Marine Navigation & Instruments - Radars

Cyclone 3' Open Array OnlyRaymarine's Cyclone product line blends cutting-edge design, high-performance CHIRP pulse compression technology, and innovative features to give boaters the very best in situational awareness.  Specifications: Array Size (Inches): 36" Box Dimensions: 9"H x 22"W x 50"L WT: 20 lbs UPC: 723193836576 Brochure (pdf)

Read more less

Quantum 2 Q24D Radar Doppler with 10M Power & Data CablesThe Raymarine Quantum 2 Radar has Doppler collision avoidance technology. The Quantum 2 next generation CHIRP pulse compression radar by Raymarine provides superior target awareness at both long and extremely short ranges.Using advanced Doppler processing, the system instantly highlights moving radar contacts and color codes them to indicate whether they are inbound or outbound. Quantum with Doppler makes it easy to discern potentially dangerous targets when navigating in high-traffic areas.Easily Identify Dangerous TargetsRaymarine Quantum 2 Doppler target processing readily identifies and color codes moving radar contacts for instant recognition and reduced risk of collision.Safer NavigationQuantum 2’s exclusive Safety Sector feature provides the maximum level of visibility to dangerous targets in the path of your vessel (both mobile and stationary).Superior Collision AvoidanceDoppler-enabled MARPA provides an effortless means of dangerous target tracking by eliminating the need to setup guard zones. Raymarine MARPA target tracking is the same technology trusted by the United States Coast Guard.Features: Doppler moving target display allows for superior situational awareness at-a-glance Fully automatic ARPA target tracking, along with manual MARPA mode Adjustable TrueTrails target history shows the motion history of moving contacts CHIRP Pulse Compression detects contacts as close as 18-feet for zero-visibility navigation 24-mile range for early detection of traffic, navigation aids, landfall and weather Immediate awareness – Quantum starts up and is ready to go in seconds Superior interference rejection eliminates noise from other radars Simplified installation with Wi-Fi or thin wire network connectivity Easy upgrade – Quantum 2 fits the same bolt pattern as other Raymarine scanners Lightweight and easy to install – Quantum weighs up to 50% less than comparable magnetron radars Safe emissions – mount Quantum anywhere onboard Low power consumption for extended battery life under sail How Doppler Radar Works: Microwave energy waves are bounced off of a distant target, just like conventional radar. Moving targets send back echoes whose frequencies shift upward or downward from what was originally transmitted. For inbound targets, the frequency increases as the leading edge of the returning echoes are received more frequently as the target’s range decreases. For outbound targets, the frequency drops as the returning echoes spread out as its range increases. Doppler radars are engineered to detect these small shifts in wave frequency, and use them to classify moving radar targets. Doppler Target ProcessingDoppler radar is tuned specifically to detect the radar echo frequency shift returned by moving vs. stationary targets.Quantum 2 then uniquely color codes moving targets to indicate whether they are getting closer, or moving away. Inbound targets are colored red Outbound targets are colored green Color coded targets make it simple to pick out moving traffic from other stationary targets like land, navigation aids or stopped/anchored vessels.Quantum 2 Safety SectorDoppler does an excellent job of bringing attention to moving targets, but it does downplay stationary targets, that can be equally as dangerous.Safety Sector provides equal attention to these imminent threats by coloring them as inbound targets. Potential targets include: Buoys Exposed Hazard (rocks, pilings, etc...) Slow moving, low visibility vessels Quantum 2's Safety Sector spreads 15° from the bow to a distance of approximately 200m NOTE: The safety sector is not visible on the display. Quantum 2 automatically processes and highlights targets within this region in red.The Quantum 2 also features fully automatic target acquisition and tracking. Configure custom safety or alarm zones and be alerted to new radar contacts entering the zone. Quantum 2 can begin tracking those contacts automatically, calculating their course, speed, closest point of approach and more. You’ll be alerted to dangerous contacts with audible alerts and easy to understand on-screen graphics.Quantum 2 also features Raymarine’s True Trails target history display. The True Trails features enables you to see a historical “wake” behind every moving contact. This additional information makes it even easier to interpret the motion of other vessels, and make smart maneuvering decisions to pass safely.Like every Raymarine Quantum system, you’ll also benefit from a rugged and lightweight design that is super-easy to install. Quantum 2 has very low power consumption making it especially friendly to vessels running exclusively on battery power. Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD.The Quantum 2 with Doppler truly sets the standard for on the water safety and collision avoidance. Specifications: Array Size (Inches): 18" Power - Output: 20w Box Dimensions: 12"H x 23"W x 23"L WT: 21.7 lbs UPC: 723193825518 Quick Guide (pdf)

