Marine Navigation & Instruments - NMEA Cables & Sensors

ST-Ng to DeviceNet MaleSeaTalkng backbone cable to DeviceNet (Male) - 400mm

Read more less

ST-Ng to DeviceNet FemaleSeaTalkng backbone cable to DeviceNet (Female) - 400mm

Read more less

SeaTalk 1 to SeaTalkng Converter KitThe SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkng data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. The SeaTalk to SeaTalkng Converter kit is a compact solution that connects in-line with the SeaTalkng instrument network. The converter kit includes all of the necessary components to interface to SeaTalk 1 devices, and establish basic SeaTalkng connectivity on the vessel including: SeaTalk 1 to SeaTalkng converter SeaTalkng Terminators (x2) SeaTalkng Blanking Plugs (x2) 400mm (15") SeaTalk 1 to SeaTalkng converter cable SeaTalkng power cable 1m (3.3') SeaTalkng spur cable Features: Easy plug-and-play connectivity with SeaTalkng networks. Works with select SeaTalk 1 instruments, GPS sensors and LifeTag. Included SeaTalkng components establish basic backbone connectivity. Easily expanded using Raymairne SeaTalkng network components. Owner's Manual (pdf)

Read more less

NMEA 2000 1M Drop CableThis Digital Yacht cable is a 1m (3ft) NMEA 2000 drop cable made of metal connectors for maximum reliability. The drop cable allows users to expand the NMEA 2000 to whatever size is needed.*Digital Yacht “Drop Cables” can also be used as backbone cables and are easily connected to make any length of backbone cable required. Also, the total length of all drop cables must be less than 76m.Features: 1m (3ft) NMEA 2000 Drop Cable Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating IP68 Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 1m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 1"H x 7"W x 7"L WT: 0.2 lbs UPC: 703791696338 Quick Guide (pdf)

Read more less

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Specifications: Connection Gender: Female-Female Cable Length (Meters): 9m Box Dimensions: 1"H x 7"W x 9"L WT: 0.95 lbs UPC: 091975004841

Read more less

NMEA 2000 Drop Cable - 1MAncor's NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop cables are smaller in diameter and more flexible than backbone cables for easy connection to NMEA 2000 devices. The drop cables are available in four lengths from 0.5 meter (1.6 feet) to 5 meters (16.4 feet) to cover a wide variety of applications.Features: Color coded for easy installation and component identification Super flexible 22 AWG power conductors for ease of installation and wire routing NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 1m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 2"H x 4"W x 7"L WT: 0.2 lbs UPC: 091887988420 Brochure (pdf)

Read more less

NavAlarm NMEA 2000 Audio AlarmFeatures: Universal NMEA 2000 alarm – guaranteed to wake even the deepest sleeping crew member! Ultra loud 102dB sounder for any NMEA 2000 alert Compatible with standard NMEA 2000 alert PGNs  – becoming mandatory for MFDs from all manufacturers Dual volume alert levels Ultra rugged and IPx5 waterproof protection Integrated silence/reset switch Ideal accessory for CO Alert, MOB Alert, or NavAlert products and any other NMEA 2000 device generating Alert PGN – EG: Sea AI, Talos lightening alert etc

Read more less

NMEA 2000® Backbone/Drop CableExtend your NMEA 2000® backbone with Garmin's 1' (0.3M) backbone/drop cable.Compatible Devices: AIS™ 300/600 Blackbox Transceiver GBT™ 10 GCL™ 20 Low-light Imaging Camera GDL™ 40 GET™ 10 GFL™ 10 GFS™ 10 GHP™ 12 Autopilot System GHP™ 20 Marine Autopilot System for Steer-by-Wire, Viking® and Yamaha® Helm Master™ GHP™ 20 Marine Autopilot System with SmartPump GMI™ 10/20 Marine Instrument GPS 19x NMEA 2000® GPSMAP® Series VHF 200/300 Marine Radio VHF 300 AIS WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 Cable Length (Meters): 0.3m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 1"H x 5"W x 7"L WT: 0.09 lbs UPC: 753759078447

Read more less

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Specifications: Connection Gender: Female-Female Data Interface: NMEA 2000 Cable Length (Meters): 5m Box Dimensions: 1"H x 7"W x 7"L WT: 0.55 lbs UPC: 723193060360

Read more less

Backbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. Specifications: Connection Gender: Female-Female Data Interface: NMEA 2000 Cable Length (Meters): 1m Box Dimensions: 1"H x 5"W x 6"L WT: 0.05 lbs UPC: 723193060346

Read more less

Spur CableRaymarine 3 meter Spur Cable for SeaTalkng Specifications: Cable Length (Meters): 3m Box Dimensions: 1"H x 7"W x 8"L WT: 0.5 lbs UPC: 723193060407

Read more less

NMEA 2000 terminator - femaleWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Female Data Interface: NMEA 2000 NMEA 2000 Connectors: Terminators Box Dimensions: 1"H x 1"W x 1"L WT: 0.02 lbs UPC: 753759078171

Read more less