SC3 Series Underwater Light - Full-Color Change - 12-Color Standard or Unlimited Colors with Shadow-NET®The SC3 underwater light provides your vessel with 24 watts of intense LED lighting. The SC3s are designed with a sub-compact 3” diameter hard anodized aluminum housing for under the waterline surface mounting. Single color or color-changing versions are available with variable brightness and a wide array of control options.Features:
Proprietary clear gel-filled design, injected through the entire unit - eliminates condensation and/or water intrusion under stress
Tough, scratch-resistant, tempered glass lens with hard-anodized aluminum housing - impervious to acetone, solvents, and demanding marine environments
Transient surge and reverse polarity protection — dramatically prolong unit life
Thermal throttling technology - enables safe operation even out of water
From simple on-off to full-featured lighting effects, the unit is enabled for a host of control interfaces
Specifications:
Up to 3,000 lumens
120-degree beam angle
24-watt power draw
2 amps operating current draw @ 12V
10-30 volts input
3.6” (91.44mm) outside diameter
IP68 fully submersible waterproof design
Includes:
Lighting unit
3’ (1M) submersible grade cable
3 mounting screws
3 year standard warranty
Quick Guide (pdf)Brochure (pdf)
Flush Mount Double Beam Halogen Spreader LightModule 6213 Halogen Double Beam Flush Mount Work Lamp (CR). Features:
High Quality HELLA Work Lamps
Hella quality and performance
Over 100 years of excellence in automotive lighting
DuraLED 50 Low Profile Interior/Exterior Lamp - White LED Spreader BeamDuraLED 50LP offers increased light output in an ultra-low profile housing.DuraLED 50LP lamps are an extremely powerful source of white light and offer a safe, energy efficient and reliable alternative to incandescent and fluorescent lighting within an easy to install, surface mount design.These high tech, low profile lamps are available in two light patterns, Spread and Wide Spread, to suit a variety of applications including engine rooms, storage lockers, lazarettes and other heavy duty applications where reliability cannot not be compromised. Each lamp is completely sealed, UV, impact and shock resistant ensuring an ultra-long service life.Multivolt™ circuitry provides constant illumination and circuit protection from 9-33V DC, even under severe voltage fluctuations. DuraLED 50LP lamps meet the requirements of ISO 8846 - Protection against ignition of surrounding flammable gasses by Electrical devices on Small Craft. For details please refer to the Standard.Hella Marine DuraLED 50LP lamps offer class leading energy efficiency, unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind.Specifications:
Lens Material: UV resistant, enhanced impact acrylic
Color Temperature: 5000K (White)
Cable: Pre-wired with 2.5M of twin core marine cable
Operating Voltage: 9-33V DC
Voltage Protection: Spike protected to +500 volts, Reverse polarity protected to -700 volts
Power Consumption: < 12W
Degree of Protection: IP 67 - Completely Sealed
Weight: 380g (including cable)
Installation: Surface mount with robust bush mount
Approvals: CE, ISO 8846 (Ignition Protection)
Specifications:
Bulb Type: LED
Voltage - Input Range (Volts): 12/24v
Housing: White
LED Color: White
Dimming: No
Box Dimensions: 2"H x 6"W x 10"L WT: 1 lbs
UPC: 9416325241904
Brochure (pdf)
Starboard Navigation Lamp- Incandescent - 1nm - Black Housing - 12VCompact and proven navigation lamps for yachts and powerboats.Saltwater resistant and non-magnetic, 3562 series lamps feature a 'snap lock' housing allowing bulbs to be changed without tools.Specifications:
Material Description: UV and impact resistant plastic housing and lens
Minimum Visible Distance: 1 Nautical Mile
Bulb: 12V / 10W SV8.5 included
Installation: Vertical surface mount
Cable Entry: Through base plate with rubber grommet
Degree of Protection: IP 54
Approvals: IMO Col Reg 72, RINA, USCG, ABYC A-16, Maritime NZ
Specifications:
Visible Range (Miles): 1nm
Housing: Black
Lens Color: Green
Voltage - Input Range (Volts): 12v
LED: No
Box Dimensions: 2"H x 4"W x 6"L WT: 0.3 lbs
UPC: 9002920131629
55W Replacement Bulb for RCL-100 Searchlight - 24VHigh intensity 55W Halogen - 24V. Compatible With:RCL-100, RCL-100A, RCL-100B, RCL-100C and RCl-100D searchlights*Sold as an Individual WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications:
Voltage - Input Range (Volts): 24
Box Dimensions: 1"H x 2"W x 3"L WT: 0.1 lbs
UPC: 791659060032
Navimount Horizontal Black with ScrewsThe Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof.Includes:
Horizontal Mount
Two self tapping stainless steel screws
Specifications:
Type: Mounting Brackets
Box Dimensions: 1"H x 3"W x 5"L WT: 0.2 lbs
UPC: 814154018978
Navilight 2NM Tricolor w/Navimount Base & Horizontal Mount - BlackNavimount Base Lights will work with Railblaza mounting systems, when used with the Railblaza 932 converter. Navimount Base lights include a U-Bracket and Navibolt-bracket.Features:
Tricolor Masthead light 135° white, 112.5° red, 112.5° green with 12 hour burn time
BiColor side light with 20 hour burn time
Red side light with 38 hour burn time
Green side light with 38 hour burn time
