Marine Navigation & Instruments - NMEA Cables & Sensors

Micro Field-Attachable ConnectorField-attachable connectors allows you to make field connections to bulk cable. The color-coded screw terminals match the individual wire colors found within the bulk cable for error-free field installation.Color-coded screw terminals make for error-free field installation Rugged housing material designed to withstand harsh marine environments Specifications: Connection Gender: Male Box Dimensions: 2"H x 2"W x 2"L WT: 0.5 lbs UPC: 873804001692

Read more less

The TLM150 is used to sense levels of gasoline tanks using ultrasonic technology and transmit the gasoline levels over the NMEA 2000 network. This allows you to observe gasoline tank levels anywhere on the vessel where there is an NMEA 2000 compatible display such as the Maretron DSM250. The TLM150 is capable of sensing gasoline tanks up to 24" in depth. Unlike most tank senders that only work with rectangular tanks, the TLM150 can be calibrated for irregular tank shapes so you can know the true level of your tanks. It is desigend to operate within the harsh demands of the marine environment.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Maretron NM-NM Mini Gender Changer, Male to MaleMaretron cables have a male connector on one end and a female connector on the other end. Normally, the male connector points back towards the network power supply, but on some occasions, this gets reversed and a gender changer can be used to get back to the desired connector type.Waterproof seals for reliable connections Easily swap connector gender to get back to desired connector type Specifications: Connection Gender: Male-Male Box Dimensions: 1"H x 2"W x 3"L WT: 0.25 lbs UPC: 873804002392

Read more less

Micro Inline Termination ResistorThe inline terminator is used where the NMEA 2000® network is terminated at a product, for example the top of the mast at a weather instrument or GPS antenna/receiver. The inline terminator plugs directly into the product with the other end connected to the network cableMicro Termination resistors usually terminate the network by plugging into a tee. The inline terminator doesn't require a tee and easily fits within an instrument's mounting pipe where a tee wouldn't Rugged, IP-68 rated connectors (submersible) for continued connection integrity in marine environment

Read more less

NMEA 2000 Starter Cable KitNearly every new marine electronics product has an NMEA2000 interface now, but it is still “black magic” to many boat owners and even fairly technical users struggle to understand NMEA2000 and what is needed to make products work correctly together.With Digtial Yacht's large range of AIS, often the first add-on device to make a boat owner think about NMEA2000, we are regularly asked “what do I need to make it work?” This prompted Digital Yacht to create a cost effective and smart NMEA2000 Starter Kit that is ideal for smaller boats but can also be easily expanded in the future.There are other starter kits on the market, but none offer three device connection, metal connectors and a smart 4-Way T-Piece at such a good price.By utilizing the NMEA2000 standard “Micro C” type connectors, users can easily add and expand to this Starter Kit as their installation grows or simply buy two or more kits for a larger install, still cheaper than buying the parts separately.Features: Everything you need in one box Smart 4-Way T-Piece “Backbone” 1M (3') Power Cable with in-line fuse 1M (3') “Drop Cable” Pair of removable network terminators Allows three devices to be connected Standard “Micro C” connectors make it very easy for future network expansion Metal connectors and reduced T-Piece connections, improve reliability Specifications: Data Interface: NMEA 2000 Box Dimensions: 2"H x 6"W x 7"L WT: 0.6 lbs UPC: 081159830670

Read more less

NMEA 2000 right angle cableWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 6' Data Interface: NMEA 2000 Box Dimensions: 1"H x 4"W x 5"L WT: 0.4 lbs UPC: 753759078270

Read more less

NMEA 2000 3M Drop CableThis Digital Yacht cable is a 3m (9ft) NMEA 2000 drop cable made of metal connectors for maximum reliability. The drop cable allows users to expand the NMEA 2000 to whatever size is needed.*Digital Yacht “Drop Cables” can also be used as backbone cables and are easily connected to make any length of backbone cable required. Also, the total length of all drop cables must be less than 76m.Features: 3m (9ft) NMEA 2000 Drop Cable Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating IP68 Specifications: Cable Length (Feet): 9' Box Dimensions: 1"H x 6"W x 8"L WT: 0.4 lbs UPC: 703791696345 Quick Guide (pdf)

