Marine Navigation & Instruments - Accessories

SeaTalk Interconnect Cable, 3ft. (1m)SeaTalk Interconnect cable for linking SeaTalk devicesSeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin molded connectors on each end.

Read more less

iKonvert with USB InterfaceThe iKonvert NMEA2000-0183 Gateway/Converter is an intelligent and flexible gateway for allowing software applications to read/write NMEA2000 data, either as RAW binary PGN data for ultimate analysis and control or converted to the older and more commonly supported NMEA0183 data.Every popular Marine Navigation application that runs on PC/MAC/LINUX computers, can read NMEA0183 data and for all of those programs, iKonvert provides a simple, reliable and cost effective way to access the navigation data on an NMEA2000 network. Simply set the DIP switches inside iKonvert to the required data mode that you want to use and iKonvert will extract the selected data from the NMEA2000 network and provide them to your marine application in a format and at a baud rate they support.For developers creating new applications or who know how to decode NMEA2000 PGNs, iKonvert can be easily set to its “RAW Mode” where data can be read/written to using a simple serial data format that we publish on our iKonvert Github site. No special libraries or proprietary code are required to integrate iKonvert, which has attracted the interest of a number of developers and it is already compatible with CanBoat and the popular Signal K Node Server.Digital Yacht’s iKonvert Gateway is housed in a compact and easy to mount housing, with an integral USB cable and standard NMEA2000 Micro drop cable (male).  Taking its power from the NMEA2000 network, and providing full galvanic isolation between the USB interface and NMEA2000 network, iKonvert operates at a baud rate of 230KB in “RAW mode” and 4.8KB, 38.4KB or 115KB in NMEA0183 conversion modes. All modes can be simply selected using the internal DIP switches with no special configuration software or firmware changes required.iKonvert’s USB interface features an FTDI chip that has the most reliable and compatible USB drivers for all of the popular operating systems (Windows/Mac/LINUX/Android), whilst an ISO Version of iKonvert will soon be released for direct connection between NMEA2000 and NMEA0183 systems.Features: Small but powerful bi-directional NMEA2000 Gateway/Converter Powered from the NMEA2000 network High Speed USB 2.0 USB Interface (FTDI) Compatible with Windows, OSX, LINUX and Android Can be configured to operate in “Raw Mode” (Binary PGN data) Converts all of the key navigational data Integral USB (Type A) and NMEA2000 Micro (Male) cables Simple configuration of data modes using DIP switches Full galvanic isolation

Read more less

ST-Ng Right Angle AdapterThis is a 90°, right angle spur connector. Used for the multifunction displays.

Read more less

E120 Classic To Axiom Pro 12 Adapter PlatePowder coated black to match the Axiom, this adapter plate is designed to enable a simple and stylish installation of Axiom Pro 12" multifunction displays in place of a E120 Classic Display. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 13"W x 16"L WT: 1.05 lbs UPC: 723193824962

Read more less

Bail Mount with Knobs Use our replacement bail mount with knobs to surface mount your GPSMAP® device.Compatible Devices:GPSMAP® 720GPSMAP® 720sGPSMAP® 740GPSMAP® 740sWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 5"W x 9"L WT: 0.33 lbs UPC: 753759102456

Read more less

RayNet Cable Pullers - 5 PackRaymarine's Cable Pullers securely attach to the twist-lock plug on RayNet networking cables and provide a convenient, center-mounted attachment point for your pull string. The cable puller protects the connector's internal pins from damage, acts as a fairing to make pulls through tight spaces easier, and prevents crush/bend damage to the cable/connector joint. The cable pullers are reusable, and come in packages of 5 pullers.

Read more less

175 2.25" Ball System Top Plate for 10-12" ScreensFeatures: Engineering-grade nylon and Stainless steel construction Compatible with all 2.25″ Scotty ball system accessories The multi-hole top plate fits most popular electronics brands UV-resistant engineering-grade nylon construction Corrosion-resistant stainless steel hardware 2.25″ ball joints allow for 360 degrees of rotation and 180 degrees of tilt at both ends For 10-12″ fish finders Holds your device securely in extreme conditions Easy grip T-knob for loosening or tightening Designed for 1/4” fasteners (sold separately) Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 5"W x 15"L WT: 0.85 lbs UPC: 062017001753

Read more less

5M RayNet to RayNet Cable for e & c Series

Read more less

SCU-38 Passive GPS AntennaThe Standard Horizon SCU-38 external receiver allows your compatible Standard Horizon radios internal GPS receiver to operate even when mounted in an area where the internal GPS cannot receive a signal. Simply connect the SCU-38 and mount the antenna where it has a clear view of the sky. Cable measures 5M long.The SCU-38 is compatible with the following Standard Horizon radios: GX1400G, GX1800G, GX1850G, and GX2400 *Please note that the SCU-38 is a passive antenna and will only work with units already equipped with a built-in GPS receiver.

