Marine Hardware

Rigid Vinyl Flex-Core Rub Rail 2" x 7/8" - Frosty White 60'TACO Marine’s latest Rub Rail innovation is an improved design of our most popular rigid PVC shape with a lightweight, high-density inner core. This allows for easier handling, faster one-piece installation, improved dimensional stability, and production run consistency.Features: Lightweight Easy handling and installation Solid, rigid PVC cap stock exhibits traditional surface characteristics, appearance, and impact properties Continuous coil eliminates butt joints around gunwale, with improved bending characteristics and the ability to cold form Vacuum calibration tooling allows for tighter dimensional tolerance and sizing consistency High-density core offers improved shock-absorbent impact resistance Made in the USA 5-year limited warranty Specifications: Color: Frosty White Length: (feet) 60' Insert: S11-4511 required Drilled and countersunk for #8 screw on 8-inch centers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

Flexible Draw LatchFeatures: Material: Rubber Material: Stainless Steel Finish: Natural Access Restriction: No Restriction Mounting Style: Front Mount Keeper Style: R Operation: Pull Series: 080 Series Latch Assembled: Yes

Read more less

Grabber Catch Latch - Side Mount - Black - Pull-Up Force 22N (5lbf)Features: Spring-loaded over-center latching One assembly includes catch and keeper Material and Finish: PC/ABS, black Performance Details: Operating temperature range: -30ºC (-20ºF) to 60ºC (140ºF) Flammability rating: UL94-HB Installation Notes: Orient keeper to latch. The arrow on the keeper should point towards the cam. Mount to door and adjust for smooth latching. Minimum distance from frame (or surface on which catch subassembly is mounted) to centerline of door hinge is 150 (5.9)

Read more less

SuproFlex Rub Rail Kit with Flex Vinyl Overlay Insert - 2"H x 1-1/4"W x 80'L - Black with Black InsertThe Semi-Rigid SuproFlex Rub Rail Kit with a Flexible Vinyl Overlay Insert – an all-in-one Rub Rail replacement kit that complements a variety of boat types, including bass boats, and freshwater and saltwater bay boats. Semi-Rigid SuproFlex features a semi-rigid vinyl back and a 95-durometer, firmer face, and pairs exclusively with our attractive Flexible Overlay Vinyl Insert for added protection from impact and style. Additionally, this co-extruded vinyl rub rail features shock-absorbing channels for higher impact resistance and requires less heat during installation when compared to other semi-rigid or rigid profiles. This rub rail kit is available in a variety of sizes and colors, and includes stainless steel end caps and screws.Features: Available in one continuous coil of 60' or 80' Co-extruded to provide two levels of hardness Semi-Rigid backing and 95-durometer front Pairs exclusively with V12-9992 Flexible Overlay Vinyl Insert (included in kit) Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Predrilled for fasteners Kit includes stainless-steel end caps and screws Made in the USA 5-year limited warranty

Read more less

Rigid Vinyl Flex-Core Rub Rail 1.58" x .635" - Frosty White 60'TACO Marine’s latest Rub Rail innovation is an improved design of our most popular rigid PVC shape with a lightweight, high-density inner core. This allows for easier handling, faster one-piece installation, improved dimensional stability, and production run consistency.Features: Ideal for boats up to 40 feet long Lightweight, easy handling and installation Solid, rigid PVC cap stock exhibits traditional surface characteristics, appearance, and impact properties Continuous coil eliminates butt joints around gunwale, with improved bending characteristics and the ability to cold form Vacuum calibration tooling allows for tighter dimensional tolerance and sizing consistency High-density core offers improved shock-absorbent impact resistance Made in the USA 5-year limited warranty Specifications: Color: Frosty white Length: (feet) 60' Insert: S11-4511 required (sold separately) Drilled and countersunk for #8 screw on 8-inch centers This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)

