Marine Navigation & Instruments - NMEA Cables & Sensors

NMEA 2000 Backbone Cable - 10MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone cables are available in four lengths from 0.5 meter (1.6 feet) to 10 meters (32.8 feet) to cover a wide variety of applications.Features: Color coded for easy installation and component identification Large 18 AWG power conductors to reduce voltage drop and provide better reliability for critical backbone cables NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 10m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 3"H x 9"W x 10"L WT: 2.8 lbs UPC: 091887982251 Brochure (pdf)

Read more less

NMEA 2000 6M Drop CableThis Digital Yacht cable is a 6m (20ft) NMEA 2000 drop cable made of metal connectors for maximum reliability. The drop cable allows users to expand the NMEA 2000 to whatever size is needed.*Digital Yacht “Drop Cables” can also be used as backbone cables and are easily connected to make any length of backbone cable required. Also, the total length of all drop cables must be less than 76m.Features: 6m (20ft) NMEA 2000 Drop Cable Standard “Micro C” connectors make it very easy for future network expansion Metal connectors improve reliability Waterproof rating IP68 Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 6m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 2"H x 7"W x 10"L WT: 0.75 lbs UPC: 703791696352 Quick Guide (pdf)

Read more less

Maretron NM-NM Mini Gender Changer, Male to MaleMaretron cables have a male connector on one end and a female connector on the other end. Normally, the male connector points back towards the network power supply, but on some occasions, this gets reversed and a gender changer can be used to get back to the desired connector type.Waterproof seals for reliable connections Easily swap connector gender to get back to desired connector type Specifications: Connection Gender: Male-Male Box Dimensions: 1"H x 2"W x 5"L WT: 0.21 lbs UPC: 873804002392

Read more less

NMEA 2000 right angle cableWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 2m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 1"H x 4"W x 5"L WT: 0.4 lbs UPC: 753759078270

Read more less

NMEA 2000 90° Elbow ConnectorAncor's NMEA 2000 Approved 90 degree elbow makes cable routing easier. The connector is installed between two cables to reduce stress on the cables and create a compact installation.Features: Color coded for easy installation and component identification NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 Box Dimensions: 1"H x 3"W x 5"L WT: 0.06 lbs UPC: 091887982336 Brochure (pdf)

Read more less

NMEA 2000 Backbone Cable - 5MAncor's NMEA 2000 Approved Backbone Cables offer connection to an NMEA 2000 tee connector. The yellow couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The backbone cables are available in four lengths from 0.5 meter (1.6 feet) to 10 meters (32.8 feet) to cover a wide variety of applications.Features: Color coded for easy installation and component identification Large 18 AWG power conductors to reduce voltage drop and provide better reliability for critical backbone cables NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 5m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 3"H x 7"W x 8"L WT: 1.4 lbs UPC: 091887982244 Brochure (pdf)

Read more less

GPS160F with Furuno Format Data OutputThe GPS160 series of sensors is a high-performance GPS designed for use with chart plottersDigital Yacht has introduced a specific version of the GPS160 which is a simple replacement for older Furuno plotter and GPS systems.  Devices like the Furuno GP32, Navnet, and GPS310/320 utilize a specific format for GPS data and this sensor emulates that for easy compatibility.  Some of these older GPS sensors have suffered from technical issues with the GPS rollover changes which can render chart plotter systems useless.  The GPS160F provides an economical and reliable solution to these problems.In conjunction with Furuno UK, Digital Yacht has developed a special version of their popular GPS160 Smart GNSS Sensor “TriNav” that outputs the older NMEA 0183 sentences and data format that the legacy Furuno systems can read. Now if a Furuno customer has a problem with their existing Furuno GPS (GP310/GP320/GP32/etc.) they can use the GPS160F as a simple “drop-in” replacement for their failed positioning sensor.The GPS160F has been tested with a wide variety of legacy Furuno products including; the original NavNet MFDs, NavNet VX2, M1735 Radar, GP7000, and the FCV family of sounders.Supplied with a 10m cable and user manual with dedicated Furuno interfacing information, the GPS160F will work straight out of the box and just requires a simple 4-wire connection to the existing Furuno system.Features: GPS160 for legacy Furuno systems Refined anti-spoofing algorithm for robust performance of position and interference rejection Many formats of NMEA data output including datum information –users can configure through internal DIP switches Ultra-low (<20mA) power consumption at 12V DC 10M cable

