Marine Hardware - Deck Fills

Deck Fill for Pressure Relief Systems - Angled Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling.Features: Fits 1-1/2 (inch) fill hose and 5/8 (inch) vent hose Triple high-flow vacuum valves ensure maximum make-up airflow (compatible with high HP applications) Dual 1 psi diurnal emission control and overpressure relief safety valves built into the cap Automatic nozzle shutoff 4-18 gpm Stainless Steel finish An essential component of VaporTec and SecureStop Designed and tested to prevent water from entering the fuel system EPA / CARB Certified Hinged audible click cap meets EPA requirements Meets CARB 13 CCR 2235 and ISO 13331 nozzle mating and retention standards *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Fuel System Locking Cap f/ 1-1/2" Non-Vented Fills(1324) Black Plastic with Gasket Built in Lock Cylinder Size #0 Fits PERKO Fills 1313 & 1399 Cap Outside Thread Diameter: 1-15/32" Specifications: Construction: Plastic Box Dimensions: 2"H x 3"W x 6"L WT: 0.15 lbs UPC: 085226029707 Quick Guide (pdf)

Read more less

Combination Vented Gas Fill/Tank for 1-1/2" Hose - 35° Angled Neck Features: 35° Angled Neck Black Polymer Integral Tank Vent with Flame Arrestor No Ground Wire Required Flip Top Cap Specifications: For Hose Size: 1-1/2" For Vent Size: 5/8" Neck Length: 2-7/16 " Screw Size: #10

Read more less

Description: 316 S.S. Hose Deck Fill with Key for Waste Flange - 3" Hose - 1-1/2" Angle - 90 degrees Chain - no Fastener - #10 (3) Weight - 12.8 oz.Material: 316 Stainless Steel Type: Waste

Read more less

0540 Spare CapPerko's 0540 spare gas cap with chain

Read more less

0543 Vented Fill f/1-1/2" Hose - Straight Neck - Gas - BlackBlack Polymer Cap with Black Polymer Body Black Polymer Strap Integral Tank Vent with Flame Arrestor and Anti Surge Valve Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" O.D. Flange: 3-5/8" Neck Length: 2-7/16" Mounting Hole Dia.: 2-1/8" Screw Size: #8

Read more less

Stainless Steel Flip Top Deck Fill - Gas - 1-1/2" Hose Flip Top Hose Gas Fill is constructed of investment cast 316 stainless steel. Installs with four #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

0540 Gas Fill/Vent for 1-1/2" Hose - Angled NeckFeatures: Angled Neck Chrome Plated Bronze Cap Black Polymer Body Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve Deck Plate Key Included Quick Guide (pdf)

Read more less

Gasoline Deck Fill - 1-1/2 inch Stainless Steel AlloyFor 1-1/2 (inch) inner diameter hose. This deck fill is imprinted and color-coded to specify GASOLINE. The flush cap is slotted for a separate key and features an O-ring that seals the cap watertight. Cap is attached by a stainless steel, beaded chain. Long neck accommodates thick deck laminations. Key sold separately.Features: Highly-polished finish  “Gasoline” imprint with Red Color Code (Not for use with EPA Certified systems) Specifications: 3-1/4 (inch) Fill Neck Length 1-7/8 (inch) installation hole size 3-inch flange size Fits 1-1/2 (inch) I.D. Hose *Requires a bonding wire to prevent sparking when the nozzle is inserted on gasoline and diesel models per USCG and ABYC H-24 requirements Quick Guide (pdf)

Read more less

0591 Vented Fill f/1-1/2" Hose - Straight Neck - ChromeChrome Plated Bronze Cap Black Polymer Body Straight Neck & Heavy Duty Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve (on diesel only) Deck Plate Key Not Required *Note: Consider using the Mounting Ring (Fig. 0540DPRBLK) for all installations. DP package includes mounting ring. Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" Mounting Hole Dia.: 2-1/8" O.D. Flange: 3-3/8" Neck Length: 2-7/16" Screw Size: #8

Read more less

0541 Vented Fill f/1-1/2" Hose - Straight Neck - Gas Straight Neck Chrome Plated Bronze Cap Black Polymer Body Stainless Steel Bead Chain Integral Tank Vent with Flame Arrestor and Anti Surge Valve Deck Plate Key and O-Ring Included Technical Information For Hose Size: 1-1/2" For Vent Hose: 5/8" O.D. Flange: 3-3/8" Mounting Hole Dia.: 2-1/8" Neck Length: 2-7/16" Screw Size: #8

Read more less

Stainless Steel Flip Top Deck Fill - Gas - 2" Hose Flip Top Hose Gas Fill is constructed of investment cast 316 stainless steel. Installs with four #10 FH fasteners (not included). USCG regulations require bonding wire to prevent sparking. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less