Pro Series 3.0 Single Row 50" LED Light Bar - Combo Optics - White HousingBlack Oak's 50'' Marine Single Row Series LED Light Bar is the highest performing light in its line! This slim, white, powder-coated 5-watt combo light bar throws a beam over 2000 meters, ensuring users will see any dangers ahead way before it's too late. It also provides a ridiculously wide flood pattern to help see obstacles off to the sides.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features:
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Combination Flood/Spot light pattern offers a superior lighting pattern
Multi-mount brackets made of 9 gauge marine grade stainless steel
Activities & Uses:
Mount to the top of a center console without blocking or interfering with a radar
Ideal trail or dunes light for UTV and ATV enthusiasts
See buoys, traps, or channel markers with ease
Perfect as a bumper or grill mount on any white truck, SUV, or Jeep
Light up the water on a Jon boat, pontoon, or duck boat
Technical Specifications:
Total Wattage: 250W
Amp. Draw: 20.4
LED Quantity: 50
Weight: 13.6 lbs.
Raw Lumens: 33,000
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 52" x 2.6"
In the Box:
Light bar
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware is ready to install!
*Sold as an Individual Specifications:
Beam Pattern: Spot-Flood Combo
Housing: White
Length (Inches): 50"
Voltage - Input Range (Volts): 12v
Box Dimensions: 6"H x 6"W x 54"L WT: 13.2 lbs
UPC: 850044517282
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - Stainless Steel Bezel - 12VAttractive, energy efficient lighting for interior and exterior use.Hella Marine round LED courtesy lamps can be installed almost anywhere on board.Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure. Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer. Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
Specifications:
Bulb Type: LED
Voltage - Input Range (Volts): 12v
Housing: Stainless
LED Color: White
Dimming: No
Box Dimensions: 2"H x 4"W x 8"L WT: 0.23 lbs
UPC: 9416325177616
Replacement Sealed Beam for 135SL SearchlightFeatures:
50 Watt light
3-1/2" x 6" bulb
For 135SL Searchlight
WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
NaviLED 360 Compact All Round Lamp - 2nm - 8" Fixed Mount - WhiteCompact LED anchor lamps featuring advanced materials and electronic protection for ‘fit and forget’ reliability. With less than 1W consumption, NaviLED®360 lamps save power on board.Using only high performance materials the NaviLED 360 Compact series is long term durable in demanding marine environments.A power consumption of less than 1W power offers exceptional power efficiency for a 2 NM all round anchor lamp.Each lamp is completely sealed (IP67) and manufactured using Swiss Made Grilamid with unsurpassed properties. Long term stability against UV degradation coupled with high impact and chemical resistant meaning these lamps will not yellow, become embrittled or corrode.Internationally approved the NaviLED 360 series meets the requirements of COLREG, USCG, ABYC-16, RCD and WHEELMARK. Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC.Hella marine LED navigation lamps are expertly designed and precision manufactured in New Zealand and backed a 5-year warranty for complete peace of mind.Specifications:
Material Description: UV resistant, enhanced impact acrylic lens.
Minimum Visible Distance: 2 Nautical Miles (Yachts and Powerboats)
Cable: Pre-wired with twin core marine cable
Operating Voltage: Multivolt 9-33V DC
Voltage Protection: Spike protected to +500 volts. Reverse polarity protected to -500 volts
Power Consumption: < 1.0W
Degree of Protection: IP 67 - Completely Sealed
Approvals: IMO Col Reg 72, Wheelmark, USCG, ABYC A-16, RCD, Maritime NZ
Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: White
Voltage - Input Range (Volts): 9-33v
LED: Yes
Box Dimensions: 3"H x 5"W x 15"L WT: 0.4 lbs
UPC: 9416325242727
Slim Line LED 'Enhanced Brightness' Round Courtesy Lamp - White LED - White Plastic Bezel - 12VAttractive, energy efficient lighting for interior and exterior use.Hella Marine round LED courtesy lamps can be installed almost anywhere on board.Over 3 x brighter than regular Soft Light White and Warm White LED courtesy lamps.Advanced lens technology provides a cool and even spread of soft light without glare or eye strain. Hella Marine LED courtesy lamps consume a fraction of the energy of traditional bulb lamps and run very cool due to their low current draw of less than 0.5W (less than 0.04A @ 12V). This provides safer installation into light weight materials where the heat of incandescent lamps may cause damage to the surrounding structure. Each lamp is completely sealed, highly shock, impact and vibration resistant, perfectly suited for the demanding marine environment.Enhanced brightness lamps include a surface mounting ring with 3 x stainless steel screws. Stainless steel and white rim lamps include a white spacer, black rim lamps a black spacer. Specifications:
