Marine Navigation & Instruments - Accessories

RayNet to Seatalkhs Socket Adapter CableThe Raynet (F) to SeaTalkhs (F) cable adapter allows you to fit the existing waterproof, locking SeaTalkhs cables used with G-Series, E-Wide and E-Classic MFDs to new generation RayNet multifunction displays.The adapter cable is 15" (400mm) long.

Read more less

14 M ID SIDB Y - SOLIX®/APEX® Side Imaging & 2D Splitter Cable The 14 M ID SIDB Y cable allows for the installation of a separate 2D transducer paired with a Humminbird MEGA Imaging or non-MEGA Imaging transducer and connect both transducers to a single Humminbird control head. This y-cable provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar® 2D transducer to a Humminbird control head that also has a Side or Down Imaging transducer connected at the same time. This cable supports Transducer ID for automatic recognition and easy setup of Airmar® accessory transducers.Features: Compatible with: All SOLIX and APEX models Combines a MEGA Side Imaging transducer (or non-MEGA Imaging) and accessory 2D transducer and allows them to be connected to a single Humminbird control head. Automatically provides Side Imaging, Down Imaging and temperature from the standard all-in-one transducer and sources 2D sonar and digital depth from the 2D accessory transducer, without the need to switch data sources manually Includes Transducer ID for Airmar® accessory transducers, which automatically recognizes transducer type for easy installation and setup. Cable length: 30" (76 cm) 1-Year Limited Warranty

Read more less

MEGA 360 Hardware Kit for Ultrex QuestThis is a MEGA 360 Imaging transducer mount for Minn Kota Ultrex and Ultrex Quest trolling motors. This mount does not include the MEGA 360 Imaging transducer pod or shaft.Features: Mounting plate for installing a MEGA 360 Imaging transducer on a Minn Kota Ultrex QUEST or Minn Kota Ultrex trolling motor This redesigned mounting plate was made to adapt older MEGA 360 transducers to Minn Kota Ultrex QUEST Models Compatible with the following MEGA 360 Imaging shaft/pod assemblies: MEGA 360 Imaging - No Mount, MEGA 360 Imaging - Universal and MEGA 360 Imaging – Ultrex Specifications: Type: Transducer (trolling motor) Warranty: 1-year limited warranty Specifications: Type: Mounting Brackets Box Dimensions: 7"H x 8"W x 10"L WT: 2.1 lbs

Read more less

Power & Audio Module for GXM™ 53This cable with integrated electronics supplies power and a data link to the GXM 53 antenna and breaks out audio.Compatible Devices:GXM™ 53WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 2"H x 7"W x 8"L WT: 0.85 lbs UPC: 753759170585

Read more less

gWind™ Transducer OnlyThe gWind transducer features twin-fin technology with 3-bladed propeller for more accurate TWS in lighter air while the twin-fin design gives a more stable TWA. The 3-bladed propeller, unlike a cups design, is always efficient. Combined with optic reading this transducer provides superior accuracy at low wind speeds and also provides for excellent linearity.This configuration includes only the gWind series transducer, making it easier for you to replace your device if needed.In The Box: gWind™ Transducer Propeller installation instructions Compatible Devices:gWind™ TransducerWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

PC12 Power Cord - 6'6' Power CableCompatible Devices: ION Series ONIX Series WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 2"H x 8"W x 9"L WT: 0.5 lbs UPC: 082324039003

Read more less

Artificial HorizonAnswers the need of every sextant user who cannot depend on a natural sea horizon. Use for backyard practice, finding exact positon when inland, and making exact sextant shot on foggy mornings. To use, fill with water and read the angle of the reflected sun with your sextant. Half your sextant reading is the sun's angle above the true horizon. Windproof and corrosion resistant, the reflecting surface is completely enclosed.Comes with two sun shades, a lid and full directions. Compact 6" x 4" x 1-1/2" (15 x 10 x 4 cm). Owner's Manual (pdf)

