Marine Navigation & Instruments - Gauge Accessories

ALAS Adjustable Fuel Sender - 6 to 3/4-23" - 10-184 OhmVDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh. These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm.  For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low. Features: Connection - M4 Stud Voltage: 6-24V *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Gold Box Dimensions: 4"H x 4"W x 19"L WT: 1.3 lbs UPC: 754059001036

Read more less

Temp Sender - 1/2" American Single StandardFeatures: The universal sending unit for most gauges and instruments Temp Sender, 1/2" American Single Standard This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Temperature Sender 1/8" NPTF Cylinder Head TempFeatures: Temperature Sender 1/8" NPTF NPTF Cylinder Head This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

LinkUp Intelligent Battery Sensor Gateway - 12V - 500AHEasily installed LinkUp gateway modules replace the original wiring, delivering power to the LinkUp device and sensor from the NMEA 2000 backbone while still compliant with the NMEA 2000 certification. Thanks to their passive wireless receiver, the configuration is done in a snap using your mobile device, and the LinkUp Configurator app is available for Android and iOS devices. The sensor parameters are configured to type, instance, and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.Features: NMEA 2000® certified Wireless configuration through companion mobile App Status LED Plug-and-Play installation and configuration Specifications: Operating voltage - 6-18V Permanent load current - ±200A Maximum current - ±1500A Maximum battery capacity - 500Ah Threaded GND bolt - M6 Power consumption - ≤ 15 mA (normal mode) Output signal - NMEA 2000® Dimensions - 125mm x 32mm (+cables) Protection class - IP X9/K (LinkUp) IP6K7 (Sensor) Operating temperature - -40°C to +115 °C Flammability - UL94 Housing material - PC-FR Compliance - CE, UKCA, Reach, RoHS, ISO8846:1990 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Pressure Sender 150 PSI - 1/8-27 NPT Features: Ground - Standard Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - 29/12 Max. Pressure  - 150 PSI / 10 bar (10-180Ohm)  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

Reed Switch Fuel Sender - 450 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 17.7" (450mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 19"L WT: 0.8 lbs UPC: 754059064451

Read more less

Pressure Sender 80 PSI - 1/8-27 NPTFFeatures: Ground - Standard Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - 29/4 Max. Pressure Range - 80PSI / 5 bar (10-180Ohm) *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 2"H x 5"W x 8"L WT: 0.38 lbs UPC: 754059004655

Read more less

Sender Fuel Level (American 8"-16") (Single)Features: 8 to 16 in. Fuel Level Sending Unit 8 in. to 16 in. tank depth Single station For use with US OHM scale gauges This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Pitot Kit - UniversalComplete transom mount speedometer pick-up with escutcheon plate and mounting hardware for use with all marine pressure- driven speedometers.*Sold without tubing.Factory P/N KS9007*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Gauge Type: Speedometer Voltage - Input Range (Volts): N/A Box Set: No Box Dimensions: 2"H x 3"W x 7"L WT: 0.2 lbs UPC: 759266911093

Read more less

Sender Temperature 1/8 - European Single StandardThe Faria Beede single-station standard earth temperature sender is European resistance and suitable for use with the European range of Faria Beede oil temperature and water temperature gauges. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Exhuast Gas Temperature Probe (0°C to 900°C or 32° to 1652°F)WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

2" Gauge Weather Cover - Black *3-PackProtect your gauges from fading, scratches, and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it.Compatible with all Faria 2" Gauges.Available in 2", 4" or 5" size and in Black or White.*Sold as a Three (3) PackThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Diameter (Inches): 2 Color: Black Diameter (mm): 51 Box Dimensions: 1"H x 2"W x 3"L WT: 0.3 lbs Quick Guide (pdf)

Read more less