Read more less

Power Cable - 8-PinPower and connect your compatible GPSMAP® device with this 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.Compatible Devices: echoMAP™ Series GPSMAP® Series WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Power Cords Box Dimensions: 1"H x 5"W x 5"L WT: 0.4 lbs UPC: 753759998394

Read more less

RMK-10 System Remote Control - Portrait & Landscape KeypadRaymarine's RMK-10 Remote Keypad is an ultra-compact wired keypad accessory that provides full control of aSeries, cSeries, eSeries, eS Series and gS Series Multifunction Displays (MFDs) from any mounting location. The fully backlit RMK-10 includes dedicated keys for home, menu, zoom in/out, window control, waypoint management, power/brightness, as well as Evolution autopilot control.RMK-10 also features the same multifunction rotary controller with the integrated cursor pad found on eS Series multifunction displaysThe RMK-10 can be surface-mounted or flush-mounted, and is available with key mats for horizontal or vertical installation. This gives you the flexibility to install the RMK-10 just about anywhere.RMK-10 Mounting OptionsThe RMK-10 is the perfect solution for controlling MFD’s mounted beyond arm’s reach, or in overhead electronics boxes. Instead of reaching for the MFD, the RMK-10 brings the system’s controls to you.For the ultimate in convenience, mount the RMK-10 in the arm of your favorite helm chair. Now it’s easy to sit back, relax and enjoy the ride on autopilot, while still being able to interact with your navigation system.RMK-10 is also great for bringing remote system control to secondary monitors and onboard LCD TV sets connected to the VGA or HDMI output of select e-Series, eS-Series and gS-Series displays. Now you can see and control your Raymarine navigation system from a below-deck navigation table, salon or stateroom.Networking & ControlUtilizing Raymarine’s RayNet high speed networking, the RMK-10 can be setup to control a single multifunction display, or multiple displays mounted at the same location. When controlling multiple displays on the same helm, the RMK-10 provides seamless control across all of the displays.When used with aSeries or gS Series Multitouch displays, the RMK-10 brings full HybridTouch™ control capability to these products. The RMK-10 integrates seamlessly with the LightHouse II user interface and allows the navigation system to be operated solely by touch, by keypad, or any variation between.

Read more less

RayStar 150 GPS Sensor w/Pole MountRS150 GPS SensorThe RS150 GPS is a high performance, 72-channel, remotely mounted GPS sensor for Raymarine navigation systems. The RS150 offers fast 10Hz position updates and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system.Features: 72-channel GPS receiver Fast 10Hz position updates Satellite differential GPS-compatible. Space-Based Augmentation System (SBAS) enabled with WASS, EGNOS, MSAS and GAGAN support A GNSS receiver with GLONASS compatibility Low power consumption: 30mA (1 LEN) SeaTalkng and NMEA2000 compatible (using a device net adapter cable) Designed for low profile surface mounting or optional pole mounting Specifications: Nominal supply voltage: 12V D.C. Powered by N2K bus Operating voltage range: 8 - 32V DC Power consumption: 30 mA max (NMEA LEN = 1) Operating temperature: -13ºF to 131ºF (-25ºC to +55ºC) Relative humidity: max 93% Waterproof: IPx6/7 Supported connection protocols: SeaTalkng: NMEA 2000 (certified) (via DeviceNet adaptor) Sensitivity: High sensitivity - acquisition down to -163dBm No. of channels: 72 Positioning System: GPS & GLONASS Satellite Differential Type: WAAS (United States); EGNOS (Europe); MSAS (Japan); GAGAN (India) Differential acquisition: Automatic Position accuracy (95%): <15M Position accuracy with SDGPS (95%): <5M Speed accuracy (95%): <0.3kt Time to first fix from cold start: <2 minutes (< 45 seconds typical) Time to first fix from hot start: < 8 seconds -72 hour hold up battery allows for hot start Geodetic Datum: WGS84 Pole Mount for RS150 GPS AntennaRaymarine's Pole Mount specifically for the RS150 GPS Antenna. The RS150 has 72 channels and offers faster 10Hz performance and enhanced accuracy. The RS150 is also a GNSS receiver and supports the GLONASS global navigation satellite system. Specifications: Type: Antennas Box Dimensions: 8"H x 9"W x 12"L WT: 2.6 lbs UPC: 723193853726

Read more less