Marine Hardware

10" Gas Spring 10lb - Black NitrateFeatures: Black Nitrate Gas Spring Ext. Length: 10" Comp. Length: 7" Rod Dia.: 8mm Tube Dia.: 18mm P1 Force: 10 *Gas Spring bodies are constructed of heavy-duty steel coated with heat-cured black nitrate paint*O-ring insures proper sealing to force oil toward the orifice piston*Hydraulic fluid specially formulated to provide end of travel damping*Piston assembly provides precise control during the extension Specifications: Lift Capacity: 10 lbs Length: 10" Box Dimensions: 1"H x 1"W x 12"L WT: 0.3 lbs UPC: 725060801014

Read more less

Door HingeSize:1-1/2" x 3"Fastener: #8(6)Material: Chrome Plated Zamac*For Freshwater Installation Only Specifications: Material: Zamac Color: Chrome Box Dimensions: 1"H x 1"W x 1"L WT: 0.2 lbs UPC: 725060149215

Read more less

Description: 316 S.S. Hose Deck Fill with Key for Diesel Flange - 3" Hose - 1-1/2" Angle - 90 degrees Chain - yes Fastener - #10 (3) Weight - 12.8 oz.Material: 316 Stainless Steel Type: Diesel

Read more less

Bow Eye - 3/8" - Machined 304 Stainless SteelThese Bow Eyes are for use as a tie-down point on your boat’s bow. The 3/8" shafts have rolled threads. Constructed of corrosion-resistant machined 304 stainless steel. Includes adjustable finish nuts, which provide superior performance over crimp ring-style stern eyes. Can be used in conjunction with Lift Eyes (048330 or 048350) for a more robust lifting assembly.Specifications:Threads: 3/8" NC Specifications: Type: Parts Box Dimensions: 1"H x 4"W x 8"L WT: 0.35 lbs UPC: 035514080095

Read more less

Footrest & Bushing Set - 2-7/8" - BlackFeatures: Footrest Easily Mounts To Several Sized Pedestals Split Design Allows Mounting Without Removing Seat Internal Plastic Bushing Prevents Scratching Of Pedestal WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Footrest Replacement Bushing - 3.5"Internal Plastic Bushing Prevents Scratching Of PedestalWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

T-Handle Latch - Chrome Plated Zamac/White Nylon - No Lock - Freshwater Use OnlyFeatures: Nylon Body and CP Zamac handle non-locking T-Handle latch Short Offset Cam Bar Nylon body is white Neoprene O-ring Shaft is 1-3/8" long Chrome Plated Zamac parts should be installed on fresh water boats only

Read more less

Description: 316 S.S. Hose Deck Fill with Key for Water Flange - 3" Hose - 1-1/2" Angle - 90 degrees Chain - yes Fastener - #10 (3) Weight - 12.8 oz.

Read more less

EZ Board Boarding Handle - 48"Removable boat boarding assist handle. Converts a standard fishing rod holder for use as a boarding assist handle. Installation is EZ. Simply insert the handle into the rod holder until the locating pin engages, then rotate to lock.Features: Assist in maintaining balance while boarding Slides easily into and out of most flush-mounted rod holders No special tools needed Made from high-impact, corrosion and UV-resistant PVC Five (5) Year Replacement Warranty Made in the USA Installation & Removal Instructions: Installation: Slide the EZ Board handle into the rod holder until the locating pin engages the EZ Board slots. Rotate the handle to the right or left to lock in place. Both ends of the EZ Board handle are slotted for ease and convenience. Simply adjust the orientation of the handle to achieve the optimal position for boarding and balance Removal: Rotate the handle until the rod holder pin aligns with the EZ Board slot, then pull out to remove Do not force the EZ Board handle to install or remove Note:Please be advised that it is up to the customer to drill the holes so that they can orient the handle as they would like. The handle can be placed in the position they would like to use it, whether it is from boarding from the dock or the swim ladder.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Four Drink/Binocular Rack - TeakFeatures: 14-1/4"L x 4"W x 3-1/2"H Holds 4 cans or bottles, or 2 drinks and one pair of binoculars

Read more less

Offset HingeSize:1-1/2" x 2-1/4"Fastener: #8 FHMaterial: 304 Stainless SteelOffset:3/4" Specifications: Material: Stainless Steel Color: Stainless Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 725060343910

Read more less

Deck Fill for Carbon Canister System - Angled Body & Scalloped Chrome CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Compatible with Ethanol blended fuels Designed and tested to prevent water from entering the fuel system Automatic nozzle shutoff 4-18 gpm Dual 1 psi overpressure relief safety valves built into the deck fill caps EPA / CARB Certified Deck Fill for Carbon Canister System, angled, chrome finish Quick Guide (pdf)

Read more less