Marine Navigation & Instruments - Accessories

GPS160 TriNav Sensor with USB OutputThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etcThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.The GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.The GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.Galileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.Features: 72 channel GPS, Glonassand Galileo GNSS positioning receiver Typically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy Can be configured as dedicated GPS, Glonass or Galileo only device Sophisticated anti-spoofing algorithm for robust positioning performance and interference rejection Available in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants GPS160USB also available with USB connection for PC/MAC User/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches Multiple formats of NMEA data output including datum information –user configurable through internal DIP switches Up to 18Hz update rate (user selectable) Ultra low (<20mA) power consumption at 12V DC Input for MOB switch/system –when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter Professional system (ECDIS) support with datum sentence structure (DTM/GBS/GNS/GRS/GSA/GST) Puck installation or fits 3rd party industry standard 1” x 14 TPI threaded mount Brochure (pdf)

Read more less

Power Cable for GMS™ 10Garmin's Power Cable specially for the GMS™ 10 Network Port Expander that allows you to connect multiple chartplotters and sensors over the Garmin Marine Network.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 3"H x 6"W x 6"L WT: 0.5 lbs UPC: 753759046156

Read more less

AS-EC-QDE Ethernet Adapter CableThis Ethernet adapter cable will allow you to use a Humminbird Ethernet cable (sold separately) to network an ethernet-equipped Humminbird fish finder with other compatible fish finders, Ethernet accessories and Minn Kota i-Pilot Link trolling motors.  Compatible with: HELIX 7 G2N & G3N models, all HELIX 8, HELIX 9, HELIX 10, HELIX 12 and HELIX 15 models, 859 models, 899 models, 959 models, 999 models, 1159 models, and 1199 models. Cable Length: 1 foot If you are networking two fish finders from the above list together, it will require two (2) AS EC QDE cables plus one (1) Ethernet cable of the appropriate length for your boat’s needs. 1-Year Limited Warranty WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

LANLink NMEA 0183 To Ethernet GatewayMore and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.Features: NMEA 0183 to ethernet gateway version 12/24v DC low power operation Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection The web user interface for easy setup from the connected device via the browser TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP Bi-Directional The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS RS232 port for PC apps too Status indicators for power, data in-out, network link, and server status Set-Up: Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port Set up with fixed or dynamic IP address Status page for system diagnostics Specifications: Power: 10-35V DC (Consumption approx. 50mA at 12V DC) Network Port: Ethernet RJ45 10/100MB IP Mode: Static or DHCP Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183) NMEA 2000 option via iKonvertgateway Operating temp: -25 to +70 degrees C LED Indicators: Power -Status -Link -Data In -Data Out Options: RS232 connectivity (non-concurrent with NMEA) Dimensions (W x H): 95mm x 86mm

Read more less

LANLink NMEA 2000 To Ethernet GatewayMore and more boats now have a wireless router fitted or utilize services like Digital Yacht 4G Connect for internet connectivity. LANLink is an NMEA to ethernet gateway that enables the boat’s NMEA data to integrate into the router network -allowing connected devices and apps to take advantage of the data.LANLinkis available in two versions suitable for NMEA 0183 and NMEA 2000 respectively. It features an easy-to-use web interface allowing any device with a browser to configure NMEA baud rates and IP/Port information.It can support multiple TCP/IP connections and is bi-directional. Once connected to the onboard network via a simple CAT 5/6 patch cable, users can set apps like TZ iBoat, iNavX, NavLink, iSailor, Imray, Weather 4D, etc., by simply entering the IP address and port for streaming NMEA data.*This version ships with an iKonvertNMEA Certified gatewayFeatures: NMEA 2000 to ethernet gateway version The NMEA 2000 version ships with an iKonvertNMEA Certified gateway for easy connection to the NMEA 2000 backbone (easily configurable for multiple installation options) 12/24v DC low power operation Connects to router or devices via simple RJ45 Cat 5/6 patch cable connection Web user interface for easy setup from the connected device via browser TCP/IP or UDP connection modes –support for up to 5 connected devices with TCP/IP Bi-Directional The NMEA 2000 variant can offer raw mode with encapsulated PGNs or conversion mode (for apps) supporting AIS, instruments, and GPS RS232 port for PC apps too Status indicators for power, data in-out, network link, and server status Set-Up: Easy menu-driven web UI accessible via web browser on a client device with no complicated software to install for setup Configure NMEA data for 4800 or 38400 baud and set mode (TCP/IP or UDP) and port Set up with fixed or dynamic IP address Status page for system diagnostics Specifications: Power: 10-35V DC (Consumption approx. 50mA at 12V DC) Network Port: Ethernet RJ45 10/100MB IP Mode: Static or DHCP Operating Mode *TCP/IP or UDP; Support for up to 5 connected devices in TCP/IP mode; *Recommended mode of operation NMEA Input: Configurable 4800 or 38400 baud (NMEA 0183) NMEA 2000 option via iKonvertgateway Operating temp: -25 to +70 degrees C LED Indicators: Power -Status -Link -Data In -Data Out Options: RS232 connectivity (non-concurrent with NMEA) Dimensions (W x H): 95mm x 86mm Owner's Manual (pdf)

Read more less

Surface Mount Bracket for IRISx106 Series Cameras - White Powder Coat FinishThis surface-mount bracket facilitates installation directly onto a bulkhead and is often used when installing in engine rooms where it is not possible to recess-mount the device.Features:White powder coat finish Specifications: Type: Mounting Brackets Box Dimensions: 5"H x 8"W x 8"L WT: 2.9 lbs