Read more less

Bail Mount w/Quick Release Cradle f/ECHOMAP Ultra 10" Surface mount your compatible ECHOMAP™ Ultra chartplotter/sounder combo using our bail mount with knobs; the mount tilts for optimum viewing. Plugging the cables into the mount’s quick-release cradle allows you to seat/unseat your device with ease. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 10"W x 15"L WT: 3.6 lbs UPC: 753759218324

Read more less

GPSMAP® 2-Pin Power/Data Cable - 6'Power and connect your compatible GPSMAP® device with this 6-foot, 2-pin power/data cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 1"H x 5"W x 7"L WT: 0.6 lbs UPC: 753759219079

Read more less

iKonvert with USB InterfaceThe iKonvert NMEA2000-0183 Gateway/Converter is an intelligent and flexible gateway for allowing software applications to read/write NMEA2000 data, either as RAW binary PGN data for ultimate analysis and control or converted to the older and more commonly supported NMEA0183 data.Every popular Marine Navigation application that runs on PC/MAC/LINUX computers, can read NMEA0183 data and for all of those programs, iKonvert provides a simple, reliable and cost effective way to access the navigation data on an NMEA2000 network. Simply set the DIP switches inside iKonvert to the required data mode that you want to use and iKonvert will extract the selected data from the NMEA2000 network and provide them to your marine application in a format and at a baud rate they support.For developers creating new applications or who know how to decode NMEA2000 PGNs, iKonvert can be easily set to its “RAW Mode” where data can be read/written to using a simple serial data format that we publish on our iKonvert Github site. No special libraries or proprietary code are required to integrate iKonvert, which has attracted the interest of a number of developers and it is already compatible with CanBoat and the popular Signal K Node Server.Digital Yacht’s iKonvert Gateway is housed in a compact and easy to mount housing, with an integral USB cable and standard NMEA2000 Micro drop cable (male).  Taking its power from the NMEA2000 network, and providing full galvanic isolation between the USB interface and NMEA2000 network, iKonvert operates at a baud rate of 230KB in “RAW mode” and 4.8KB, 38.4KB or 115KB in NMEA0183 conversion modes. All modes can be simply selected using the internal DIP switches with no special configuration software or firmware changes required.iKonvert’s USB interface features an FTDI chip that has the most reliable and compatible USB drivers for all of the popular operating systems (Windows/Mac/LINUX/Android), whilst an ISO Version of iKonvert will soon be released for direct connection between NMEA2000 and NMEA0183 systems.Features: Small but powerful bi-directional NMEA2000 Gateway/Converter Powered from the NMEA2000 network High Speed USB 2.0 USB Interface (FTDI) Compatible with Windows, OSX, LINUX and Android Can be configured to operate in “Raw Mode” (Binary PGN data) Converts all of the key navigational data Integral USB (Type A) and NMEA2000 Micro (Male) cables Simple configuration of data modes using DIP switches Full galvanic isolation

Read more less

ST-Ng Right Angle AdapterThis is a 90°, right angle spur connector. Used for the multifunction displays.

Read more less

RayNet to RJ45 Male Cable - 1mRayNet network cables are for connecting the Digital Sounder Module (DSM) sonar, SR100 Sirius Weather Receiver and additional compatible Raymarine Multifunction Displays.The RayNet connector is used for connecting Raymarine network switches and SeaTalkhs devices to the multifunction display via RayNet cables. Also required for connecting a crossover coupler if only one device is being connected to the display's Network connector.Features: 1m (3.28ft.) RayNet to SeaTalkhs (RJ45) cable The Raynet (F) to RJ45 Ethernet (M) adapter can be used to connect new a, c, e or gS-Series MFDs to the SR6 or 8-Port Seatalk High Speed network switch.When used in conjunction with a crossover coupler, this adapter can also convert the Ethernet connection on a RJ45 radar scanner cable, DSM or thermal camera for direct-connection to an HS5 network switch, or MFD RayNet port.

Read more less