Marine Hardware - Deck Fills

Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features: Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap Automatic nozzle shutoff 4-18 gpm Stainless Steel finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Pipe Deck Fill 1-1/2" GasFeatures: 316 S.S. 1-1/2" Pipe Gas Deck Fill with Key Chain included Flange: 3-3/8" Fastener: #10 (3) Weight: 20oz Replacement cap & chain is P/N 6074

Read more less

Spare Gas Cap w/O-Ring & CableBlack polymer gas cap has a slot between the holes.

Read more less

Description: 316 S.S. 1-1/2" Push-Up Hose Deck Fill - Water (Blue) Angle - 90 degrees Chain - Yes Fastener - #10 (3)Flange: 3"Hose Size: 1-1/2"

Read more less

Stainless Steel Flip Top Deck Fill - Gas - 2" Hose Flip Top Hose Gas Fill is constructed of investment cast 316 stainless steel. Installs with four #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Replacement Cap & Chain for 6031, 6032, 6033, 6034, 6394, 6395, 6124B, 6126S. Made of 316 S.S.

Read more less

Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features: Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Automatic nozzle shutoff 4-18 gpm Stainless Steel finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

EPA Pull-UP Deck Fill - 30° - Angled - 1-1/2" - GasFeatures: Type - Gas 30 Degrees Flange - 3" Hose - 1-1/2" Angle - 30 degree Chain - yes Fastener - #10 (3) 316 Stainless Steel 1/4" turn pull-up cap with safety chain EPA approved for audible/visual open/close of cap Color coded and imprinted with international standard symbols

Read more less

Perko Vented Flip Top Cap f/Fills with 1-1/2" Hose White Polymer Easily Mounts Directly on Gunnel with Removing Fill Body Includes Metallic Inserts for Gas, Diesel or Water Fills Integral Tank Vent with Flame Arrestor No Deck Plate Key or Ground Wire Required Flip Top Cap Technical Information Requires 5-1/4" Diameter Mounting Surface Screw Size: #8

Read more less

0543 Vented Fill f/1-1/2" Hose - Straight Neck - Gas - BlackBlack Polymer Cap with Black Polymer Body Black Polymer Strap Integral Tank Vent with Flame Arrestor and Anti Surge Valve Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" O.D. Flange: 3-5/8" Neck Length: 2-7/16" Mounting Hole Dia.: 2-1/8" Screw Size: #8

Read more less

0540 Spare CapPerko's 0540 spare gas cap with chain

Read more less

316 S.S. 2" Push-Up Hose Deck Fill (Gas)

Read more less