Lighting

2" LED Light Pod - Scene Optics - Black Housing - Pro Series 3.0This 2-inch LED POD uses 10-watt Cree XM-L2 LEDs, making it one of the highest performers in its class. The Scene LED POD light for trucks delivers extreme IP69K durability to match its high performing LEDs, giving users confidence that their lights are going to perform when needed.The Scene Light Pod throws light at a 120-degree beam angle, giving users extremely widespread dispersion without a hot spot. This 2-inch LED POD mounts virtually anywhere, and with all the hardware needed in the box, this LED work light is ready to go.Black Oak has taken the LED game to the next level. The Pro Series 3.0 features top-of-the-line LED tech, boasting a 20% increase in lumens, making this series of lights one of the brightest on the market.Features: Scene optics 360° Ceramic Protection against UV, Salt Water & Corrosion 2 Stage Hydrex Seal Lock for IP69 protection and a fully submersible light bar Heavy-duty Dynamax housing for a 4x stronger frame Activities & Uses:  Deck or spreader lights Trailer lighting Rear bumper lights Work lights Mower lights Area light for agricultural equipment Technical Specifications: Total Wattage: 40W Amp. Draw: 2.8 LED Quantity: 4 Weight: 1.6 lbs. Raw Lumens: 3,120 Warranty: Lifetime IP Rating: IP69K     Dimensions with Mounting Bracket (Width x Height): 3.80" x 3.20" In the Box: 2" scene LED light pod Complete wiring harness with fuse, relay, and switch Mounting brackets All hardware, ready to install! *Sold as an Individual Specifications: Amps - Draw: 2.8 Bulb Type: LED Bulb Watts: 40 Waterproof: Yes Wireless: No Box Dimensions: 5"H x 6"W x 6"L WT: 2.35 lbs UPC: 850044517176

Read more less

LED Low Profile Task Light with Touch On/Off/Dimmer Switch - 304 Stainless SteelLED Low Profile Task Light with touch dimmer features 24 warm white LEDs @ 0.19A (145 lumens). Integral touch controlled on/dim/off operation, activated by pressing the center button. Memory function turns the light back on at the same brightness level as when it was turned off. Constructed of corrosion resistant, polished 304 stainless steel. Installs with two #6 FH fasteners (included). 12-28 VDC. IP65 rating. CE compliant.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Dimming: Yes Housing: Stainless LED Color: White Voltage - Input Range (Volts): 12/24v Box Dimensions: 1"H x 6"W x 8"L WT: 0.2 lbs UPC: 035514404648

Read more less

Series 201-011 - Masthead Light - 3NM - Vertical Mount - White - Silver HousingLopolight started out back in 2004, offering many solutions and neat combinations for all size boats and yachts. The tradition continues. Lopolight offers a full range of navigation lights dedicated for boats and yachts, resulting in an elegant,  compact and precise solution with good value for money.  Features:Single Light - MastheadTechnical Specifications: Visibility - 3NM Vessel size - 39.37' to 65.62' (12 to 20M) Operating Voltage - 10 - 32 VDC Number of LED Bulbs - 1 Light Color - White Mounting - Vertical Materials - Anodized aluminum Connection - 2.3' (.7M) cable  IP rating - IP68 Weight - 15.17oz Certifications: U.S.C.G. EN14744 COLREG72 In the Box: Navigation light w/2.3' (.7M) cable  Mounting hardware Installation guide *Sold as an Individual Specifications: Housing: Silver Lens Color: White Visible Range (Miles): 3NM Voltage - Input Range (Volts): 10 - 32 LED: Yes Box Dimensions: 3"H x 6"W x 8"L WT: 0.95 lbs UPC: 879343009700 Quick Guide (pdf)Brochure (pdf)

Read more less

LightArmor Fast Action Bi-Color Pole Light - 14" & 2-PinPremium LED lights with a flexible, impact-resistant composite pole make these perfect for anglers and hunters to maneuver through low-hanging obstacles. The subtle, glare-free black matte finish complements many of today’s boat designs.Features: ISO 19009:2015 Certified Impact-resistant polycarbonate lens Water-resistant Corrosion and UV-resistant LED light engines last for 50,000 hours 2-pin and locking collar  Specifications:Pole Length (inch): 14"*Locking collar design is compatible only with LightArmor Plug-In Bases Specifications: Housing: Black LED: Yes Lens Color: Red/Green Box Dimensions: 3"H x 5"W x 22"L WT: 0.45 lbs UPC: 022697021625 Quick Guide (pdf)