Lens Material: UV resistant enhanced impact acrylic
Rim Material: UV resistant plastic. 316 stainless steel
Dimming: Dimmed via Hella Marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 120mm of single core marine cable
Operating Voltage: 12V DC or 24V DC
Power Consumption: < 0.5W ( < 0.042A @ 12V / < 0.02A @ 24V )
Degree of Protection: IP 67 - Completely Sealed
Mounting: Stainless steel screws included
Weight: 50g (including cable)
Specifications:
Bulb Type: LED
Voltage - Input Range (Volts): 12v
Housing: White
LED Color: White
Dimming: No
Box Dimensions: 2"H x 4"W x 8"L WT: 0.22 lbs
UPC: 9416325177807
4" Marine Spreader Light Flood Scene LED Pro Series 3.0 - BlackWith the massive popularity of our 2-inch Black Flush Mount Spreader Light, Black Oak decided to release a 4-inch Scene Spreader Light in Black as well! With the amazing 120 degree throw and 3,120 raw lumens, this light is perfect for lighting up your deck, cockpit, bow, and more. Offered in both black and white, you can now match your other accessories on your boat.Activities & Uses:
Spreader light (bow/stern)
Aft Deck Fishing lights
Fore Deck lights
Overheard lighting (marine/non-marine use)
Specifications:
Dimensions: L = 5" x H= 2.15" x W = 2.13"
Total Wattage: 40W
Amp Draw: 2.8 A
LED Quantity: 4
Weight: 0.35 lb
Raw Lumens: 3,120
Warranty: Lifetime
Guarantee: 30 Day Money Back
IP Rating: IP69k
E-Mark: E9
Includes:
(1) Pro Series 3.0 - 4 Inch Spreader Light
(1) Wiring pigtail with 2-pin waterproof Deutsch connector
Mounting Hardware required to install
2" Amber LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0The amber LED fog light POD by Black Oak LED offers enough power to fill any need users might possibly have. Using True Amber 3w LEDS, this Amber POD is the highest performer in its class. The POD delivers extreme IP69K durability to match such high performing LEDs allowing users to have confidence that these 2 inch fog lights are going to perform when needed. These PODs come in the Food Optic, which throws light in a 45° pattern and is perfect for Fog Light applications.Cree and Osram are the biggest names on the LED market for a reason. They put out more light and more power at such an extreme level. Users won't believe that so much light came from an LED so tiny. This light mounts virtually anywhere, and with all the hardware needed in the box, this 2-inch fog light is ready to go.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features:
Flood lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Cut through fog and rain
Lower A-Pillar ditch lights on UTV's and trucks
Plow through snow with ease of vision
Race through dunes with better visibility
Front bumper lights
Technical Specifications:
Total Wattage: 12W
Amp. Draw: 1.1
LED Quantity: 4
Weight: 1.4 lbs.
Raw Lumens: 1,244
Warranty: Lifetime
IP Rating: IP69K
Dimensions with Mounting Bracket (Width x Height): 3.20" x 3.80"
In the Box:
2” amber pod light with flood optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual Specifications:
Amps - Draw: 1.1
Bulb Type: LED
Bulb Watts: 12
Waterproof: Yes
Wireless: No
Box Dimensions: 5"H x 6"W x 6"L WT: 2.35 lbs
UPC: 850044517084
2" Flush Mount LED Pod Light - Flood Optics - Black Housing - Pro Series 3.0Extremely versatile, this flush mount LED POD provides powerful light in a very compact size, allowing users to utilize it in countless scenarios. This Cree LED flush mount is great for ATVs, RZRs, Jeeps, trucks, work lights, and anything users can mount this powerful 2x2 LED light on. Black Oak's lab has tested and tested to ensure their LEDs are of the highest quality available. IP69K durability is a standard issue for everyone one of these guys, giving users hassle-free durability and protecting against over 30 types of harsh conditions. The flush mount LED truck lights put out an unimaginable amount of light, considering this series of lights has a compact appearance.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features:
Flood lighting pattern
360° Ceramic Protection against UV, Salt Water & Corrosion
2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar
Heavy-duty Dynamax housing for a 4x stronger frame
Activities & Uses:
Front bumper lighting for trucks and Jeeps
Reverse lights
Work lights
Headache rack lights
Technical Specifications:
Total Wattage: 40W
Amp. Draw: 2.8
LED Quantity: 4
Weight: 1.6 lbs.
Raw Lumens: 3,120
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height): 4-7/8" x 3-5/8"
In the Box:
2” flush mount pod light with flood optics
Complete wiring harness with fuse, relay, and switch
Mounting brackets
All hardware, ready to install!
