Marine Navigation & Instruments

Type 1 Pump 12voltReversing hydraulic pump for use with steering systems equipped with 4.914 cubic inch (80cc 230cc) hydraulic steering rams. The Type 1 hydraulic drive is compatible with both S1/S1G and S2/S2G corepacks. Use the table below to determine the Type 1 hydraulic drive's capacity when used with each corepackCorepack Used S1 or S1GRam Capacity 4.9in - 10.5in (80CC-172CC)Maximum Stall Pressure at 12V 750psi (50bar) (no load) 67in/min (1000cc/min)Corepack Used S2 or S2GRam Capacity 4.9in - 14in (80cc - 230cc)Maximum StallPressure at 12V 750psi (50bar)Peak Flow Rate(no load) 67in/min (1000CC/min) Specifications: Type: Pumps/Drives Box Dimensions: 4"H x 5"W x 10"L WT: 5.6 lbs UPC: 023193811208 Owner's Manual (pdf)

Read more less

BlueNet™ 30 Gateway The Garmin BlueNet 30 gateway is required for Garmin BlueNet™ network compatible devices to network with legacy Garmin marine devices. Through this gateway, you can connect a Garmin BlueNet network to a legacy Garmin Marine Network for a premium control experience.In the Box: Garmin BlueNet 30 Gateway Power cable Mounting hardware Garmin BlueNet™ network cable (2 meters) Documentation

Read more less

Bail Mount with Knobs Use our replacement bail mount with knobs to surface mount your GPSMAP® device.Compatible Devices:GPSMAP® 720GPSMAP® 720sGPSMAP® 740GPSMAP® 740sWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 5"W x 9"L WT: 0.33 lbs UPC: 753759102456

Read more less

NMEA 2000 field installable connector - femaleWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Connection Gender: Female Data Interface: NMEA 2000 NMEA 2000 Connectors: Field Connectors Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 753759078379

Read more less

10M Power & Analog Video Cable for NightwavePower and analog video replacement cable for Nightwave. An official SIONYX accessory, this cable is 10 meters (32.8 feet).

Read more less

Hybrid Camera Recorder - No IrisControl - 1TB HDD - 8 Analogue & 4 IP Camera InputsYou’re in Control…CMAC™ is a feature-rich command, management, and control system for your onboard cameras and alarms. Multiple Camera FormatsHybrid models accept analog, AHD (HD-TVI / HD-CVI), and IP formats. By supporting multiple formats, not only does CMAC offer maximum compatibility, but it also future-proofs your system should you decide to upgrade your cameras.High-Definition Digital OutputCMAC systems feature a high-definition HDMI digital video output to provide the very best live, high-quality footage on compatible chartplotters, TVs, and dedicated monitors. CMAC can also be used with standard definition devices with any HDMI to composite video converter.USB Touch ControlIn addition, to control your compatible MFD network, CMAC features a USB touch control interface. This means chart plotters with USB touch outputs, such as Garmin’s 8000 series, can be used to drive your PTZ cameras with pinpoint accuracy.WiFi / Remote P2P ConnectivityConnect CMAC to your onboard WiFi router and view your cameras from around your boat on your smartphone, tablet, or computer. Perfect for keeping an eye on what’s happening above from the below deck! CMAC can also be accessed remotely via P2P connectivity if you have internet access.Integrated Network Video RecorderCMAC built-in recorder is fully configurable to maximize storage time, adjust resolutions and frame rates, set video motion detection, and much more.Features: 1 terabyte hard disc drive This hybrid version can connect 4 IP cameras and 8 analog cameras  Wired for a basic unit Fully integrated camera and alarm control & management system for boats Upload your own deck plans & photos and drag & drop camera & alarm icons to select & control Control and switch your cameras Configure your boat alarm system, control individual and group alarms Firmware is upgradable to unlock features as & when they become available This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Brochure (pdf)

Read more less

iAISTX Plus Class B Wireless & NMEA 2000 Transponder**As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. **Click here to download form.iAISTX Plus has been designed specifically for the growing number of boaters who use an iPad or Android tablet for their navigation tasks. As a full function Class B transponder, it sends your boat position and identity data to other AIS equipped vessels as well as providing a wireless interface for mobile devices with popular apps to display received data from other AIS equipped vessels.This PLUS model also has a NMEA 2000 interface (with integral drop cable) so that it can integrate with modern plotters, instruments and multi-function displays to provide AIS functionality.iAISTX Plus creates a secure, password protected, local Wi-Fi network which allows AIS and GPS data to be sent to popular iOS and Android apps such as Navionics, iSailor, Weather4D, SailGrib, iNavX, TimeZero and more. These apps offer a detailed overlay of local AIS targets all updated in real-time. Depending upon the app, you can click on a target and can see identity as well as collision avoidance data such as CPA (closest point of approach) and TCPA (time to closest point of approach).AIS transponders require one time programming with the boat’s identity and physical dimensions and this is done through a simple, embedded web interface via the tablet’s browser (Safari, Chrome, etc.).  This can also be used to silence the transmission and set up wireless parameters such as passwords.  Installation is simple – just connect power (12/24v), mount the supplied external GPS antenna and connect to a separate dedicated VHF antenna or to the boat’s existing VHF antenna using our SPL1500 or SPL2000 AIS-VHF antenna splitters.Features: Class B AIS transponder with a wireless interface for phones, tablets, iPads and PCs NMEA 2000 interface for plotter and multi function display AIS compatability Support for all the latest target types such as ATONs and AIS MOB devices Latest HF AIS technology for superior performance UDP and TCP/IP protocols supported for up to 7 connected devices Password protected, secure wireless connection Internal wifi antenna will typically footprint a boat up to 60ft in length Supplied with external GPS antenna and 10m (33ft) cable which can be deck mounted or fitted to standard 1” mount Compatible with 100s apps.  See our reviews at www.digitalyacht.net LED status indicators for wireless connection, data, status, time out, power and silent mode Easy embedded web interface for programming Measures just 20 x 14 x 4.5cm 12/24V operation and ultra-low 2W consumption