Read more less

8.5" Color LCD Radar with 4kW Output - 1/16-36nm Range - 25" RadomeSI-TEX's T-941 Radars feature sophisticated Hyper-Digital Processing™ (HDP) Technology for real-time presentation and superior target discrimination.Features: It virtually eliminates unwanted noise to provide a clearer detailed image of targets and enhances the detection of smaller targets Radome: 4kW, 36NM, 25" Display Brilliant 8.4" color LCD daylight viewable display 480 x 640-pixel resolution and anti-reflective glare coating for outstanding viewing True-color radar feature displays echoes in different colors depending on signal strength The real-time presentation offers smooth movement as bearing changes The T-941 has two-speed antenna rotation for tracking of quick-moving, close-in targets: 48 RPM 24 RPM (Requires 24 Volt DC input) Selectable range scales from 1/16 NM Warning Zone alerts you to "incoming" and "departing" targets breaking your preset guard zone Automatic hands-off tuning maintains maximum sensitivity at all times with manual override for the experienced use RGB output for connecting (2) optional external monitors Easy access to all system functions with simply arranged keypad, programmable function keys, comprehensive menus and dedicated rotary knobs for instant control of Gain and STC Built-in flush mounting system makes installation easy All this advanced radar technology is housed in a sleek, waterproof (IPX5 rating) case design that can be mounted almost anywhere Dual Range Radar function lets you view split-screen displays of both long and short-range targets simultaneouslyMonitor a nearby buoy and a far off island at the same time True Trail function clearly identifies moving targets from stationary targets The display shows the exact movement of other vessels like drawing tails, while land and buoys are shown as stationary objects even while your vessel is moving Accepts CCD camera input, to display split-screen Radar and CameraAllows you to monitor important areas of your vessel while shill keeping watch of your surroundings Optional ATA (Automatic Tracking Aid) allows you to tracks up to 50 user designated targets Designate the target and the radar will automatically provide the target distance, speed, bearing, course, and closest point of approach on all user targets selected. Optional AIS interface displays information on up to (100) AIS targets including the vessel's MMSI number, name, course, and speed of each vessel with an AIS transmitterThis information is sent continuously and is useful in navigating, traffic monitoring, and collision prevention Specifications:Antenna Unit: Scanner 25" Radome Peak Power Output 4kW Output Frequency 9410 + 30MHz Beam Width: Horizontal 3.9° Vertical 25° Rotation 24 or 48 rpm (48 rpm; 24V DC or more Pulse Width .08, 0.15, 0.3, 0.5, 1 use IF Frequency 60 MHz Range Accuracy Better than 8m Min. Detecting Distance: Within 25m Display Unit: Display Size/Type 8.4" TFT Color LCD (480 x 640 pixels) Off Centering Max 66% Display Modes Heads up, North up*, Course up* WPT up**, True motion* Indication System PPI, PPI/PPI, PPI/NAV Range Scales NM 1/16, 1/8, 1/4, 1/2, 3/4, 1, 1.5, 2, 3, 4, 6, 7, 12, 16, 24, 32, 48 (T -- PNEW to 24,T -- 941 to 32, T -- 940 to 48) Range Rings NM 1/32, 1/16, 1/8, 1/4, 1/2, 3/4, 1/1.5, 2, 3, 4, 6, 8 12 Bearing Accuracy Better than + 1° Video Level 8 colors Distant Unit (VRM unit) NM, SM, KM Alarms Entry or Breakaway (In and Out) Other Functions Interference rejection, Target expansion, VRM, EBL, Parallel index, Course position (Lat/Lon), Bearing (true/relative), Trail*, RGB Monitor output, Slave display monitor input/output, External buzzer. Accepts CCD camera input AIS Interface Option (100 targets) ATA Option (Auto/Manual, 50 targets) Input Data Format BEC, BWC, BWR, DPT, DBT, GGA, GLL, GNS, HDG, HDM, HDT, MTW, MWD, MWV, RMA, RMB, RMC, VHW, VTG, XTE Output Data Format TTM, TLL Power Requirements 10.8 - 31.2 Volt DC Power Consumption 55 Watt Water Protection Display: IPX 5 Antenna CFR 46 IPX What's In The Box? Display Unit MRD-103 with hardcover Connecting Cable 242J158055A -10 M with 2 connectors DC Power Cable CW265-2M 2m CCD Camera Cable CW-405-0.3M Operation manual, Quick reference Fuse (8A) Specifications: Array Size (Inches): 25" Power - Output: 4kW Range - Max (Miles): 36nm Box Dimensions: 9"H x 11"W x 14"L WT: 46.25 lbs

Read more less