*Sold as an Individual Specifications:
Bulb Watts: 40
Box Dimensions: 5"H x 6"W x 6"L WT: 2.35 lbs
UPC: 850044517107
3 LED Surface Mount Step Light - White with Black CaseFeatures:
Operates 9-16 Volt DC Systems
24 Volt Version Available
Rated @ 100,000 Hours of Service Life
Shock and Vibration Proof
Cool to the Touch
Energy Draw 26 Milliamps
No Corrosion
Potted to Seal Out Moisture
3 LEDs
1.69" x .65" x .40"
Specifications:
Bulb Type: LED
Voltage - Input Range (Volts): 12v
Housing: Black
LED Color: White
Dimming: No
Box Dimensions: 1"H x 4"W x 6"L WT: 0.1 lbs
UPC: 601373135070
Surface Strip Light w/Switch - White/Red LEDs - 12VThe Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications.Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination.The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance.Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications.These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications.Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.Specifications:
Lens Material: UV resistant enhanced impact acrylic
Color Temperature: 5000K (White) 2700K (Warm White)
Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V )
Operating Voltage: 12V DC or 24V DC
Dimming: Hella marine Dimmer 5XA 998 572-001
Cable: Pre-wired with 500mm of twin core cable
Degree of Protection: Completely Sealed IP 67
Installation: Surface Mount
Weight: 75g (including cable)
Approvals: CE
Specifications:
Bulb Type: LED
Voltage - Input Range (Volts): 12v
Housing: White
LED Color: White/Red
Dimming: No
Box Dimensions: 1"H x 4"W x 13"L WT: 0.3 lbs
UPC: 9416325240754
Brochure (pdf)
Stern Light - 2NM - Silver Housing with FB BaseThis white stern light has a silver housing, is horizontally mounted, and has a two-nautical-mile range. The FB base centers the wiring for antenna-type pole mountings. The base provides a screw-down onto the deck solution as well as a from-below mounting. Essentially, the base provides a sleeker, reduced profile. Features:
Silver anodized aluminum housing
2.5m cable is included
Specifications:
Approved To: COLREG72,EN14744,IEC 60945,IACS E10,USCG,ABS,M.E.D.,DNV,LR
Mounting: Horizontal
EAN: 5704438043602
Min. Feed Wire Gauge: 0.5mm2 AWG22
Light Color: White
Visibility: 2NM
Included In the Package: 1 Navigation light, pre-cabled with 2.5 meters shielded marine grade cable and installation guide
Materials: Silver anodized aluminum 25µ, PMMA lens, A4 stainless steel screws, Epoxy, Polyurethane
IP rating: IP68
Connection: 2.5m cable
Current Consumption (mA @ 24VDC): 50
Current Consumption (mA @ 12VDC): 110
Dimensions Metric: Ø92.5mm x 36mm
Dimensions Imperial: Ø3.6" x 1.4"
Operating Temperature: -25 degrees C to 55 degrees C
Operating Voltage: 10-32VDC
Power Draw (W): 1.3
Vessel Size: Under 12 meters, 12-20 meters, and 20-50 meters
Specifications:
Housing: Silver
Visible Range (Miles): 2NM
Voltage - Input Range (Volts): 10 - 32
Box Dimensions: 4"H x 4"W x 4"L WT: 1.4 lbs
UPC: 879343043735
Quick Guide (pdf)
Oak Rock Accent Light - Red LEDs - White HousingLight up a console, compartments, under-gunnels, and much more with Black Oak's IP69K rated marine accent lights! This small yet powerful light has LEDs that are sure to provide users with the lighting needed while on the water. Features:
Red LEDs
Activities & Uses:
Accent lighting
Compartment lighting
Map lighting
Trailer lighting
Console lighting
Under-gunnel lighting
Technical Specifications:
Total Wattage: 9W
Amp. Draw: 0.35
LED Quantity: 3
Weight: 0.35 lbs.
Raw Lumens: 220
Warranty: Lifetime
IP Rating: IP69K
Dimensions (Length x Height x Width): 2-3/4" x 1-1/2" x 3/8”
Hole to Hole Distance: 2"
In the Box:
(1) Accent light with positive and negative lead
(1) Rubber mounting pad
(1) Stainless steel screw kit
*Sold as an Individual Specifications:
Bulb Type: LED
Dimming: Yes
Housing: White
LED Color: Red
Voltage - Input Range (Volts): 12v
Box Dimensions: 2"H x 4"W x 4"L WT: 0.35 lbs
UPC: 850044517251