Lighting

LED Courtesy Light - White LED Courtesy Lights utilizes three bright LEDs that draw very low amperage and have a very long service life. Stamped 304 stainless steel face plate hides the mounting screws to give this light a sleek, modern look. 55 lumens. Low amperage draws 0.02 amps @ 12V. Installs with two #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Stainless LED Color: White Dimming: No Box Dimensions: 2"H x 4"W x 8"L WT: 0.1 lbs UPC: 035514401586

Read more less

Fold Down All Around Light - 26" Fold Down 360° All Around Lights folds down easily for storage and comes with a white translucent lens. For replacement of existing lighting (not for new construction). Constructed of injection molded nylon and aluminum. Installs with four #10 FH fasteners (not included). 12VDC. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Housing: Black Lens Color: White Visible Range (Miles): 2nm Voltage - Input Range (Volts): 12v LED: No Box Dimensions: 2"H x 2"W x 26"L WT: 0.45 lbs UPC: 035514401302

Read more less

LED Square Courtesy Light - White LED Square Courtesy Lights are recess mounted in a 1" diameter hole, requiring no installation fasteners. Constructed of investment cast 316 stainless steel. This high quality 1-3/8” square light with two LED bulbs can be mounted to cast light up and down or side to side, depending on the required application. 12V.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: Stainless LED Color: White Dimming: No Box Dimensions: 1"H x 3"W x 6"L WT: 0.2 lbs UPC: 035514404723

Read more less

2013-2018 RAM 1500 Bumper Mount for 40" Lightbar - Black2013-2018 Dodge RAM 1500 Bumper Mount - Urethane bumper only. Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar. Features: Aggressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar ∗ Lights sold separately Brochure (pdf)

Read more less

2013-2018 RAM 1500 Bumper Mount for 30" Lightbar - Black2013-2018 Dodge RAM 1500 Bumper Mount - Urethane bumper only. Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar. Features: Aggressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware Fits any one (1) 30" SR-Series, 30" RDS SR-Series, 30" SAE, or 30" Midnight SR-Series RIGID LED light bar ∗ Lights sold separately Brochure (pdf)

Read more less

2018+ Ford F-150 Hidden Grille Mount f/6" Lightbar - Black2018+ Ford F-150 Grille Mount, fits any two (2) 6" SR-Series, 6" SAE, or 6" Midnight SR-Series RIGID LED light bar. Features: Agrressive RIGID Styling Stainless Steel Construction Black Powder Coat Finish Includes All Necessary Hardware Fits any (2) 6" SR-Series, 6" SAE, or 6" Midnight SR-Series RIGID LED light bar ∗Lights sold separately Brochure (pdf)

Read more less

12V Converter Module for Perko LED Combination Masthead/Anchor Lights This module is designed to allow the installation of a Perko LED combination masthead/all round light as an upgrade to an existing incandescent combination masthead/all round light without rewiring the original incandescent switching arrangement of the boat navigation light system.Wiring Note: Because direct wire-to-wire substitution of an older style incandescent light with this new style L.E.D. light will not work, there are two installation alternatives: Rewire the existing switch to match the diagram supplied in the L.E.D. light instructions or, Use the optional converter module (Cat. No 1680DP012V) and follow the wiring in the instructions provided with the new L.E.D. light so that no rewiring of the switch is necessary. Owner's Manual (pdf)

Read more less

LED Utility Light White with White Faceplate These LED Utility Lights are constructed of injection molded Delrin for strength, heat resistance, and dimensional stability. Comes standard with low amp draw white LED bulbs. Surface mounts with four #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Bulb Type: LED Voltage - Input Range (Volts): 12v Housing: White LED Color: White Dimming: No Box Dimensions: 2"H x 4"W x 6"L WT: 0.1 lbs UPC: 035514403474

Read more less

2018 Jeep Wrangler JL Fog Mount f/2 D-Series LightsRIGID Fog Mounts for the 2018 Jeep Wrangler JL stand alone when it comes to auxiliary lighting on and off the road. These mounts give that sleek OEM look but add the incredible look and functionality of the RIGID brand. This mount fits the RIGID D-Series and mounts in the existing OEM location. These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL. Lights sold separately.In the Box:All Necessary Hardware∗ Sold as a Pair

Read more less

Light Bar Security Kit for Flush Mount LightsStainless steel security hardware kit for any of the RIGID Flush-mount LED Lights. Includes security nuts/bolts and necessary security keys for installation. Must be used along with standard hardware supplied with your light.Features:  Stainless Steel Construction Hardware Includes: Security Bolts and Security Keys One (1) kit required for a pair of lights.Disclaimer - RIGID Industries hereby renounces any and all warranties, guarantees, obligations, liabilities, express or implied, arising by law or otherwise, with respect to this security kit, and specifically disclaims any implied warranty of fitness for any purpose.

Read more less

2017-2018 Raptor Triple Fog Mount KitThe 2017-2018 Ford Raptor Fog Light Mount Kit allows you to mount our D-Series (Dually or D2) LED lights (not included) in your Ford's OEM fog lamp locations. This kit gives your otherwise square D-Series lights a clean from-the-factory look without having to drill or cut into your bumper. Made from high quality stainless steel, these adaptor plates are powder-coated black for a long-lasting finish. This kit comes with everything you need to install 6 D-Series lights (not included) in both fog light locations and is backed by RIGID Industries' limited lifetime warranty. Fits 6 D-Series.

Read more less

D-SS Series Pro Driving Surface Mount - Pair - BlackOne of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.Features:  Up to 50,000+ Hour Lifespan IP68 Compliant Impact Resistant Lens GORE® Pressure Equalizing Vent Harness & Switch Included Mounting Brackets Included Specifications:  Watts: 72 Amp Draw: 5.14 LED's: 9 Raw Lumens: 7128 Lux @ 10m: 281.08 Beam Distance: 167.7 m Peak Beam Intensity: 28,108 cd Specifications: Bulb Watts: 72w LED: Yes Box Dimensions: 7"H x 7"W x 14"L WT: 4.65 lbs UPC: 849774027475 Brochure (pdf)

Read more less