)Brochure (pdf)

Read more less

X-Series X16 - Midnight Blue LEDsThe OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends.The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area.Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless.Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish.The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world.Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating.Features:5,800 Lumens / 4,500 Fixture Lumens:Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd.60° Beam AngleA wide-angled, focused beam lights up a large area of the water.Compact and simple designMade from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required.Easy to CleanThanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it.Fish-Strobe ModeExceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait.Mounting Recommendations Boat size: up to 65' (20M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 150 Metal Halide Fixture Lumens* (total light output from a finished fixture): 4,500 Lumens: 5,800 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC Approx. light penetration (avg. water quality): 40' (12M) Approx. Light penetration (perfect water quality): 100' (30M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 9.84" (250mm) x 4.29" (109mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.50kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 16 Certification: EMC Approved CE Approved: Yes Specifications:Warranty: 2 years Specifications: Mounting Style: Surface Color: Blue Material: Polymer Box Dimensions: 3"H x 5"W x 11"L WT: 1.2 lbs UPC: 5051803007289 Quick Guide (pdf)Brochure (pdf)

Read more less

SR-L Series Marine 20" White LED Lightbar - White Light with White HaloAccent lighting is an easy way to customize the look of any boat or vehicle, and RIGID now offers a way to add style and function with the SR-L Series Light Bar. This 20-inch Light Bar offers users the latest LED technology paired with advanced optics to provide an ultra-wide 70-degree beam pattern suitable for lighting up the trail ahead.The halo provides a stylish accent color to any custom vehicle build, while the hidden mounting hardware and glossy outer trim further add to the light bar’s sleek look.  The halo backlighting is available in one of three colors: red, blue, or white.  Forward-projecting light is great for area/deck lightingA 3-position switch is included, allowing the user to easily switch between the halo accent lighting and the forward-projecting light. The SR-L Marine Series Lightbar offers marine-grade polyester-based powder coat with alodine pre-treat 316 stainless steel, mount hardware & brackets with plastic isolation bushings, and an impact-resistant polycarbonate lens. Packed with power and style, the SR-L Marine Series Lightbar makes it easier than ever to Own the Night.Specifications: 2-Wire Input with Switch Logic to toggle between modes High Power, Low Power, and Accent Light modes Wide beam with a firm cutoff on the lower edge for minimum reflection Accent light can be used for low-level ambient lighting Specifications: Length (Inches): 20" Voltage - Input Range (Volts): 12v Housing: White Beam Pattern: Flood Box Dimensions: 7"H x 7"W x 24"L WT: 5.15 lbs UPC: 849774007439 Brochure (pdf)

Read more less

LED Dome Light - Traditional - Stainless Steel - 5.5" - 12VTraditional surface mount stainless steel dome light.  Side mounted on/off switch. Features 20 each SMD 2835 warm white (4000k) LEDs.Features: Prismatic plastic lens 229 Lumens 12V - 1.7W 150° Beam Angle Output compares with a 20 Watt Halogen bulb

Read more less

NaviLED PRO Stern Lamp - 2nm - White ShroudThis stern lamp covers vessel requirements up to 50 m.Hella Marine takes navigation lighting very seriously. Often a grudge fitment to comply with the rules, these lights are critical when navigating at night.All Hella marine products are designed with components that suppress possible interference, both emissions and susceptibility to emissions, to the limits prescribed in international standards. This prevents interference with radio, communication, navigation, and other electrical equipment on board.Hella marine lamps are rated at IP67 and completely sealed. UV from the sun, corrosive salt air, and constant vibration. This lamp is impervious to the marine environment.With ultra-low power consumption from the highly efficient LED light source, this lamp provides exacting light intensity across a wide range of voltage inputs, from 9V DC to 32V DC.Made in New Zealand and fully supported by Hella Marine's 5-year warranty for peace of mind.Features: 2 NM Visibility IMO COL REG 72 USCG ABYC C-5 Compliant Maritime NZ LED 12/24V Multivolt IP67 Completely Sealed UV Resistant 5-Year Warranty Specifications: Material Description: High-impact and UV-resistant acrylic Minimum Visible Distance: 2 nautical miles (yachts and powerboats) Cable: 2.5 meters of tinned marine cable Operating Voltage: Multivolt™ 9–33V DC for 12 / 24V DC applications Voltage Protection: Spike protected to +500 volts (reverse polarity protected to -500 volts) Power Consumption: <2W (0.17A@12V / 0.09A@ 24V DC) Degree of Protection: IP 67 - Completely Sealed Weight: 250g (including cable) Compliance: IMO Col Reg 72, USCG, ABYC C-5, RCM, Maritime NZ Specifications: Housing: White LED: Yes Lens Color: Clear Visible Range (Miles): 2 NM Voltage - Input Range (Volts): 12/24V Box Dimensions: 4"H x 4"W x 6"L WT: 0.74 lbs UPC: 9416325253402

