Marine Hardware - Deck Fills

Deck Fill for Carbon Canister System - Angled Body & Scalloped Chrome CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Compatible with Ethanol blended fuels Designed and tested to prevent water from entering the fuel system Automatic nozzle shutoff 4-18 gpm Dual 1 psi overpressure relief safety valves built into the deck fill caps EPA / CARB Certified Deck Fill for Carbon Canister System, angled, chrome finish Quick Guide (pdf)

Read more less

Replacement Cap & Chain for 6031, 6032, 6033, 6034, 6394, 6395, 6124B, 6126S. Made of 316 S.S.

Read more less

Diesel Fill w/ Locking Cap for 1-1/2" Hose(0599) Chrome Plated Zinc Alloy Flange Black Plastic Body Black Plastic Cap w/ Strap Grounding Screw Included Cap Retainer and Gasket Locking Cap has a cover for the key hole Tech Info for Hose Size: 1-1/2" O.D. Flange: 3-3/8" Length of Neck: 3-1/8" Mounting Hole Dia.: 2-1/8" Screw Size: #8 Quick Guide (pdf)

Read more less

Deck Fill Replacement Cap & ChainThis Attwood Replacement Cap and Chain is made for Attwood deck fills. The flush cap is slotted for a separate key and features an O-ring that seals the cap watertight. Features:Cap is attached by a stainless steel beaded chainSpecifications (Cap and Chain are Fitted for This Deck Fill Size): 3-1/4 (inch) Fill Neck Length 1-7/8 (inch) installation hole size 3-inch flange size Fits 1-1/2 (inch) I.D. Hose *Key sold separately Quick Guide (pdf)

Read more less

Description: Key for all 316 S.S. Deck Fills.Material: 316 Stainless Steel

Read more less

White Flip Top Cap Fills for 1-1/2" Hose - WhiteFeatures: White Polymer Integral Tank Vent with Flame Arrestor No Ground Wire Required EPA Compliant Flip Top Cap with Vacuum Pressure Relief Valve These fills meet the CARB and EPA requirements of U.S.C.G. Safety Standards (July 31, 2011) for 40 CFR Parts 9, 60, 80 et al. Control of Diurnal Emissions From Non-road Spark-Ignition Engines and Equipment. Specifications: For Hose Size: 1-1/2" For Vent Hose: 5/8" Neck Length: 2-7/16" Screw Size: #10 35° Angled Neck

Read more less

Description: Hose - 2" Angle - 90x Chain - YesMaterial: 316 Stainless Steel Fastener: #10 Type: Gas Flange: 3-1/2"

Read more less

Deck Fill for Carbon Canister System - Angled Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: Fits 1-1/2 (inch) fill hose Compatible with Ethanol blended fuels Designed and tested to prevent water from entering the fuel system All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling EPA / CARB Certified Dual 1 psi overpressure relief safety valves built into the deck fill caps Automatic nozzle shutoff 4-18 gpm Deck Fill for Carbon Canister System, angled, stainless steel, single pack Quick Guide (pdf)

Read more less

Replacement Cap and Chain - 6001 Gas FillGas Fill, 1-1/2" Hose w/Splash Shield

Read more less

0590 Vented Fill f/1-1/2" Hose - Angled Neck - ChromeChrome Plated Bronze Cap Black Polymer Body Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve (on diesel only) Deck Plate Key Not Required *Note: Consider using the Mounting Ring (Fig. 0540DPRBLK) for all installations. DP package includes mounting ring. Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" Mounting Hole Dia.: 2-1/8" O.D. Flange: 3-3/8" Neck Length: 2-7/16" Screw Size: #8

Read more less

Description: 316 S.S. Hose Deck Fill with Key for Oil Flange - 3" Hose - 1-1/2" Angle - 90 degrees Chain - yes Fastener - #10 (3) Weight - 12.8 oz.

Read more less

Pipe Deck Fill 1-1/2" GasFeatures: 316 S.S. 1-1/2" Pipe Gas Deck Fill with Key Chain included Flange: 3-3/8" Fastener: #10 (3) Weight: 20oz Replacement cap & chain is P/N 6074

Read more less