Marine Navigation & Instruments - Accessories

MEGA 360 PC - MEGA 360 Power CableThe MEGA 360 PC is a 10' marine-grade power cable for a MEGA 360 Imaging transducer. One end provides a quick-disconnect plug for easy connection to an existing MEGA 360 transducer, while the other end features two tinned wires ready for installation to a 12V power source.Features: Replacement power cable for MEGA 360 Imaging Transducers The high-frequency beam of MEGA Imaging CHIRPs across the megahertz range reveals the world below in picture-like detail around your boat. Use MEGA 360 Imaging without sacrificing boat control. Whether trolling or using Spot-Lock, MEGA 360 Imaging is independently mounted, so your sonar picture remains unchanged as the trolling motor turns. Compatible with: All MEGA 360 Imaging transducers Cable length: 10' (3M) 1-Year Limited Warranty

Read more less

GPS 24xd GPS Antenna w/ Heading Sensor - NMEA 2000 EXPLORE COASTAL WATERSThe GPS 24xd position receiver and antenna gives you precise location with multi-band GNSS and heading accuracy even at slow speeds. Navigate in more locations with expanded GNSS support.  Get high-sensitivity tracking with fast GPS update rate.  Accurately pinpoint your heading — regardless of speed. It’s water-resistant (IPX7) to withstand the elements. Install it easily with multiple mounting options.  The antenna is compatible with NMEA 2000® devices. Multi-Band GNSSMulti-band GNSS provides location accuracy to within 1 meter to compatible marine multifunction displays, instrument displays and autopilots.Magnetic HeadingThe magnetic heading sensor provides accuracy to within 3 degrees, stabilizing charts, radar overlay and MARPA even at slow speeds.High-Sensitivity GPSFast 10 Hz position update rates provide high-sensitivity position, velocity and time data.Expanded GNSS SupportGPS 24xd provides access to four key global navigation satellite systems (GPS, Galileo1, GLONASS and BeiDou1) to more accurately track in challenging conditions than GPS alone.Multi-SBAS CompatibleMulti-SBAS compatibility corrects signal measurement errors and provides information about the accuracy, integrity, continuity and availability of its signals.Mounting OptionsInstallation is easy with under-deck, pole and surface-mount options.In The Box: GPS 24xd NMEA 2000® Pole mount Surface mount Under deck mount NMEA 2000 backbone/drop cable (6 meters) NMEA 2000 T-connector Documentation Specifications: Type: Antennas Box Dimensions: 7"H x 7"W x 7"L WT: 2.15 lbs UPC: 753759248215 Owner's Manual (pdf)

Read more less

AS QD NMEA 2000 - Helix NMEA Adapter This NMEA 2000 adapter cable will allow you to connect a HELIX G4N fish finder to drop cable from an existing NMEA 2000 backbone (sold separately).  Compatible with: All HELIX 8/9/10/12/15 G4N Models 1-Year Limited Warranty

Read more less

14 M SILR Y - SOLIX®/APEX® Side Imaging Left-Right Splitter Cable The 14 M ID SILR Y cable allows for two Side Imaging transducers to be connected to into a single sonar input on a Humminbird chartplotter. This y-cable utilizes the two Side Imaging transducer to act as independent port and starboard Side Imaging sonar sources when boat hulls and transducer obstructions require separate transducers for a clear picture on each side of the vessel. This rigging cable provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar® 2D transducer to a Humminbird control head that also has a Side or Down Imaging transducer connected at the same time. This cable supports Transducer ID for automatic recognition and easy setup of Airmar® accessory transducers.Features: Compatible with: All SOLIX and APEX models Combines two Side Imaging transducers together, acting as independent port and starboard Side Imaging sonar sources and can then be connected to a single Humminbird control head. Includes transducer ID for Airmar® accessory transducers when used in combination with 14 M ID SIDB Y (#720111-1) Cable length: 30" (76 cm) 1-Year Limited Warranty

Read more less

14-M360-2DDI-Y - MEGA 360 & 2D/MDI 14-Pin Y-CableThis Y cable allows for the connection of a MEGA 360 Imaging transducer and a 14-pin HW / MDI+ transducer (including Built-in MEGA Imaging) to the same compatible Humminbird fish finder.  Combines MEGA 360 Imaging transducer and 14-pin Dual Spectrum / MEGA Imaging+ transducers (including Built-in MEGA Imaging) into one 14-pin plug for connection to the same, compatible SOLIX fish finder, or HELIX fish finder with additional AD HELIX M360 adapter. For use when connecting a MEGA 360 Imaging transducer to a compatible SOLIX or HELIX fish finder, in conjunction with a Built-in MEGA Imaging transducer or external 14-pin HW /MDI+ transducer. If this cable is being used with a HELIX fish finder, then the #720106-1 AD HELIX M360 adapter must be attached between this y-cable and the HELIX unit, to the single plug end of the Y cable. Compatible with Built-in MEGA Imaging transducers on select Minn Kota trolling motors 30" (76 cm) cable on Dual Sprectrum CHIRP side of cable 10' (3 m) cable on the MEGA 360 side Waterproof, screw-on, 14-pin connectors 1-Year Limited Warranty Specifications: Type: Adapters Box Dimensions: 4"H x 8"W x 9"L WT: 0.95 lbs UPC: 082324054860