Read more less

NaviLED PRO Starboard Navigation Lamp - White - 3NMThis NaviLED Starboard lamp covers vessel requirements over 50m.Hella Marine takes navigation lighting very seriously. Often a grudge fitment to comply with the rules, this light is essential when navigating at night.All Hella marine products are designed with components that suppress possible interference, both emissions and susceptibility to emissions, to the limits prescribed in international standards. This prevents interference with radio, communication, navigation, and other electrical equipment on board.Hella marine lamps are rated IP67 and completely sealed. UV from the sun, corrosive salt air, and constant vibration: these lamps are impervious to the marine environment.With ultra-low power consumption from the highly efficient LED light source, this lamp also provides exacting light intensity across a wide range of voltage inputs, from 9V DC to 32V DC.Made in New Zealand and fully supported by Hella Marine's 5-year warranty for peace of mind.Specifications: Lamp Type: Starboard Navigation Dimensions (W x H): 3.43 x 3.54 inches (87mm x 90mm) Lamp Color: White Material Description: Hi-impact-resistant acrylic lens Minimum Visible Distance: 3 nautical miles (powerboats only) Cable: Pre-wired with 2.5m of tinned marine cable Operating Voltage: Multivolt 9-33V DC for 12/24V applications Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -500 volts  Power Consumption: <2W (0.17A@12V / 0.09A@ 24V DC) Degree of Protection: IP67 (completely sealed) Weight: 250g (including cable) Approvals: IMO Col Reg 72, RINA, USCG, ABYC C-5, RCM, Maritime NZ Specifications: Housing: White Lens Color: Green Visible Range (Miles): 3nm Voltage - Input Range (Volts): 9-33v Box Dimensions: 4"H x 4"W x 6"L WT: 0.8 lbs UPC: 9416325253365 Owner's Manual (pdf)

Read more less

A3C Downlight Kit - Cool White with Stainless Steel, White, & Black Trim RingsScandvik’s A3C LED Down Lights add the convenience of spring-loaded butterfly installation clips and are offered as single or dual-color lights that can be dimmed when paired with the Tortuga PWM dimmer. A3C features a snap-over bezel in Polished 316SS, white, or Black polycarbonate.Features: Cool white (includes stainless steel, white, and black trim rings) 12 Volt - 2.8 Watt 12 pieces LEDs 300 Lumens IP67 Applications: It is a good choice for general lighting in the headliner or as under-cabinet lighting for any size vessel Other applications include hard tops, arches, walkways, overhangs, and shower stalls *The "P" within the part number indicates retail packaging Specifications: Bulb Watts: 2.8 LED Color: Cool White LED: Yes Box Dimensions: 2"H x 5"W x 8"L WT: 0.2 lbs UPC: 786142412917

Read more less

EuroLED 130 Touch - White/Red - Black ShroudAdvanced LED lamps with touch-sensitive switching. Power saving and ultra-durable. Designed and manufactured in New Zealand, EuroLEDTouch lamps provide red/white light using the latest completely sealed touch-sensitive technology.Lighting control is beautifully simple. Touch the color pad for red or blue light, the white pad for white light. On the dual-color versions, hold your finger on the pad for more than two seconds and the lamp will cycle through four dimming levels. Release your finger on the light level required.Dual-color EuroLED Touch lamps can also be remotely operated from multiple points with ‘off the shelf’ ON/OFF/ON momentary switches. Holding one of the external switches for two seconds will synchronize the lamps to the same dimming level. Light levels are ‘remembered’ by the lamp's circuitry, even when a vessel’s batteries are turned off. The lamp will always turn on at the color intensity previously set, regardless of power interruption.EuroLED Touch current draw is 4W on white (0.33A @ 12V) and less than 1.5W on red or blue (less than 0.125A @ 12V) to provide significant power savings. Glare diffusion without light loss is important with any LED lamp to maintain efficiency and safety, particularly with powerful lamps such as the EuroLED series. Without the protection of advanced optics, significant eye strain can result from periods of looking directly into a powerful LED point source. Advanced Hella marine lens technology provides a safe, smooth, and uniform light pattern, without glare or discomfort.The durability of EuroLED Touch lamps is outstanding. Each lamp is completely waterproof, impact, and shock-resistant, for ultra-long service life. MultivoltTM circuitry provides consistent illumination across a range of input voltages from 9-33 DC, even under severe voltage fluctuations.Features: All HELLA Marine LED Lamps feature advanced materials and state of the art technology for reliability, efficiency, and safety at sea Completely sealed housing and cable entry with robust bush mount Mounting bosses eliminate torque load on housing while heavy-duty shroud clips over lamp body Dual-color EuroLED Touch lamps feature dimming and remote momentary switch control Touch the color pad for on or off, hold finger on the pad to cycle through dimming levels LED 12/24V Multivolt IP67 Completely Sealed UV Resistant 5-Year Warranty Black Shroud White/Red Specifications: Bulb Type: LED Housing: Black LED Color: White/Red Voltage - Input Range (Volts): 12/24v Box Dimensions: 4"H x 7"W x 9"L WT: 0.95 lbs UPC: 9416325170723

Read more less