Marine Navigation & Instruments - Accessories

Flush Mount Kit f/echoMAP™ Plus 9XsvLooking for a sleeker installation of your compatible marine device? Our flush mount kit allows you to easily position your device against most flat surfaces in your boat. The kit includes hardware, installation instructions and a template.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 0"H x 8"W x 12"L WT: 0.05 lbs UPC: 753759188757

Read more less

USB-C to USB-A Female Adapter CableUse this cable to connect a male USB-A cable to the USB C-port on your compatible GPSMAP® 9000 series chartplotter.

Read more less

SeaTalk1 to USB InterfaceDigital Yacht's SeaTalk to NMEA (ISO) Converter is a small, but powerful interface that provides bi-directional conversion between a SeaTalk network and an NMEA 0183 network or device. Taking its power from the SeaTalk network, the ST-NMEA Converter features a full, multi-transistor SeaTalk 1 interface, an opto-isolated NMEA 0183 input and differential NMEA 0183 output that allows key navigational data to be reliably shared between the SeaTalk and NMEA0183 networks.For developers and advanced users that want to access the raw SeaTalk data, the ST-NMEA converter can also be configured to work in a special “raw data" mode ($STALK) which is gaining support in some Open Source projects.The ST-NMEA (ISO) Converter is ideal for connection to one of Digital Yacht's wireless NMEA servers, allowing SeaTalk owners to go wireless and aUSB Version of the ST-NMEA Converteris also available for direct connection to a PC, Mac or even a Raspberry Pie embedded Linux system.Features: Converts SeaTalk1 to NMEA data Powerful bi-directional converter –also converts NMEA to SeaTalk for use with 3rdparty transducers and sensors Powered from the SeaTalk network –easy red, black and yellow wire colour coding Features reliable multi-stage transistor SeaTalk interface Opto-isolated NMEA0183 input and differential NMEA0183 output Converts all of the key navigational data USB version (for PC & MAC) also available USB variant can also be configured to operate in “Raw Data” mode ($STALK) USB Version - Typical Connections: Connects direct to SeaTalk1 cabling using familiar red, black and yellow wiring Simple plug in USB connection for PC. MAC and Linux Also supports raw data mode for developers Ideal for use with nav programs

Read more less

Right-Angle Power CablePower the GMR Fantom 5x/12x series radars with this 48 foot (15 meters) long 12 AWG cable. When used with the 100 W Fantom series radar, a voltage converter is required.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 3"H x 8"W x 9"L WT: 5.15 lbs UPC: 753759189907

Read more less

EnvironLINK NMEA 2000 Temperature/HumidityAccurate and reliable weather information is essential for every boater.  While the internet provides a plethora of animated forecasts, there’s actually no substitute for localised pressure trend information from an instrument measuring, most importantly, air pressure, but also temperature and humidity information. Rapid changes in barometric pressure are a sure sign of impending weather changes, and as the expression goes, forewarned is forearmed!Digital Yacht’s EnviroLINK device brings traditional barometric pressure, temperature, and humidity monitoring to the digital age with NMEA 2000 connectivity for your multifunction display (MFD) as well as wireless smartphone and tablet connectivity. MFDs are offering more and more capabilities thanks to NMEA 2000 connectivity, so one display on the boat can become an information hub.EnviroLINK is also easy to install, taking power from the boat’s NMEA 2000 network and feeding data to displays. It just needs one simple cable connection. Most modern electronic multi function displays can display this data, but you can also utilise EnviroLINK’s wireless interface with a tablet or phone and display a 10 minute, 24 hour or 48 hour historical analysis.Trends in temperature and humidity are also recorded. Data is collected and stored locally using a precision sensor so there’s no internet connection needed and no proprietary apps require installing. EnviroLINK operates autonomously on your boat providing the best insight to local weather.

Read more less

Quarter Turn Locking CollarRoute cables without having to drill large holes in your vessel with this split connector. Newer Garmin cables do not have the locking collars factory-installed; this allows for easier installation when routing the cables through and behind cabinetry. The two-piece locking collar is attached to the connector.

Read more less

14 M ID SIDB Y - SOLIX®/APEX® Side Imaging & 2D Splitter Cable The 14 M ID SIDB Y cable allows for the installation of a separate 2D transducer paired with a Humminbird MEGA Imaging or non-MEGA Imaging transducer and connect both transducers to a single Humminbird control head. This y-cable provides the ability to install a separate high-speed Humminbird 2D transducer for high-speed depth reading and sonar performance. Alternatively, this cable can also be used to add an accessory Airmar® 2D transducer to a Humminbird control head that also has a Side or Down Imaging transducer connected at the same time. This cable supports Transducer ID for automatic recognition and easy setup of Airmar® accessory transducers.Features: Compatible with: All SOLIX and APEX models Combines a MEGA Side Imaging transducer (or non-MEGA Imaging) and accessory 2D transducer and allows them to be connected to a single Humminbird control head. Automatically provides Side Imaging, Down Imaging and temperature from the standard all-in-one transducer and sources 2D sonar and digital depth from the 2D accessory transducer, without the need to switch data sources manually Includes Transducer ID for Airmar® accessory transducers, which automatically recognizes transducer type for easy installation and setup. Cable length: 30" (76 cm) 1-Year Limited Warranty

Read more less

Combination Power and Data Cable Assembly, 2 MetersWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 2"H x 6"W x 6"L WT: 0.3 lbs

Read more less

Panoptix LiveScope™ Transducer Extension Cable - 30' - 21-PinExtend the length of your compatible LiveScope™ transducer cable. Specifications: Type: Extension Box Dimensions: 3"H x 8"W x 10"L WT: 2.7 lbs UPC: 753759331191

Read more less

Trim Kit for Axiom Pro 12/eS12Raymarine Multifunction Display eS Series and Axiom Pro accessories trim kit. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 7"W x 10"L WT: 0.35 lbs UPC: 723193794449

Read more less

APK™ 10 Autopilot Keyboard - HorizontalGAIN PRECISE CONTROL OF YOUR AUTOPILOTGet easy-to-use control of your Reactor™ 40 autopilot, and put simple, intuitive knob and button activation, heading changes, and more at your fingertips.Rotary KnobThe LED-encircled knob provides precise heading control and colored reference of autopilot status.Autopilot ButtonsDedicated engage and standby buttons make starting and stopping your autopilot easy.Multipurpose ButtonsAdd more autopilot control functions based on your vessel type and setup preferences.Simple InstallationConnect to your NMEA® 2000 network with a single port and cable for integration and power.Compact DesignA low-profile design matches the height of your GHC 50 instrument and GPSMAP® chartplotter. The APK 10 keypad accessory comes in horizontal and vertical mounting options to suit your new or existing helm.In The Box: APK 10 autopilot keypad (horizontal) Backbone/drop cable (2 m) and T-connector for the NMEA 2000® Network Mounting hardware (flush and surface) Documentation Specifications: Dimensions (WxHxD): Flush mount: 5.5” x 2.3” x 0.28” (139.7 x 57.4 x 7.0 mm) Surface mount: 5.5” x 2.3” x 0.65” (140.7 x 58.4 x 16.4 mm) Weight: Horizontal: 4.09 oz (116 g) Temperature range: From 5° to 158°F (from -15° to 70°C) Material: Fully-gasketed, high-impact plastic Water rating: IPX7 Compass-safe distance: 4.5” (114 mm) Powered input: Powered supplied from the NMEA 2000® network

Read more less

Bail Mount with Knobs for GPSMAP® 12x2 SeriesSurface mount your compatible GPSMAP using our bail mount with knobs. The mount tilts for optimum viewing.

Read more less