Lighting

8" LED Light Strip - Blue with Gasket - 12VThis is a multi-use 8" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.Features: 12VDC, 3W 15 EA Blue 2835 LEDs IP67 *The "P" within the part number indicates retail packaging Specifications: Type: Lights Box Dimensions: 1"H x 2"W x 9"L WT: 0.1 lbs UPC: 786142416458

Read more less

All Around LED Festoon - Nickel Plated BrassAll Around LED Festoon is for interior installations only. Constructed of nickel-plated brass.Specifications: Volts: 12.8V Amps: 30 mA Watts: 0.4W Light Color: White LEDs: 4 Specifications: Voltage - Input Range (Volts): 12 Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs UPC: 035514442190

Read more less

Flush Mount Spreader Light - BlackThe third-generation flush-mounted spreader light features five 3-watt LEDs to provide plenty of illumination. Composite trim ring snaps over housing for a finished look.  Mounts with two screws, concealed by the trim ring, on either side of the fixture. This latest version adds one more LED for a total of 5. The redesign still allows this updated model to fit in the same cut-out as the older models, to make upgrades easy.Features:   12/24 V - 12 W Polycarbonate Lens UV Resistant Hidden Mounting Screws Cool white LED color (5,500 - 6,300K) Temperature of LED: less than 158° with 77° ambient temperature Five 3 Watt Samsung 3535 LEDs 1,000 Lumens Equivalent to 120 Watt Halogen bulbs LED Lifetime: 50,000 Hours LED Beam angle: 110° 0.8 Amp draw at 12 Volt IP68 Fits the previous cutout Dimensions: 6” W x 2-1/2” H x 1-3/4” D Cutout: 4-1/2” W x 1-1/2” H

Read more less

RGBW Surface Mount Courtesy Light - Stainless SteelThe Shadow-Caster marine LED Courtesy Light is an innovative solution for lighting accent areas, hatches, steps, coves, shelves, and compartments of your boat or yacht.The high-efficiency marine LED Courtesy Light is available in 5 color output options: single-color white; single-color blue; single-color red; 2 colors (white and blue) as well as a full color (RGB) version. Single-color versions can be controlled with a standard switch. Multi-color and full-color versions can be controlled with Shadow-Caster LED controller options.Features: Low glare design shines light downward from the side emitting housing Single and multi-color versions are available Low current draw LED lighting IP67 design makes light suitable for baitwells Available in polished stainless steel or ABS which includes white and black covers Low-profile design blends with the interior 3-Year Warranty Specifications: Up to 26,000 mCD light output Edge-emitting LED lights with a 110° viewing angle for single lights and 130° for color-changing lights 60mA (single color lights) 120mA (max) (RGB) 10-30 volts input 40,000 hour LED lifetime UV stabilized polycarbonate with submersible enclosure 1.5′ (457mm) of 20 AWG wire IP67 waterproof design Specifications: Housing: Stainless LED Color: White Voltage - Input Range (Volts): 12/24v Box Dimensions: 2"H x 3"W x 8"L WT: 0.2 lbs UPC: 850056320214

Read more less

4" Locker Light with Touch Switch - 10-30V - Stainless SteelThis compact locker light is small enough to mount almost anywhere where light is needed. Designed to illuminate the inside of lockers, hatches, closets, and/or bilges. The light features a 316 stainless steel trim ring and a built-in on/off switch that is backlit with a blue LED so that it is easily located even in the darkest of lockers. A touch-switch sensor immediately turns on the light when activated.Features: IP65 rated for installation in wet lockers Works with 12V and 24V systems Impact-resistant plastic lens 316 Stainless Steel Trim Ring 6 Warm White LEDs (2900-3200K) Surface mount, 2 SS Screws included Specifications: 10-30V Amps: 0.03 Lumens: 210 *The "P" within the part number indicates retail packaging Specifications: Bulb Type: LED Housing: Stainless LED Color: Warm White Voltage - Input Range (Volts): 12/24v Box Dimensions: 2"H x 6"W x 7"L WT: 0.2 lbs UPC: 786142417417

Read more less

LED Cockpit Spreader Light 1440 Lumens - BlackThese marine grade LED Cockpit Spreader Lights feature six 3W high intensity Epistar LEDs that produce 1440 lumens. The wide beam polycarbonate lens provides ample illumination for sail trim or deck work. Constructed of a powder coated die cast aluminum housing with a stamped 304 stainless steel mounting bracket. Available in black or white. Low amp draw. 1A @ 12VDC. IP68 waterproof rating. CE, RoHS compliant. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

1-Mile Zamak Sidelight Bi-Color CombinationThese die-cast Zamak sidelights with Perma-Plate® finish provide one-mile visibility for power boats up to 39.4' (12 meters). Mounts on decks or gunwales with external screws. Includes 7.5-watt lamp and 7" hard wire leads for 12 VDC electrical connection.Housing completely encases socket. Installs with two #8 fasteners (not included). Provides 1-mile, 225° light visibility.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lens Color: Red/Green Visible Range (Miles): 1nm Housing: Chrome Plated Voltage - Input Range (Volts): 12v LED: No Box Dimensions: 2"H x 3"W x 5"L WT: 0.5 lbs UPC: 022697637536

Read more less

Navimount RIB Self-Adhesive Mount for Inflatables - WhiteWorks with Navilights with magnet or Navimount mounting system. Mounts to bow of inflatable. Includes self-adhesive sticker that works on boats made of Hypalon, Polyethylene or PVC.Use #960 converter for #001, 010, 041, 305 & 341 lights. #040 & 340 do not require converters. Replaces old #525. Specifications: Type: Mounting Brackets Housing: White Box Dimensions: 2"H x 3"W x 5"L WT: 0.3 lbs UPC: 814154018718

