Marine Navigation & Instruments - Gauge Accessories

LinkUp J1939 to NMEA 2000 GatewayThis single-sensor gateway is designed to upgrade your vessel sensors to NMEA 2000®. Can be easily configured through either the embedded wireless interface or NMEA 2000® by means of our Configuration Tool. The ISO 8846:1990 compliance completes the devices by allowing their installation into compartments.Features: Waterproof sensor connection No external power supply required Wireless configuration through companion mobile App Explosion-proof housing body for engine room installation Standard DeviceNet M12 plug to interface NMEA 2000 Input signal - SAE J1939 Nominal Voltage - 12V *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Box Dimensions: 1"H x 7"W x 10"L WT: 0.14 lbs UPC: 7640178729513 Owner's Manual (pdf)Brochure (pdf)

Read more less

Oil Pressure Sensor - 1/8"-27NPT Thread - 5 Bar Veratron’s Pressure Sensors deliver a stable quality reading during a long lifespan. They have excellent anti-vibration performance and a wide operating temperature range.The sensors can be used in a wide range of applications.All sensors come with a sensor output and an insulated ground pin.Features: Function - Engine oil pressure, transmission oil pressure Thread - 1/8"-27NPT Calibration - 10-184 Ohm Measurement Range - 5 bar Output Signals - Resistive Wide Operating Range - -25 to 120°C Insulated ground pin Quick Guide (pdf)

Read more less

ALAS Adjustable Fuel Sender - 6 to 3/4-23" - 10-184 OhmVDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh. These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm.  For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low. Features: Connection - M4 Stud Voltage: 6-24V *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Gold Box Dimensions: 4"H x 4"W x 19"L WT: 1.3 lbs UPC: 754059001036

Read more less

Pressure Sender 80 PSI Features: Ground - Standard Connection - 10-32 Stud Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - AT84200 Max. Pressure Range - 80PSI / 5 bar (240-33Ohm) *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 1"H x 5"W x 8"L WT: 0.3 lbs UPC: 754059005003

Read more less

Reed Switch Fuel Sender - 800 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 31.5" (800mm)  Insulated 1/4" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 36"L WT: 1.2 lbs UPC: 754059064482

Read more less

Engine Oil Temperature Sensor - 3/8"-18NPT Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - 3/8"-18NPT Calibration - 150°C Measurement Range - 150°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less

Reed Switch Fuel Sender - 450 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 17.7" (450mm)  Insulated 1/4"" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 19"L WT: 0.8 lbs UPC: 754059064451

Read more less

Sender 3/4 16 x 2-1/4 (Magnetic Sensor)Features: 3/4 16 x 2-1/4 No Harness *Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Box Dimensions: 1"H x 1"W x 4"L WT: 0.2 lbs

Read more less

Pitot Kit - UniversalComplete transom mount speedometer pick-up with escutcheon plate and mounting hardware for use with all marine pressure- driven speedometers.*Sold without tubing.Factory P/N KS9007*Sold as an IndividualThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Color: Black Gauge Type: Speedometer Voltage - Input Range (Volts): N/A Box Set: No Box Dimensions: 2"H x 3"W x 7"L WT: 0.2 lbs UPC: 759266911093

Read more less

Pressure Sender 80 PSI Floating Ground - 1/8-27 NPT Features: Ground - Floating Connection - Knurled Nut Voltage - 6-24V Thread - 1/8-27 NPTF Component Reference No. - 32/1 Max. Pressure Range -80 PSI / 5 bar (10-180Ohm) *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 1"H x 5"W x 8"L WT: 0.3 lbs UPC: 754059004921

Read more less

Reed Switch Fuel Sender - 330 MMMost aftermarket fuel senders use a rotating float arm and resistance cards to measure the amount of fuel in a tank which can lead to erratic pointer movements.  This revolutionary design comes with many benefits!  This is ideal for applications where a conventional swing arm will not fit due to clearance issues.  The tubular design acts as a dampener to prevent the gauge pointer from moving due to fuel slosh.  The floatless fuel sender has no side to side motion, which means it has no moving parts to wear out.  It is top mounted and utilizes the aftermarket standard SAE 5 hole mounting flange and comes complete with neoprene gasket and mounting hardware. Features: Stainless steel construction Ethanol resistant Viton gasket 240-33 Ohm range Fits tanks with a depth of 12.9" (330mm)  Insulated 1/4" spade connectors Standard 5 hole mounting flange Works with most standard marine fuel gauges Ground - Floating Connection - Insulated .25" Spade  *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 3"H x 3"W x 14"L WT: 0.6 lbs UPC: 754059064420

Read more less

Heavy Duty Normally Open/Normally Closed – Dual Circuit 4 PSI Pressure SwitchFeatures: Ground - Floating Connection - # 8-32 Voltage - 6-24V Circuit - Normally Closed/Open - Dual Contacts - Silver Alloy Max. Pressure Range - 4 PSI Terminals - 3 *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Silver Box Dimensions: 1"H x 5"W x 8"L WT: 0.3 lbs UPC: 754059008189

Read more less