Read more less

Micro Bulk Cable Single Piece - 100M SpoolMicro bulk cable is primarily used as drop cable, but it can also be used as the trunk line depending on network power requirements. Bulk cable with field-attachable connectors allows for maximum flexibility as cables can be made on the job to exact lengths.Features: Single Piece 100M Spool Length Trunk of drop cable for use with Micro Connectors Used with field attachable connectors to build exact length cables at the job site Specifications: Cable Length (Feet): 328' Box Dimensions: 12"H x 12"W x 12"L WT: 17.6 lbs UPC: 087380400309

Read more less

IPG100 (Internet Protocol Gateway) lets you connect Maretron black boxes (MBB100's), Maretron touch screens (DSM800's), PC's, Mac's, tablets, or smartphones to an NMEA 2000 network so you can monitor and control your vessel using Maretron's N2KViewr software. The conventional way of viewing NMEA 2000 information is with a display on the vessel that is directly connected to an NMEA 2000 network, but with the IPG100, you are not limited to direct connected displays. With the IPG100, you can use any device running N2KViewr software to monitor and control your vessel from onboard or ashore.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less

NMEA 2000 90° Elbow ConnectorAncor's NMEA 2000 Approved 90 degree elbow makes cable routing easier. The connector is installed between two cables to reduce stress on the cables and create a compact installation.Features: Color coded for easy installation and component identification NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 Box Dimensions: 2"H x 3"W x 5"L WT: 0.2 lbs UPC: 091887982336 Brochure (pdf)

Read more less

NMEA 2000 Backbone Cable - 5MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone cables are available in four lengths from 0.5 meter (1.6 feet) to 10 meters (32.8 feet) to cover a wide variety of applications.Features: Color coded for easy installation and component identification Large 18 AWG power conductors to reduce voltage drop and provide better reliability for critical backbone cables NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 16' Data Interface: NMEA 2000 Box Dimensions: 3"H x 7"W x 8"L WT: 1.4 lbs UPC: 091887982244 Brochure (pdf)

Read more less

GPS160F with Furuno Format Data OutputThe GPS160 series of sensors is a high-performance GPS designed for use with chart plottersDigital Yacht has introduced a specific version of the GPS160 which is a simple replacement for older Furuno plotter and GPS systems.  Devices like the Furuno GP32, Navnet, and GPS310/320 utilize a specific format for GPS data and this sensor emulates that for easy compatibility.  Some of these older GPS sensors have suffered from technical issues with the GPS rollover changes which can render chart plotter systems useless.  The GPS160F provides an economical and reliable solution to these problems.In conjunction with Furuno UK, Digital Yacht has developed a special version of their popular GPS160 Smart GNSS Sensor “TriNav” that outputs the older NMEA 0183 sentences and data format that the legacy Furuno systems can read. Now if a Furuno customer has a problem with their existing Furuno GPS (GP310/GP320/GP32/etc.) they can use the GPS160F as a simple “drop-in” replacement for their failed positioning sensor.The GPS160F has been tested with a wide variety of legacy Furuno products including; the original NavNet MFDs, NavNet VX2, M1735 Radar, GP7000, and the FCV family of sounders.Supplied with a 10m cable and user manual with dedicated Furuno interfacing information, the GPS160F will work straight out of the box and just requires a simple 4-wire connection to the existing Furuno system.Features: GPS160 for legacy Furuno systems Refined anti-spoofing algorithm for robust performance of position and interference rejection Many formats of NMEA data output including datum information –users can configure through internal DIP switches Ultra-low (<20mA) power consumption at 12V DC 10M cable

Read more less