Read more less

PSS Shaft Seal 2" Shaft 3-1/4" TubeShaft Diameter: 2"Stern Tube Diameter (D): 3-1/4" to 3-3/8"Total Length (A): 9.175"Total Length (compressed) (Compressed A): 8.175"Rotor Diameter (B): 3.75"Carbon Cuff Diameter (C): 3.25"Stern Cuff Length (E): 2"The PSS Shaft Seal is the number one selling marine mechanical seal worldwide and is installed as standard equipment by many of the worlds most reputable boat builders / yards. The PSS Shaft Seal is also recognized as the premiere retrofit (aftermarket) seal on the world market. Certified by Bureau Veritas, ABS & Rina: Boat builders / yards recognize the advantages and value of installing the PSS as it eliminates the maintenance, constant adjustment & cost associated with traditional packing type glands. Aside from these benefits, the PSS Shaft Seal helps to eliminate water in the bilge (100% water tight) & wear to the propeller shaft. The PSS Shaft Seal can be easily retrofitted and is available for shafts ranging from 3/4" (20mm) to 6" (150mm).The PSS Shaft Seal is a mechanical face seal that is created between the flat surfaces of the rotating stainless steel rotor and the stationary carbon flange. The stationary carbon flange is attached to the vessels stern tube with hose clamps and the carbon flange is attached to the front side of the bellows with hose clamps. The stainless steel rotor is fit on the shaft in front of the carbon flange. The stainless steel rotor is used to compress the bellows before the collar is secured to the shaft with set-screws. This compression (pre-load) maintains contact between the faces and allows the PSS to compensate for the thrust from the propeller. The carbon flange is bored larger than the shaft diameter allowing it to "float" around the shaft and thus compensate for most misalignment and vibration problems. The stainless steel collar is sealed to the shaft by two o-rings that are recessed into the bore of the collar. These o-rings rotate with the shaft and stainless steel rotor and do not experience wear during operation.**As with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. PYI suggests as preventative maintenance that the PSS bellow be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced."Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric acid. Sulfuric acid vapor will accelerate rubber deterioration, as will an ozonater.The Maintenance Kit includes the items you need to properly maintain your PSS Shaft Seal. Included in the kit is one (1) PSS bellow, two (2) O-rings, five (5) set screws, four (4) new hose clamps and an allen key. Brochure (pdf)

Read more less

SuproFlex Rub Rail Kit - Black with Flex Chrome Insert - 2"H x 1.2"W x 80'LThe SuproFlex Rub Rail Kit is lightweight and ultra-flexible to save you time and money while providing a seamless precision fit. The innovative SuproFlex series is co-extruded vinyl that provides two levels of hardness – ensuring enhanced protection from impact. SuproFlex Rub Rail requires minimal heating – reducing installation time and manpower. Additionally, SuproFlex Rub Rail requires no pre-forming and easily molds to most hull shapes. Features: Ideal for boats up to 65' Co-extruded to provide two levels of hardness Rigid backing and soft durometer front Shock-absorbing channels for higher impact resistance Lighter weight than traditional vinyl rub rail Requires no pre-forming and minimal heating Pairs with V12-0307CP (included in kit) Made in the USA 5-year limited warranty This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Stainless Square Tube Top FittingTop Fittings connect to tubing as a Top Cap or Top Insert for 3/4” or 7/8” round tubing or 1” square tubing. Top Fittings create an attachment point and function as a pivot point as part of a Bimini top system. Pin size 1/4”. Constructed of UV stabilized injection molded nylon. Available in black or white. *Stainless tube wall thickness 0.049”.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Quarter-Turn Smooth Deck Plate with Internal Collar - White - 8" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Screw-Out Deck Plate - White - 5" Sea-Dog® Screw-Out Deck Plates are molded to the highest standards using top quality UV stabilizers and antioxidants. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Round Louvered Vent - 5" Round Louvered Vents allow air in while keeping water out. Installs with four #6 FH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction. Vent area 5” 2.02 in2.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Stainless Steel Surface Mount Handrail - 12" Constructed of corrosion resistant formed 304 stainless steel. These Surface Mount Hand Rails install easily with two 5/16" FH fasteners (not included). Locate a hand rail quickly and conveniently wherever needed. 1” OD tubing for a comfortable grip. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less