Read more less

DepthTrax In-Dash Digital Depth Gauge - Transom MountThe DepthTrax 2B includes advanced sonar, depth alarm, and keel offset capabilities.  With updated SONAR algorithms, the DepthTrax 2B reachs new depths.  Able to reach depths of 600 ft and tuned for high speed performance, the DepthTrax 2B reaches deeper and performs faster than any depth finder.  The DepthTrax 2B delivers a combination of performance and affordability unrivaled in any other depth sounder. Features: Algorithmic programming significantly reduces false readings and produces unmatched precision EasyTouch programming allows one-touch access to the user settings User programmable keel offset automatically adjusts depth readings for vessels’ draft requirements Selectable Imperial or Metric readout Dual Upper and Lower depth alarms can be set throughout the full depth range 3-Stage Advanced Warning System™ clearly signals an alarm condition with an audible alarm, LED and LCD indicators with one-touch alarm muting Automatic memory retention of all user settings Removable face system - includes White & Black faceplates and White/Black trim rings No glare, polarized LCD icon display with storage sun cover  SoftGlow™ backlit display and programming keys - low intensity, low temperature lighting prevents eye strain and condensation while providing unparalleled nighttime viewing Technical Specifications: Gauge Dimensions (Diameter x Depth) - 2" x 1.75" (51 x 45mm) Screen Dimensions (Height x Width) - 1.65" x .87" (42 x 22mm) Gauge Cut-out Size - 2" Operating Temperature - 0 to 160° F (-18 to 71°C) Depth Range - 2.5' to 600' (.7 to 180 M) Transducer Type - Transom Mount Transducer Frequency - 200kHz Transducer Beam Angle - 14° Transducer Cable Length - 30' (9 M) Power Requirement - 12 - 14 VDC In the Box: Gauge Bezel/Faceplate - Black and White Display cover Mounting hardware Transducer - transom mount w/30' cable Instruction manual  *Sold as an Individual Specifications: Box Set: No Gauge Size: 2" Gauge Type: Depth Sounder Voltage - Input Range (Volts): 12 - 14 Box Dimensions: 4"H x 7"W x 9"L WT: 1.7 lbs UPC: 818800010118 Owner's Manual (pdf)

Read more less

Cat Hawk Wind Indicator for Non-Spin Catamarans up to 8MThe Cat Hawk is designed for non-spinnaker Catamarans up to 8m. It has been developed to mount onto the front of the Forestay Bridle where it is ideally situated for maximum visibility both upwind and downwind. The Cat Hawk uses the same Vane Arm as the Hawk with all the benefits of Balance, "V" Jewel bearing, weight and UV Protection that it brings. The reference arms can be set for either upwind or downwind angles. The Support Rod is aluminum and has the Hawk quick mount clip for quick rigging and de-rigging. Specifications: Vane Arm length 25cm (9.8") Weight 30 grams Specifications: Type: Wind Indicator Instrument Function: Wind Box Dimensions: 2"H x 4"W x 13"L WT: 0.25 lbs UPC: 652773100304

Read more less

Trolling Motor MountEasily attach your compatible scanning transducer to the trolling motor of your boat. The low-profile design of the mount provides ultimate protection from underwater obstructions and easy mounting. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 6"W x 7"L WT: 0.35 lbs UPC: 753759151690

Read more less

RayNet Cable Pullers - 5 PackRaymarine's Cable Pullers securely attach to the twist-lock plug on RayNet networking cables and provide a convenient, center-mounted attachment point for your pull string. The cable puller protects the connector's internal pins from damage, acts as a fairing to make pulls through tight spaces easier, and prevents crush/bend damage to the cable/connector joint. The cable pullers are reusable, and come in packages of 5 pullers.

Read more less

Engine Oil Temperature Sensor - M16x1.5 Thread - 150°C Temp RangeThese resistive temperature sensors are built in a housing of brass. All sensors come with a sensor output and an insulated ground pin. The two connections are interfaced through the metal plate connectors. The sensors can be applied in a wide field of applications.Features: Function - Oil temperature, coolant temperature Length - 28.5mm (1-1/8") Thread - M16x1.5 Calibration - 150°C Measurement Range - 150°C Output Signals - Resistive IP67 Insulated ground pin Quick Guide (pdf)

Read more less