Marine Hardware

Faux Center Nut - Chrome/Plastic - 1/2" & 3/4" Base for Cast Steering WheelsThe look of Stainless Steel at a fraction of the cost. Made with Chrome ABS Plastic.

Read more less

Command Ratchet Hinges - 9-3/8" - Polished 316 Stainless Steel - PairConstructed from high-grade stainless steel and brass, our Command Ratchet Hinge is ideal for sunpads, bolsters and lounge backrests. This heavy-duty specialty hinge has a 15-degree locking inclination and ratchets up to four positions.Features: Highly polished marine-grade stainless-steel Type-316L  All brass bearings for durability  Meets ABYC H-31 standards class B* application, 250lb ft of torque load for pair  15-degree locking inclination increments starting at 30 degrees  Easily adaptable to many applications  Designed for up to 4" thick cushions  Returns to horizontal position at 100 degrees  Countersunk for #10 fastener or 1/4-20 bolt  Sold in pairs  5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

Flex Vinyl Rub Rail Kit - Black with Black Insert - 50' - 1-1/16"Excellent universal rub rail. Fits many different boat models. Convenient kit includes rub rail (in a continuous coil for one piece installation without seams), insert, end caps, screws and installation guide.Features: 1-1⁄16"H x 11⁄16"W x 50'L Black with Black Insert This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Push To Close Latch Point - ChromeWhen your door or drawer design calls for elegant simplicity, make it a point to choose the new push-to-close Southco Point Latch. Its flush-mount design features a retractable metal pull knob that pops up at the push of a button to provide a consistent grip and a solid feeling of quality in the latch's operation. And the latch can be slammed closed and remain secured regardless of the knob's position – exposed or retracted.Features: Point Push To Close Latch Oval Perpendicular Housing Chrome Housing Chrome Knob

Read more less

90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used with a maximum hull thickness of 1 inch.Features: This black vent with a stainless steel vent head meets ABYC standards Flush Mount - 5/8" I.D. hose (inch) 1-3/8" install. hole size (inch) 1" Max. hull thickness *Compatible with Ethanol blended fuels Quick Guide (pdf)

Read more less

Cowl VentilatorAttwood hull-mounted vents are designed to install by fastening as a complete unit from either inside or outside the hull. Ventilation hose (not included) twists into the bottom of the box to form a raised water barrier. Plastic vents are corrosion-resistant, will not discolor. All collector boxes and vents are designed for intake or exhaust and meet ABYC H-2 cross sectional area requirements.For use with 3" I.D. wire-supported ventilation hose. Features flexible hose flange that is screwed onto hose, then vent snaps onto the flange. Vent constructed of chrome-plated die-cast Perma-Plate® ZAMAK. Flange is non-corrosive plastic. Installs with #8 screws.Installation Hole Size: 3-1/4" to 3-1/2"WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Straight Short Cam BarFeatures: Zinc Replacement Cam Bar Straight-Short/with Thread Length: 1-7/8" Includes S.S. Set Screw to adjust distance on shaft. Shaft - 3/8" (metric threads) Length is measured from center of shaft hole to tip of Cam Bar Fits Plastic & S.S. bodies

Read more less

Teak Rod Storage Rack Mounting Boards For mounting Fishing Rod Storage Racks 60610, 60612, 60614 Mount storage racks on bulkheads 3-1/4"L x 1-5/8"W x 9/16"H Sold in pairs Requires 2 sets of mounting boards to mount

Read more less

Strap Hinge - PairLength:6"Width:1-1/8"Fastener:#10(6)Material: Polished Brass Specifications: Material: Brass Color: Brass Box Dimensions: 1"H x 3"W x 6"L WT: 0.4 lbs UPC: 725060060527

Read more less

Slam Latch Stainless Steel Non-Locking Ring PullFeatures: Non-Locking 316 Stainless Steel Lever Pull Ring Slam Latch

Read more less

15" Gas Spring - 40lb - Stainless SteelFeatures: 316 S.S. Gas Spring Ext. Length - 15" Comp. Length - 9-1/2" Rod Dia. - 6mm Tube Dia. - 15mm P1 Force - 40 Specifications: Length: 15" Lift Capacity: 40 lbs Box Dimensions: 1"H x 3"W x 19"L WT: 0.5 lbs UPC: 725060334079

Read more less

Large Handle Kit - PairReplacement handle kit with both Left and Right-sided handles.Compatible With: Flush 3G hatch sizes 27, 30, 44, 60, 70, Bavaria big rectangle and Bavaria big square Coastline hatch, sizes 18, 22, 30, 40, 44, 50, 54, 60, 65 and 70 Ocean hatch, sizes 30, 40, 44, 50, 54, 60, 65, 66 (H.Rassy), 70, 75 and 77 Trimline hatch sizes 30, 40, 50, 60 and 70 Rolltop hatch, sizes 30, 40, 50, 60, 65 and 70 In the Box: One (1) Exterior Handle LH Grey Assembly One (1) Exterior Handle RH Grey Assembly Two (2) O-Ring Two (2) Exterior Handle - Grey Two (2) Base Bush - Grey Two (2) Base Bush O-ring Two (2) Handle packing washers One (1) Handle + Lock RH - Grey One (1) Handle + Lock LH - Grey Two (2) No. 10 Screw *Sold as an Individual

Read more less