Marine Hardware

Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 18" These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Gate Latch Investment cast 316 stainless steel construction for corrosion resistance and durability. This gate latch is designed to be used with 1-1/4" square tubing. Ideal for pontoon gates. Installs with 1/4" thru bolt (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Footrest & Bushing Set - 2-7/8" - BlackFeatures: Footrest Easily Mounts To Several Sized Pedestals Split Design Allows Mounting Without Removing Seat Internal Plastic Bushing Prevents Scratching Of Pedestal WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Footrest Replacement Bushing - 3.5"Internal Plastic Bushing Prevents Scratching Of PedestalWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Compression Handle Replacement KeyReplacement key for Part #6228B, 6228W, S-1415B and 3726B.

Read more less

T-Handle Latch - Chrome Plated Zamac/White Nylon - No Lock - Freshwater Use OnlyFeatures: Nylon Body and CP Zamac handle non-locking T-Handle latch Short Offset Cam Bar Nylon body is white Neoprene O-ring Shaft is 1-3/8" long Chrome Plated Zamac parts should be installed on fresh water boats only

Read more less

Two-Bottle Rack Holds two 750ml wine bottles or two standard size water bottles 8-3/8"L x 5-1/2"H x 3-3/4"D Bulkhead mount

Read more less

Description: 316 S.S. Hose Deck Fill with Key for Water Flange - 3" Hose - 1-1/2" Angle - 90 degrees Chain - yes Fastener - #10 (3) Weight - 12.8 oz.

Read more less

Gas Fill f/1-1/2" Hose - Chrome Plated Zinc, Black FlangeFeatures: Chrome Plated Zinc Alloy Flange Black Polymer Flange Black Polymer Cap with Strap Grounding Screw Included Cap Retainer and Gasket Specs: For Hose Size: 1-1/2" O.D. Flange: 3-1/8" Neck Length : 1-7/8" Mounting Hole Dia.: 2-1/8" Screw Size: #6

Read more less

EZ Board Boarding Handle - 48"Removable boat boarding assist handle. Converts a standard fishing rod holder for use as a boarding assist handle. Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features: Assist in maintaining balance while boarding Slides easily into and out of most flush-mounted rod holders No special tools needed Made from high-impact, corrosion and UV-resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation & Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove Do not force the EZ Board handle to install or remove Note:Please be advised that it is up to the customer to drill the holes so that they can orient the handle as they would like. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder.

Read more less

SuproFlex Rub Rail Kit - Black with Flex Chrome Insert - 1.6"H x .78"W x 60'LThe SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Pairs with V12-0307CP (included in kit) Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Mechanical Hatchlifter 12" STK FastThe AV hatch lifters are electromechanical products, especially designed for marine use on pleasure boats. They allow full or partial opening and closing of heavy engine hatches, peak tanks, hatch beams etc. By activating a switch, it is possible to lift the hatch to any desired position from closed to full open; an internal self-locking mechanism will maintain the position preventing any accidental hatch closing. In case of a power failure, an emergency device allows for manual opening.The Uflex AV hatch lifters do not require any maintenance, are easy to install, and are made of materials resistant.Features: According to the load required, the AV hatch lifter can be mounted individually, or in twin-cylinder installations for heavier loads. It is also possible to install more than two AV actuators in multiple applications.  Maximum load for single installations: 1200N (120 kg - 265 lbs)  Maximum load for dual installations: 2400N (240 kg - 529 lbs)  Maximum load is recommended not to be exceeded.  Supplied with all mounting hardware.  Stainless steel telescopic ram for manual operation in case of emergency.  Available on request without a manual emergency opening device for high-performance boats.  Circuit breaker to stop accidental overloading of the system and electronic stop at the closed or fully open position.  IP 65 protection rated  Speed: 25mm/sec no load applied, 17 mm/sec maximum load  Current absorption in single installations: 10A at 12V, 5A at 24V  Current absorption in dual installations: 20A at 12V, 10A at 24V  AV 12VDC models are Ignition Protected. UL1500 - ISO8846 approved. Specifications: Volt: 12V DC Stroke: 300mm (12") Length A (full closed actuator): 677 mm (26.6") Ø External: 48 mm (1.9")

Read more less