Read more less

All-White 5 Mode 360° 2NM with Suction BaseThe Navisafe suction mount light "Navilight 360° 2NM" combines two successful Navisafe products into one - the Navilight 360° 2 NM and the Bendable Suction mount.The Navilight 360° 2NM is the ready to go Navigation light solution to be securely mounted on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat. Furthermore the suction cup can be used to hold a GoPro® camera (Hero / 2 / 3) when no light is needed - the mount is fully compatible!Navisafe supplies a 3M VHB self-adhesive "landing pad" to securely attach the light on abrasive surfaces and the innovative curved "landing pad" to attach the light on inflatable boats.Features: USCG Approval, 2 Nautical Miles 5 Modes: 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light, Cabin light Includes dual function suction mount - holds Navi light 360° S or GoPro®/Action camera or any other accessory utilizing the mounting bracket Floats light facing up Submersible to 20m Corrosion resistant 3M VHB self-adhesive "landing pad" to securely attach the light on abrasive surfaces 3M VHB self-adhesive curved "landing pad" to securely attach the light on inflatable boats Nneoprene stow away bag Powered by three AAA batteries (not included) Size: H = 95 mm, O = 68 mm Weight (net): 139g Mounting SystemThe Navilight 360° 2NM differs from the Navilight 360° 2NM through its mounting system - while the Navilight 360° 2NM is supplied with the Navisafe magnetic mounting system the Navilight 360° 2NM is directly fixed to a suction cup mount. The Navilight 360° 2NM can be easily mounted on all flat and smooth surfaces like the outboard engine, the steering console, the windshield or any place on the hull where the lights are seen best. Navisafe supplies a 3M VHB self-adhesive "landing pad" to securely attach the light on abrasive surfaces and a curved "landingpad" to attach the light on inflatable boats.*Please note: Suction mounts are most suitable for short-term mountings - changes in temperature and humidity may make them lose their grip. Specifications: Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) Visible Range (Miles): 2nm Lens Color: White LED: Yes Housing: Black Box Dimensions: 3"H x 4"W x 6"L WT: 0.55 lbs UPC: 814154018725

Read more less

Navilight Tricolor 2NM w/Navibolt Base & RIB Mount - WhitePortable Tricolor Navilight with Navibolt base, compatible with Navisafe Navimount system. This is an extremely durable and strong solution. This is a very low and tight mounting solution together with the any of the Navimount.Technical Specifications: US Coast Guard approved for 2 nautical miles 5 Modes: Tricolor Masthead light (135x white, 112,5x red, 112,5x green), BiColor side light, red side light, green side light, white Sternlight Floats light facing up Submersible to 20M/66' Corrosion resistant Powered by three AAA batteries (not included) Navimount RIB - WhiteThe Navimount RIB is designed to securely attach the Navilights with Magnetic base, Navimount base or Suction base to the tube of inflatable boats.Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960Navilight models 041 and 341 do not require additional converters and can be mounted directlyIncludes:"3M" self-adhesive sticker working on boats made from Hypalon, Polyethylene or PVC.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Housing: White Lens Color: White/Red/Green Visible Range (Miles): 2nm Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) LED: Yes Box Dimensions: 2"H x 3"W x 5"L WT: 0.5 lbs

Read more less

Navilight 360° 2NM White w/Navimount Base & RIB Mount - White Navimount Base Lights will work with Railblaza mounting systems, when used with the Railblaza 932 converter. Navimount base lights include a U-Bracket and Navibolt-bracket.Features: 360° All-round/Anchor light with 15 hour burn time 225° Masthead light with 24 hour burn time 135° Sternlight with 32 hour burn time Safety/Flashing light with 85 hour burn time Cabin/Courtesy light with 72 hour burn time Navimount RIB - White The Navimount RIB is designed to securely attach the Navilights with Magnetic base, Navimount base or Suction base to the tube of inflatable boats. Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960 Navilight models 041 and 341 do not require additional converters and can be mounted directly Includes:"3M" self-adhesive sticker working on boats made from Hypalon, Polyethylene or PVC.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Lens Color: White Visible Range (Miles): 2nm Housing: White Voltage - Input Range (Volts): 3 AAA Batteries (Not Included) LED: Yes Box Dimensions: 2"H x 3"W x 5"L WT: 0.6 lbs

Read more less

Newt - Livewell & Courtesy Light - Red DimmingWet or dry, it doesn't matter. Lumitec's Newt line was originally designed as a livewell light. But when our customers saw its small size, amazing output, and ease of installation it found use under cabinets, in storage lockers, lighting toe kicks, and even overhead. Choose white, red, or blue light. Completely sealed and IP67 compliant. Silicone gasket included.Specifications: Voltage: 10 - 16V DC 12V DC Amps: 45mA 24V DC Amps: N/A Correlated Color Temperature: 5000 Color Rendering Index: 70+ Rated Watts: 2 Lumens (White): 19 Operating Temp (°F): -31 to + 131 F Operating Temp (°C): -35 to +55 C Width: 0.88" (2.22cm) Height: 0.88" (2.22cm) Depth: 0.78" (1.98cm) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Clear LED Color: Red Dimming: Yes Box Dimensions: 1"H x 3"W x 3"L WT: 0.1 lbs UPC: 089300103499 Quick Guide (pdf)Brochure (pdf)

Read more less