Marine Navigation & Instruments - Accessories

25M Digital Radar Cable w/ Raynet Connector f/HD & Super HD Color Radar Scanners Specifications: Type: Cables Box Dimensions: 3"H x 25"W x 25"L WT: 6.25 lbs UPC: 723193770610

Read more less

TA119 3-up Battery Pack and Seal Kit Specifications: Type: Batteries Box Dimensions: 2"H x 4"W x 5"L WT: 0.15 lbs UPC: 723193703083

Read more less

JCU-4 Premium Joystick Control UnitThe JCU-4 provides pan, tilt, zoom, and confident control of all camera functions. It is our premier joystick controller, equipped with an ergonomic keypad, color LCD, and responsive joystick control. The JCU-4 offers the operator a dedicated tactile camera control and pairs seamlessly with FLIR marine cameras.Features: Rugged, low-profile three-axis joystick for precision camera control in all conditions The 2.9-inch color LCD and keypad simplify camera operation and offer easy access to the joystick setup menus Dimmable LCD and backlit keypad preserve the operator’s vision during nighttime operations Three custom keys for quick access to user-defined camera functions Compatible with the current M232, M300 Series, M400/M400XR and M500 cameras and legacy M-Series, MU/MV Series and Raymarine T-Series cameras Retrofit friendly, the JCU-4 has the same mounting footprint as the JCU-2 and JCU-1 Connectivity options include two Ethernet ports, POE support, and a dedicated DC power connector What's Included? JCU-4 (includes 4 screws and 4 mounting plates pre-fitted) Front cover Weather cover Documentation pack Right-angled RayNet (Ethernet) to RJ45 adapter cable, 3 m (9.84 ft) Right-angled three-pin power cable, 3 m (9.84 ft)

Read more less

Weather Cover for Joystick Control UnitFLIR's Joystick Control Unit Weather cover is a protective covering for the Joystick Control Unit of your maritime thermal imaging camera. It is designed to protect your Joystick Control Unit (JCU) from the dangers of the open ocean. Built specifically for marine use, JCU Weather Cover has been designed by FLIR to guard against salty spray, moisture, and other irritants that could potentially damage your thermal camera's Joystick Control Unit. You should always put this thermal imaging accessory on your JCU when it is not in use to prevent possible damage. Keep it operating smoothly by using the FLIR Weather Cover.Features: Protective covering Protects the electronics of your Joystick Control Unit (JCU) Guards against moisture, salt and other irritants found in marine environments Specifications: Type: Covers Box Dimensions: 1"H x 3"W x 6"L WT: 0.2 lbs UPC: 812462020898

Read more less

Trim Piece Snap Cover for 8x16 SeriesDon't let misplaced or broken trim blemish the beauty of your Garmin glass helm. Use this trim piece snap cover and mount your GPSMAP 8416 or 8616 to your glass helm.

Read more less

GA 38 GPS/GLONASS AntennaBuilt to take advantage of the GLONASS system/constellation of satellites as well as standard GPS, this robust external antenna is packaged in a low-profile waterproof housing and provides 3 easy mounting solutions: pole, surface or under-deck (for the underside of fiberglass decks).External GPS/GLONASS antennas provide increased flexibility and installation options as well as the potential for enhanced reception of GPS/GLONASS signal for those products with built-in GPS/GLONASS antennas.In the Box GA 38 Surface mounting bracket Pole mounting bracket Under-deck mounting bracket Mounting hardware Antenna cable (32 ft/10 m) Installation instructions General Specifications Dimensions (DxH): 3 19/32" x 1 15/18" (91.6 mm x 49.5 mm) Weight: 7.1 oz (201 g) Temperature range: -22° F to 176° F (-30° C to 80° C) Case material: Fully gasketed, high-impact plastic alloy, waterproof to IPX7 WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Antennas Box Dimensions: 7"H x 7"W x 7"L WT: 1.85 lbs UPC: 753759008482

Read more less

Protective Cover for 5" ECHOMAP™ UHD2 ChartplottersGarmin cover to protect your compatible 5" ECHOMAP™ UHD2 from the harsh marine environment when not in use.*Sold as an Individual Specifications: Type: Covers Box Dimensions: 2"H x 6"W x 13"L WT: 0.4 lbs UPC: 753759284725

Read more less

Protective Cover for STRIKER™/Vivid 7" UnitsUse our cover to protect your compatible STRIKER™ from the harsh marine environment when not in use. Specifications: Type: Covers Box Dimensions: 2"H x 7"W x 13"L WT: 0.5 lbs UPC: 753759275617

Read more less

Protective Cover for GPSMAP® 10x2 SeriesProtect your compatible marine device from the sun and scratches when not in use. This protective cover fits snugly over the display to avoid exposure. Compatible Devices: GPSMAP® 1022 GPSMAP® 1022xsv GPSMAP® 1042xsv GPSMAP® 1042xsv WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Covers Box Dimensions: 2"H x 9"W x 14"L WT: 0.5 lbs UPC: 753759172565

Read more less

RayNet(M) to RayNet(M) Cable - 100mmThe RayNet (M) to RayNet (M) Cable Joiner adapter lets you connect two standard RayNet networking cables together in instances where you need to extend the length of a cable run. Data: EthernetLength: 100mm

Read more less

161 1.5" Ball System ArmsFeatures: Engineering-grade nylon and stainless steel construction Compatible with all 1.5″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 1.5″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends 2-1/4” square fixed base For 7-9″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 5"W x 10"L WT: 0.4 lbs UPC: 062017001616

Read more less

Axiom 7 Surface Mount Suncover - 7"Suncover for Axiom 7 when surface mounted out of the box Specifications: Type: Covers Box Dimensions: 1"H x 6"W x 9"L WT: 0.1 lbs UPC: 723193818367

Read more less