Marine Navigation & Instruments - NMEA Cables & Sensors

Devicenet Female ADP Cable - SeaTalkng - NMEA 2000Adapts SeaTalkng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems.Female: 15.7" (0.4m) Specifications: Connection Gender: Female Box Dimensions: 1"H x 4"W x 7"L WT: 0.3 lbs UPC: 723193060452

Read more less

Evolution Cabling Kit - R70160 The Evolution SeaTalkng cable kit contains: 1 x SeaTalkng Power Cable (0.4m)t 1 x SeaTalkng Backbone Cable (5m)t 1 x SeaTalkng Spur Cable (0.4m)t 1 x SeaTalkng 5-way Connector Block 2 x SeaTalkng T-piece Connectort 2 x SeaTalkng Terminator

Read more less

Blanking Plug f/SeaTalk ngThis blanking plug is a blanking plug for the SeaTalkng. Place blanking plug in unused SeaTalkNG Spur sockets to protect them.

Read more less

Raymarine In-Line TerminatorIn-Line SeaTalkng Terminator f/Long Cable Runsold part number a80001 , now its a06074

Read more less

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Specifications: Cable Length (Feet): 66' Data Interface: NMEA 2000 Box Dimensions: 2"H x 8"W x 9"L WT: 2 lbs UPC: 723193060377

Read more less

DST810 Plastic Smart Sensor 235kHz - NMEA 2000 - BluetoothDepth, Speed-Through-Water, Water Temperature, Boat AttitudeFor a product to be considered a “breakthrough,” it has to vastly change conventional behavior and enhance abilities. The  DST810 Smart Multisensor, featuring the new Gen2 paddlewheel together with Airmar's CAST™ App, is the convergence of advanced hull data, matched with a simple and reliable way to calibrate accurate speed via a wireless device. This changes how boaters receive and deliver information to get greater performance from their hull. It is a simple, consistent way to calibrate speed-through-water regardless of what display system is on board. The DST810 and Airmar CAST App deliver capabilities that until now, were only available through expensive PC-based software.Besides water temperature, depth, and upgraded 5 Hz (5X per second) speed-through-water output, the DST810 features an integrated attitude sensor for heel and trim data. This information, combined with Airmar’s powerful and simple CAST App, makes heel-compensated speed calibration across multiple heel angles and speed ranges both fast and intuitive and is independent of the onboard instruments.All speed calibrations and NMEA configurations are stored in the DST810 sensor—not in the displays.Features 5 Hz speed output (5X per second) for visibly smoother speed-through-water reporting and faster data for better decision making Integrated attitude sensor for heel and trim benefits sailing and powerboats. Simple attitude calibration to correct for off-center mounting Hull Deadrise: Up to 22° Depth Frequency: 235 kHz Minimum Depth Range: 0.5 m (1.6') Maximum Depth Range: Up to 100 m (330')—NMEA 2000® Speed Range: Up to 45 knots Wireless Protocol: Bluetooth Low Energy (BLE) Wireless Range: Up to 30 feet depending on mount location Standard Cable Length: 6 m (20') DeviceNet—NMEA 2000® Temperature Sensor Accuracy: ±0.5°C (±1.8°F) Temperature Sensor Range: -10°C to 40°C (14°F to 104°F) Supply Voltage: 9 VDC to 16 VDC—per NMEA 2000 Wireless connectivity to Airmar's CAST App has user-friendly benefits: Calibrate the DST810 is a simple, intuitive way regardless of the instrument brand or model that is on board Conduct basic and advanced heel-compensated speed calibrations for improved speed-through-water outputs across the speed range Advanced Speed Calibration allows for manual speed entries for multiple heel angles and up to 10 speeds, formerly only possible through expensive PC software Enable and disable PGN’s and set offset and output rates The Perfect Sensor for Every UseSAILING 5 Hz speed output for visibly smoother speed data. Incredibly easy calibration via Airmar's CAST App. Wirelessly connect, calibrate speed, and configure data. DST810 stores configurations and delivers data to the NMEA 2000® network. Depth, heel-corrected speed-through-water, heel and trim, and water temperature from one installed multisensor. POWERBOATS 5 Hz speed, depth, pitch and roll, and water temperature from one installed instrument. Simple depth offsets and corrected speed-through-water via Airmar's CAST™ App. Popular depth sensor for shallow-water performance. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Specifications: Cable Length (Feet): 20ft Chirp: No Connection Gender: Male Data Interface: NMEA 2000 Mounting Style: Thru-Hull Pins: 5 Speed Included: Yes Temperature: Yes Box Dimensions: 4"H x 8"W x 10"L WT: 2.1 lbs UPC: 801769018677

Read more less

AXIOM Power Cable 1.5M Right Angle & NMEA 2000 ConnectorFeatures: AXIOM Power Cable 1.5M Right Angle NMEA 2000 Connector 90° Specifications: Cable Length (Feet): 5' Data Interface: NMEA 2000 Box Dimensions: 1"H x 7"W x 7"L WT: 0.5 lbs UPC: 723193819210

Read more less

SeaTalkng Terminators attach at each end of SeaTalk backbone. Two are required per system.

Read more less

Devicenet Male ADP Cable SeaTalkng to NMEA 2000Adapts SeaTalkng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 systems.Male: 1.5M cable Specifications: Connection Gender: Male Box Dimensions: 1"H x 6"W x 6"L WT: 0.2 lbs UPC: 723193060469

Read more less

NMEA 2000 T-Connector - MaleThis NMEA 2000 T-connector offers connection between NMEA 2000 drop cables and backbone cables. The couplers connect to the corresponding T-connectors and backbone cables, creating a simplified installation. Features: Includes (1) NMEA 2000 T-connector 1-Year Limited Warranty

Read more less

NMEA Adapter f/PCThe USB to NMEA Serial Adaptor cable is a simple and effective method for connecting NMEA 0183 compatible marine equipment to a PC. Each cable contains a small internal electronic circuit board, housed in the USB connector. This circuitry provides full bi-directional conversion of the serial data and also includes Tx and Rx LEDs which give a visual indication of data traffic on the cable. The other end of the cable is bare, tinned wire ended connections which can be quickly connected to the NMEA 0183 compatible equipment with suitable connector block or terminals. The cable is FCC, CE and RoHS compliant. The USB side of the cable is USB powered and USB 2.0 full speed compatible. Each cable is 1.8m long and supports a data transfer rate up to 1 Mbaud. Drivers are available for WinXP, Vista, Win7, LINUX and Mac OS X. Quick Guide (pdf)

Read more less

Micro/Mid Powertap Tee - FM (left)/5 Meter 4 Wire Power drop (bottom)/FM (right) Specifications: Cable Length (Feet): 16' Connection Gender: Female Box Dimensions: 1"H x 8"W x 8"L WT: 0.2 lbs UPC: 873804002477

Read more less