Read more less

HCCT Cable Connect Tray for HELIX®The HCCT- HELIX Cable Connector Tray organizes and protects all cables attached to your compatible HELIX unit. Allows for easy attachment or removal of cables when either hooking up or storing your HELIX unit.Features:  Compatible Fish Finders: HELIX 8 Series , HELIX 9 Series, HELIX 10 Series, HELIX 12 Series – All models Connect multiple cable inputs with a single tray. Simple installation for quick removal, storage and security of cables.

Read more less

USB Card Reader with USB-C Adapter CableSave space on your helm with the compact, water-resistant SD™ card reader. It holds two full-size SD cards for quick access to charts, software updates, and ActiveCaptain® data.Featuring a 2-inch x 2-inch footprint, flush mounting, and USB connection to the back of your chartplotter, this card reader easily integrates into a crowded dash or elsewhere at the helm.Specifications: Dimensions (W×H×D): 2" x 2" x 2.4" (excluding the cable) Weight: 4.025 oz Temperature range: -15C to 70C Material: fully gasketed, high-impact plastic, waterproof to IPX7 standards Input power: 4.75V – 5.25V Maximum power usage at 10 Vdc: 2.5 W Typical current draw at 12 Vdc: 100 mA Maximum current draw at 12 Vdc: 500mA Compass-safe distance: 21 inches (533 mm) What's In The Box? Garmin USB card reader USB-C adapter cable Mounting hardware Power cable Documentation

Read more less

LANLink NMEA 2000 To Ethernet GatewayMore and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.*This version ships with an iKonvertNMEA Certified gatewayFeatures: NMEA 2000 to ethernet gateway version The NMEA 2000 version ships with an iKonvertNMEA Certified gateway for easy connection to the NMEA 2000 backbone (easily configurable for multiple installation options) 12/24v DC low power operation Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection Web user interface for easy setup from the connected device via browser TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP Bi-Directional The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS RS232 port for PC apps too Status indicators for power, data in-out, network link, and server status Set-Up: Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port Set up with fixed or dynamic IP address Status page for system diagnostics Specifications: Power: 10-35V DC (Consumption approx. 50mA at 12V DC) Network Port: Ethernet RJ45 10/100MB IP Mode: Static or DHCP Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183) NMEA 2000 option via iKonvertgateway Operating temp: -25 to +70 degrees C LED Indicators: Power -Status -Link -Data In -Data Out Options: RS232 connectivity (non-concurrent with NMEA) Dimensions (W x H): 95mm x 86mm Owner's Manual (pdf)

Read more less

Black Suncover for i50, i60, i70, i70s, p70 & p70s (eS/AXIOM style)Sun covers for your electronics serve a very important purpose. When the equipment is not in use, they prevent UV damage to the screen and face of the unit. They also reduce the likelihood of screen damage and other surface damage. They are also the first defense line if something drops on the screen.Features: Black Raymarine instrument sun cover Protects instruments with square eS-style bezels Applications: Raymarine i50, i60, i70, i70s, p70 and p70s (eS / AXIOM style) *Note: For instruments using the a/c/e style rounded bezels, use A80357

Read more less

0.3M Daisy Chain Cable for Alpha DisplaysDaisy chain up to four Alpha Performance Displays together to create the ultimate data display. Daisy chain cables attach seamlessly to the back of each display.Features: 0.3-meter Daisy Chain Cable  Suitable for both 7” and 9” Alpha Displays Specifications: Type: Cables Box Dimensions: 2"H x 7"W x 11"L WT: 0.3 lbs UPC: 723193842775

Read more less

SeaTalkng to DeviceNet Female Adapter Cable - 1MAdapts SeaTalkng to NMEA2000 network.  Specifications: Type: Adapters Box Dimensions: 1"H x 9"W x 12"L WT: 0.2 lbs UPC: 723193783801

Read more less

Black Retrofit Bezel for i50, i60, i70, p70 & p70RBlack Bezel for Raymarine's i50, i60, i70, p70 and p70R (Spare). Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 5"W x 5"L WT: 0.2 lbs UPC: 723193812341

Read more less