Read more less

Apelo A2 RGB Underwater Light - 3000 Lumens - Bronze Housing - White Lens with Edge LightTurn up the party, select the mood, switch on the fish magnets. Apelo underwater lighting brilliance by Hella Marine lets you do it all. Select between incredibly intense white or vibrant blue for amazing illumination experiences. Take complete control and choose any color you wish with Apelo RGB.Features: Intense white and vibrant blue illumination, or select Apelo RGB for complete control of the color spectrum Optical Intelligence: Wide horizontal illumination with a narrow vertical angle for a spectacular effect Corrosion-resistant thermal polymer housing and Grilamid high strength nylon lens Completely sealed and electronically protected Robust surface mount design Advanced thermal management ensuring ongoing protection and no damage by operation out of the water Charcoal or white lens Suitable for hulls of any material Specifications: Material: Bronze Mounting Style: Surface Voltage - Input Range (Volts): 12/24 Box Dimensions: 4"H x 4"W x 6"L WT: 1.7 lbs UPC: 4082300826548 Brochure (pdf)

Read more less

Low Profile Marine Bar - Flood - Undermount - BlackTHE LOWEST PROFILE MARINE LED LIGHT BAR ON THE MARKETThe Black Oak Low Pro Light Bar – the lowest profile light bar on the market, designed with a streamlined look that mounts flush to your boat. Engineered with built-in dimming, adjustable feet to set the light at the perfect angle, and an IP69 rating for ultimate resistance against saltwater and extreme conditions.With 18 ultra-bright LEDs delivering an impressive 12,000 lumens, this light bar defies its slim size with massive light output. Backed by Black Oak's comprehensive lifetime warranty, the Low Pro Light Bar offers the perfect fusion of style, performance, and durability.Adjustable FeetSet your light at the perfect angle to avoid bow glare and direct the beam exactly where you want it, even if you plan on under-mounting, we have a wide variety of angled feet available to suit your vessel perfectly.Dimmable LEDs Easily control Lowpro's 12,000+ true Lumens with the flip of a switch—there's no need for third-party remotes or dimming controls. Our cool core heat sync keeps OSRAM LEDS cool to allow maximum output for as long as you need it.IP-69 Waterproof HousingThis light bar was engineered to withstand the harshest marine elements, it has been thoroughly tested and has achieved an industry-best IP-69 rating, allowing it to be completely submerged without an issue.Easy to InstallThe Lowpro Light Bar is designed to mount to any type of boat or T-top and is thoughtfully crafted with long cords for easy integration into your boat's power supply. Need more light? Lowpro can be mounted in an array pattern.Do It At NightSee more than your competition, Turn night into day, and put your mind at ease with the ability to see channel markers, boats, buoys, and other hazardous objects. The Lowpro Light Bar is 20% brighter than any other low-profile light on the market.Marine RatedThe Lowpro Light Bar is built to last. Its die-cast aluminum housing and DuPont powder coating is designed to withstand heavy doses of salt water, and UV radiation and can even be immersion up to 3 feet for over 60 hours.What's In The Box? Surface Mount Light 4' Attached Tinned Copper Cord 2 Standard Foot Mounts 316 Stainless Steel Hardware Features: Insanely Bright - 12,000+ TRUE measured lumens Dimmable intensity Adjustable angled foot attachments Lifetime Warranty Powered by 18 OSRAM LEDs 4 Foot cord for easy installs Marine-grade waterproof housing Baricoat Ceramic Shield Technology Lifetime Support Powder-Coated Die Cast Aluminum Construction Available in flood or spot configurations Marine grade IP69K waterproof housing Specifications: Beam Pattern: Flood Housing: Black Length (Inches): 19" Voltage - Input Range (Volts): 12v Box Dimensions: 3"H x 6"W x 21"L WT: 4 lbs UPC: 850044517794

Read more less

Oval 2-Pin Base f/Angled Pole - BlackPart #: 91022-7These 2-pin bases for angled pole lights with locking collars are well-suited for rough conditions or long poles. Features a soft rubber cover with a molded-in gasket to protect the socket from moisture and debris when pole light is stowed away. Provides a 2-pin socket and a 7.5 degree angle and installs on narrow gunwales or deck areas. Completely non-corrosive, they feature contacts which are nickel-plated to resist corrosion and multi-crimped for durability, and wire leads tinned for corrosion resistance.Features: Oval 2-Pin Base specifically for angled pole Black WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)