Read more less

Gobius C External Fluid Level Sensor/Tank MonitorPlug and play installation. No disassembly of the tank is needed. Measures from the top, never a risk of leakage. Complete system, everything included; sensor, cable, 3M cleaning wipe, and an extra 3M sensor tape. Handles voltage of 12-24 Volts. The sensor is mounted in the same simple way as other Gobius products but on the top of the tank. Max. tank depth is 2 meters. Can be connected to control systems and analog instruments such as KUS, VDO, WEMA, and Faria (10-190 Ohm, 240-33 Ohm, 4-20 mA, and 0-5 V). In addition, there is two individual on/off outputs to signal when the tank is empty and full. Installation is done from your phone via Bluetooth. The app is available in English, French, German, Italian, Spanish, and Swedish. Features: Suitable for all types of liquids Plug-and-play installation All settings are done automatically Built-in Tank Calculator Built-in wave motion reduction No need for removing the tank Reading through plastic tank No tank wall thickness limit Adapted for standard holes in metal tanks (1,25″ SAE 5) No cleaning inside the tank is needed No maintenance Measurement Functions: Measuring range, 0-2000 mm Measuring interval, 1 second Resolution: 1 mm Accuracy: +/- 2-3 mm  Tank Geometries: Rectangular, Irregular, Vertical Cylindric, Horizontal Cylindric Specifications: The input voltage, 9-28 V DC Connector, Female 8 pins Two digital outputs (level alarms) 4-20 mA (galvanically insulated) Outputs, 10-180 & 240-33 Ohm Output, 0-5 V Sensor LED shows active/measuring Input voltage, 9-28 V DC Power consumption, 10 mA Built-in Bluetooth, version 5.0 Built-in temperature sensor Built-in accelerometer Built-in micro radar sensor Max voltage: 30 V Max current: 500 mA Bluetooth turns off Sensor Facts: Weight, 65 gram Dimensions, high 65 mm, width 95 mm Sensor height incl adapter metal tank, 75 mm Cable length, 1 m Connector on the sensor Sensor material, ABS Color, silver Bluetooth, version 5.0 Waterproof (IP44) Software: App for iOS, Android phones, and Windows PC Installation / change / removal Correct level calculation, incl (% and liters) Bluetooth, version 5.0 Turn on/off Bluetooth Two digital outputs, four states Display on the phone Built-in test functions Built-in support function Brochure (pdf)

Read more less

Gobius Pro 1 External Fluid Level SensorInstall, make settings, and see the results on your smartphone. Free App for iPhone and Android phones included. You can use Gobius Pro for all liquids and tank materials. 12 – 24 Volts. Choose water, fuel, waste, or other fluids. You can have max 9 sensors/tank. Features: Measuring from the outside of the tank, nothing on the inside Bluetooth and App for your phone included Works with the following tank materials: Stainless steel, max 3 mm Steel, max 3 mm Aluminum, max 5 mm Polyethelene,  max 12 mm Fiber Glass, max 8 mm

Read more less

Quarter Turn Locking CollarRoute cables without having to drill large holes in your vessel with this split connector. Newer Garmin cables do not have the locking collars factory-installed; this allows for easier installation when routing the cables through and behind cabinetry. The two-piece locking collar is attached to the connector.

Read more less

ICE Adapter Kit - MEGA LiveThe MEGA Live ICE Adapter includes all the components needed to convert a MEGA Live Imaging transducer for use while ICE fishing. Features: Compatible with: MEGA Live Imaging Multi-piece pole breaks down into three sections for varying ice depths and a more compact footprint for storage. What’s Included: Shaft, 10" base, handle, adjustable depth collar, and custom power and ethernet cables 1-Year Limited Warranty

Read more less

HELIX ICE Conversion Kit - MEGA LiveThe MEGA Live Conversion Kit includes everything you need to convert your HELIX 8, 9, or 10 G3N/G4N with MEGA Imaging for ICE fishing. Watch fish, structure, and your lure in real-time, powered by the unmatched detail of MEGA Imaging®. And take advantage of crystal-clear Dual Spectrum CHIRP Sonar with 3/4" target separation and CHIRP Interference Rejection. Additional features designed specifically for the ICE angler include a premium shuttle and 20Ah lithium battery. Features: MEGA Live Imaging: See fish, bait, and structure in real-time with no gaps in sonar coverage, powered by the unmatched detail and clarity of MEGA Imaging® throughout the entire sonar view. Premium Shuttle: It has it all. Master power switch, quick-connect SAE power cables, large handle, multiple ¼"-20 mounting options for accessories, two-rod holders, cable and transducer management, and a battery cover. Multi-piece pole breaks down into three sections for varying ice depths and a more compact footprint for storage. Compatible with: HELIX 8, 9, and 10 G3N/G4N with MEGA Imaging What’s Included: MEGA Live transducer, MEGA Live ICE Adapter Kit, Dual Spectrum CHIRP ICE transducer, 20Ah lithium battery with 2 USB ports and battery life indicator, charger, ICE shuttle, hardware, and quick-connect SAE power cables 2-Year Limited Warranty

Read more less

Open Water Adapter Kit - MEGA LiveThe adapter kit includes all accessories needed to convert the MEGA Live Imaging™ transducer for use on a boat. Features: What's Included: Shaft clamp, and all required cables (transducer and shaft sold separately). Compatible with: MEGA Live Imaging Transducer, Minn Kota® Ultrex™, and Minn Kota ® Fortrex®

Read more less