White Sternlight with 32 hour burn time
Navimount Horizontal - BlackThe Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof.Includes:
Horizontal Mount
Two self tapping stainless steel screws
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White/Red/Green
Visible Range (Miles): 2nm
Housing: Black
Voltage - Input Range (Volts): 3 AAA Batteries (Not Included)
LED: Yes
Box Dimensions: 1"H x 3"W x 5"L WT: 0.5 lbs
Navlight 360° 2NM w/Navibolt Base & Horizontal Mount - BlackPortable All-round white Navilight with Navibolt base, compatible with Navisafe Navimount system. This is an extremely durable and strong solution. It is a very low and tight mounting solution together with any of the Navimount.Technical Specifications:
USCG Approval, 2 Nautical Miles
5 Modes: 360°
Float light facing up
Submersible to 20M /66'
Corrosion resistant
Powered by three AAA batteries (not included)
Modes:
16 White LED 360° Constant lights / 13 - 15hrs
16 White LED 360° Flashing lights / 80 - 85hrs
10 White LED 225° Forward lights / 22 - 24hrs
6 White LED 135° Backward lights / 30 -32hrs
4 White LED 360° Dim function / 70 - 72hrs
Navimount Horizontal - BlackThe Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof.Includes:
Horizontal Mount
Two self tapping stainless steel screws
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: Black
Voltage - Input Range (Volts): 3 AAA Batteries (Not Included)
LED: Yes
Box Dimensions: 1"H x 3"W x 5"L WT: 0.5 lbs
Navilight 360° 2NM White w/Navimount Base & Horizontal Mount - Black Navimount Base Lights will work with Railblaza mounting systems, when used with the Railblaza 932 converter. Navimount base lights include a U-Bracket and Navibolt-bracket.Features:
360° All-round/Anchor light with 15 hour burn time
225° Masthead light with 24 hour burn time
135° Sternlight with 32 hour burn time
Safety/Flashing light with 85 hour burn time
Cabin/Courtesy light with 72 hour burn time
Navimount Horizontal - BlackThe Navimount Horizontal is designed to attach the Navimount Pole or the Navilights with Navimount base (model 040, 340) to horizontal surfaces - e.g. the boat deck or cabin roof.Includes:
Horizontal Mount
Two self tapping stainless steel screws
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: Black
Voltage - Input Range (Volts): 3 AAA Batteries (Not Included)
LED: Yes
Box Dimensions: 1"H x 3"W x 5"L WT: 0.5 lbs
Navimount RIB Self-Adhesive Mount for Inflatable - BlackFeatures:
The Navimount RIB is designed to securely attach the Navilights with Magnetic base, Navimount base or Suction base to the tube of inflatable boats.
Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960
Navilight models 041 and 341 do not require additional converters and can be mounted directly
Includes:"3M" self-adhesive sticker working on boats made from Hypalon, Polyethylene or PVC. Specifications:
Type: Mounting Brackets
Box Dimensions: 2"H x 4"W x 7"L WT: 0.4 lbs
UPC: 814154018985
Navilight 2NM Tricolor w/Navimount Base & RIB Mount - BlackNavimount Base Lights will work with Railblaza mounting systems, when used with the Railblaza 932 converter. Navimount Base lights include a U-Bracket and Navibolt-bracket.Features:
Tricolor Masthead light 135° white, 112.5° red, 112.5° green with 12 hour burn time
BiColor side light with 20 hour burn time
Red side light with 38 hour burn time
Green side light with 38 hour burn time
White Sternlight with 32 hour burn time
Navimount RIB - Black
The Navimount RIB is designed to securely attach the Navilights with Magnetic base, Navimount base or Suction base to the tube of inflatable boats.
Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960
Navilight models 041 and 341 do not require additional converters and can be mounted directly
Includes:"3M" self-adhesive sticker working on boats made from Hypalon, Polyethylene or PVC.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White/Red/Green
Visible Range (Miles): 2nm
Housing: Black
Voltage - Input Range (Volts): 3 AAA Batteries (Not Included)
LED: Yes
Box Dimensions: 2"H x 4"W x 7"L WT: 0.7 lbs
Navilight 360° 2NM White w/Navimount Base & RIB Mount - Black Navimount Base Lights will work with Railblaza mounting systems, when used with the Railblaza 932 converter. Navimount base lights include a U-Bracket and Navibolt-bracket.Features:
360° All-round/Anchor light with 15 hour burn time
225° Masthead light with 24 hour burn time
135° Sternlight with 32 hour burn time
Safety/Flashing light with 85 hour burn time
Cabin/Courtesy light with 72 hour burn time
Navimount RIB - Black
The Navimount RIB is designed to securely attach the Navilights with Magnetic base, Navimount base or Suction base to the tube of inflatable boats.
Navilight models 001, 010, 040, 305, 340 require in addition the Navisafe converter Navimount / 960
Navilight models 041 and 341 do not require additional converters and can be mounted directly
Includes:"3M" self-adhesive sticker working on boats made from Hypalon, Polyethylene or PVC.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications:
Lens Color: White
Visible Range (Miles): 2nm
Housing: Black
Voltage - Input Range (Volts): 3 AAA Batteries (Not Included)
LED: Yes
Box Dimensions: 2"H x 4"W x 7"L WT: 0.7 lbs