Read more less

NMEA 2000 Single Device Backbone Starter KitBasic starter kit for adding a new NMEA 2000 network to your boat.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Data Interface: NMEA 2000 Box Dimensions: 3"H x 7"W x 7"L WT: 1.9 lbs UPC: 091887991338

Read more less

GPS160 TriNav Sensor w/iKonvert NMEA 2000 Interface BundleThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.TriNav technology allows all three systems to be simultaneously utilized for navigation. The device can also be field programmed for a variety of modes such as single GNSS operation (eg Galileo only) as well as output configurations such as update rate, NMEA sentence structure etcThe GPS160 is available with a NMEA 0183 output (4800, 38400 and 115200 baud programmable) and a USB variant for PC, MAC and Linux. For NMEA 2000 systems, a bundle is available with iKonvert allowing easy and flexible NMEA 2000 installation without the need for cumbersome drop cables.The GPS160 also support an external MOB switch or device. When activated, it creates a “synthesized” AIS SART MOB message on the NMEA output which can be interfaced with a local plotter for MOB identification.The GPS160 supports GPS, Glonass and Galileo positioning. Our TriNav technology is used to combine signals from all three systems to compute the best possible fix accuracy and reliability.Galileo is the global navigation satellite system (GNSS) that has been developed over the past two decades. It joins the GPS and GLONASS systems and offers mariners a 3rd reliable positioning source. It is planned to be fully operational in 2020.Features: 72 channel GPS, Glonass and Galileo GNSS positioning receiver Typically sub 1m accuracy thanks to TriNav technology –combines all satellite data for optimum accuracy Can be configured as dedicated GPS, Glonass or Galileo only device Sophisticated anti-spoofing algorithm for robust positioning performance and interference rejection Available in NMEA 0183, NMEA 2000 (with iKonvert interface)and wireless (with WLN10SM) variants GPS160USB also available with USB connection for PC/MAC User/field selectable 4800, 38400 and 115200 baud operation through simple internal DIP switches Multiple formats of NMEA data output including datum information –user configurable through internal DIP switches Up to 18Hz update rate (user selectable) Ultra low (<20mA) power consumption at 12V DC Input for MOB switch/system – when activated generates synthetic AIS MOB NMEA output to activate MOB position on plotter Professional system (ECDIS) support with datum sentence structure (DTM/GBS/GNS/GRS/GSA/GST) Puck installation or fits 3rd party industry standard 1” x 14 TPI threaded mount Specifications: Data Interface: NMEA 2000 Box Dimensions: 4"H x 7"W x 10"L WT: 1.5 lbs UPC: 703791696055 Brochure (pdf)

Read more less

NMEA 2000 Drop Cable - 5MAncor's NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop cables are smaller in diameter and more flexible than backbone cables for easy connection to NMEA 2000 devices. The drop cables are available in four lengths from 0.5 meter (1.6 feet) to 5 meters (16.4 feet) to cover a wide variety of applications.Features: Color coded for easy installation and component identification Super flexible 22 AWG power conductors for ease of installation and wire routing NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Male-Female Data Interface: NMEA 2000 Cable Length (Meters): 5m NMEA 2000 Connectors: Backbone/Drop Cables Box Dimensions: 3"H x 7"W x 8"L WT: 0.8 lbs UPC: 091887988468 Brochure (pdf)

Read more less

Attaches to Maretron SIM100 for NMEA 2000 network monitoring Real Test technology allows for functional testing in the field Trouble relay for circuit trouble or detector end of life notification Provides wiring supervision 4-wire detector; mounts to wall or ceiling WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Owner's Manual (pdf)

Read more less