Marine Hardware

Stainless Steel Release Pin 1/4” x 1-1/2”Standard-duty detent release pins are ideal for basic holding and removal applications that don't require a positive locking ball feature. These quick-release pins are activated by a push or pull motion. The detent ball depresses and springs up for "quick release" applications. This robust, durable design is suitable for repetitive-use applications. Ideal for anchor clevis fittings, hinge pins, or to replace cotter pins where frequent removal is necessary.Features: Includes a split ring for attachment of an optional lanyard Constructed of corrosion-resistant 304 stainless steel Specifications: Pin Length (up to the split ring): 1-1/2” Pin Width: 1/4” Split Ring Diameter: 1” WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quarter-Turn Smooth Deck Plate with Internal Collar - White - 4" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Smooth Quarter Turn Deck Plate - White - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. Easy to open and close. A specially engineered lubricated gasket is used in conjunction with a knife edge for a leak tested seal. Installs with six #8 FH fasteners (not included). Patent Pending. Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Stud Mount Handrail - 6" The Stud Mounted Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance and durability. Designed to provide a sleek, smooth handrail transition to the mounting surface your boat. Functional and attractive, with no visible mounting hardware. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. Features: All Attwood pressure relief systems are designed to ensure water does not enter the fuel tank and are compatible with Jerry Can and marine nozzle refueling Fits 1-1/2 (inch) fill hose Designed and tested to prevent water from entering the fuel system Compatible with Ethanol blended fuels Stainless Steel finish EPA / CARB Certified Dual 1 psi overpressure relief safety valves built into the deck fill caps Automatic nozzle shutoff 4-18 gpm Quick Guide (pdf)

Read more less

Description: 10" Galvanized Dock Cleat. Fasteners - 7/16" Use Hexhead FastenersDimensions: L: 10" H: 1-15/16" Specifications: Finish: Galvanized Size: 10" Construction: Galvanized Box Dimensions: 1"H x 2"W x 10"L WT: 2.2 lbs UPC: 725060152215

Read more less

Belle Adjustable Pedestal - 13" to 17"Adjustable Post With 10″ Round Base And Trac-Lock™ Seat Mount. Rotates 360°, Easy Grip Handles. Fits Standard Boat Seats. Corrosion Resistant Powder Coat Finish.Rated ABYC Class H-31 B (Fishing Only) WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Taper-Lock™ Manual Adjust Post - 13" to 16" for 2-3/8"2-Piece Manual Adjustable Set Includes: 2-3/8″ Manual Adjustable Post With Posi-Lock System Trac-Lock™ Non-Locking Swivel (3100031-1) Use With Any Taper-Lock™ Base (sold separately) Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

KingPin™ Standard Hi-Lo 3-Piece Package - 15-1/2"Hi-Lo 3-Piece Set Includes: Standard 13″ KingPin™ post, anodized finish 1610413-A KingPin™ Hi-Lo swivel, e-coat finish (1615201-EC) Standard KingPin™ 7″ x 7″ base, satin finish (1620001) Rated ABYC Class H-31 B (Fishing Only)  WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Chrome Plated Bronze Cabin Door Hook - 3"Features: Cast Bronze Chrome Plated

Read more less

7-1/2" Gas Spring - 20lb - Black NitrateFeatures: Black Nitrate Gas Spring Ext. Length - 7-1/2" Comp. Length - 5-1/2" Rod Dia. - 6mm Tube Dia. - 15mm P1 Force - 20 Specifications: Lift Capacity: 20 lbs Length: 7-1/2" Box Dimensions: 1"H x 1"W x 10"L WT: 0.25 lbs UPC: 725060312015

Read more less

Nisida Steering Wheel 13.8" - Black Polyurethane Grip with Black Aluminum SpokesFeatures: Standard 3/4″ Taper X63 – 40119D Hub with Button (To Be Ordered Separately) Hub and Center Cap Included Meet with the EN 28848 and ABYC P22 Standards Specifications: Dimensions: 13.8" Hub Included Steering Wheel Dish: 3.35"

Read more less