Read more less

Low Pro™ Marine Spreader Light - Flush Mount - White Housing - Amber LEDThe Most Advanced Marine Spreader Light! The Low Pro™ Spreader is crafted for maximum functionality and ease of use, giving you complete control over your lighting with three built-in settings. Operated through any standard or digital switch, you can toggle between 100% brightness, 50% brightness, or halo-only without needing separate dimmers or specialty switches. These integrated features make achieving the perfect lighting for any situation effortless.The Low Pro™ Spreader Light enhances your boat's style with its sleek and bold design, offering functionality and sophistication. The integrated halo ring lighting adds a clean, modern touch, making it a standout feature for any marine vessel. More than just an aesthetic upgrade, the halo accent light is practical too—providing subtle, ambient lighting that’s perfect for nighttime docking, fishing, or creating a refined atmosphere. Whether you're looking for the best customizable marine lighting or a way to elevate your boat's appearance, the Low Pro™ Spreader delivers on all fronts.Select the Setting You WantEasily customize your lighting with a simple toggle of the switch. The first toggle activates the spreader at 100% brightness for full illumination. The second toggle on/off reduces it by 50% for a softer glow, and the third toggle on/off powers only the halo ring for a stylish accent or subtle nighttime visibility. Not Just for LooksThe halo feature is more than just a bold accent for your boat - it's also a practical lighting solution. Power up the halo at night to softly illuminate the deck without compromising your night vision. Ready to light up your whole boat?Built to LastEngineered to endure the harshest environments, these lights are designed to meet IP69K standards - the highest level of protection against water, dust, salt, condensation, and extreme temperatures. Whether facing salt spray, blazing sun, snow, or high-pressure water, they deliver reliable performance every time. Built for durability and backed by our lifetime warranty, trust you're investing in quality that lasts as long as your adventures! Brightest Spreader on the MarketThe Low Pro™ Spreader delivers unparalleled brightness for its size, making it the brightest marine spreader available, ideal for professional and recreational boaters. With an impressive 2,000 lumens and a wide 120-degree beam pattern, it ensures maximum visibility for every task.Features: Customizable Light Settings: Easily toggle between 100%, 50%, or Halo-only modes to suit your needs. Accent Halo Options: Available in white, blue, red, or amber to match your style or function.  High-Performance Brightness: Produces 2,000 lumens for superior illumination.  Wide Coverage: Features a 120° beam spread to light up large areas with ease.  Marine-Grade Durability: Built with IP69K waterproof housing to withstand harsh marine environments. Easy Integration: Connect seamlessly to your digital or physical switch for hassle-free control.  Versatile Power Compatibility: Operates on a wide range of 9-36V DC inputs.  High-Grade Polycarbonate Bezel: Designed to easily snap on, the bezel conceals all mounting hardware for a clean, seamless finish. Unlike a powder-coated finish, it resists fading and flaking over time, even in the toughest saltwater environments. Plug-and-Play: Engineered with a footprint similar to most standard spreader lights, allowing for easy easy installation without the need for custom modifications. What's in the Box? Flush-Mount Low Pro™ Spreader Light 3/16 Stainless Steel Mounting Screws

Read more less

Horizontal Bracket 1" - IndividualThe horizontal ATV light bar mount is perfect for adding your Black Oak LED pod lights on any circular surface. This mounting point is designed specifically for our LED POD lights which use an 8m bolt. Whether you're mounting lights on a front bumper or roll bar of your UTV, this tube mounting bracket is a perfect solution for a clean and easy install.

Read more less

D-Series Lens Cover - BlackRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less

Radiance + Curved 40" Light Bar - RGBWThe stylish versatility of the RIGID Radiance light bars just got better. Now introducing Radiance+ Curved RBGW light bars. The latest addition to the Radiance light family provides the ability to toggle between eight available backlight options with the flip of a switch: red, green, blue, light blue, purple, amber, white, or demo mode. The RIGID Radiance+ Curved RGBW bars are built with the same high-grade aluminum alloy housing as RIGID's legendary RDS-Series but include a stylish color-changing backlight.Inside, the Radiance+ Curved RGBW bars are feature-packed, with a black exposed circuit board and optimized forward-projecting Spot Drive optics that combine the attributes of a spot and a drive beam pattern. The Radiance+ Curved RGBW light bars take the customization of your vehicle to the next level. Own the night in style with Radiance+ RBGW lighting.Features: 8 backlighting options (red, green, blue, light blue, purple, amber, white, or demo mode) Backlighting is independently controlled using switch logic. Fits All RDS-Series Light Covers And Mounts Black exposed printed circuit board 10-year warranty 9-15 V DC Black powder coat finish Pressure equalizing vent IP68 compliant - dust and water ingress High-grade aluminum alloy housing and heat sink Over/under voltage protection high-impact polycarbonate lens Mounting brackets are included RFI/EMI protection Rohs compliant Off-road use only Product Comes with: 40-inch Radiance+ RGBW light bar Harness Mounting brackets Media pack Specifications: Size (inch): 40"  Weight (Lbs): 11.50 Optics: Spot drive Watts: 179 Amp Draw: 12.8     Raw Lumens: 16632 Specifications: Beam Pattern: Spot-Driving Combo Housing: Black Length (Inches): 40" Voltage - Input Range (Volts): 12v Box Dimensions: 6"H x 9"W x 45"L WT: 14.85 lbs UPC: 849774034213

Read more less

D-Series Lens Cover - YellowRIGID light covers are the perfect solution for style and function. Give your vehicle a unique look while also protecting your investment. These light covers are made from a durable polycarbonate plastic that offers an extra layer of protection for the lens of your LED light. These covers snap on and off, so swapping them out is simple and easy. They are also perfect for states that require covers on accessory lights. Features: Easy to Snap On & Off Polycarbonate Plastic Extra Layer of Protection

Read more less