Marine Navigation & Instruments

Power Cable - 10M with Bare Wires for QuantumQuantum 10M power cable with Bare wires. Specifications: Type: Power Cords Box Dimensions: 2"H x 10"W x 12"L WT: 2.2 lbs UPC: 723193793404

Read more less

Adapter Cable for Axiom Pro with CP370 TransducerUsed to connect a conventional 600W transducer to an Axiom Pro multifunction display. 11-pin to 8-pin adapter cable to attach to an existing 8-pin Airmar CP370 style transducer to Axiom Pro. Specifications: Type: Adapters Box Dimensions: 1"H x 9"W x 12"L WT: 0.35 lbs UPC: 723193817278

Read more less

RealVision 3D Transducer Extension Cable - 8M (26')RealVision 3D Transducer Extension Cables work with the transom-mounted RV-100 and through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end.  For best performance, Raymarine recommends using no more than two (2) extension cables in any cable run. Specifications: Type: Extension Box Dimensions: 2"H x 10"W x 10"L WT: 2.4 lbs UPC: 723193817094

Read more less

Quantum™ Data Cable - White - 15M15M Cable specifically for Raymarine's Quantum™ Radome with Wi-Fi and Ethernet. Specifications: Type: Cables Box Dimensions: 2"H x 9"W x 11"L WT: 1.4 lbs UPC: 723193793411

Read more less

Free Standing MountFLIR Free Standing Mount for FLIR's AX8™ and Raymarine Dragonfly 4/5/7.

Read more less

4m Extension Cable f/CPT-DV & DVS Transducer & Dragonfly 4, 5 & Wi-FishUse Raymarine's 4m cable to extend the length of the standard cable provided with Dragonfly CPT-DV and DVS transducers. Specifications: Type: Extension Box Dimensions: 1"H x 9"W x 12"L WT: 0.7 lbs UPC: 723193793558

Read more less

The EV Sensor Core At the center of every Evolution system is the intelligent EV sensor core, a 9-axis sensor that monitors vessel motion in all three dimensions. The innovative EV sensor core combines advanced solid-state sensors with the Evolution autopilot processor into a single easy-to-install housing. Mount the EV sensor core above or below decks, the rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing and submersion standards.The EV-1 is designed for Evolution mechanical and hydraulic autopilot systems. SeaTalkng networking enables a single cable connection for power and data to the Evolution ACU (actuator control unit) and extended SeaTalkng and NMEA2000 networks.Features: Precision monitoring of heading, pitch, roll, and yaw allowing the autopilot to evolve instantly as sea conditions and vessel dynamics change Flexible installation options. Mount above or below deck Simple SeaTalkng connectivity to the control head and ACU Solid state sensor technology delivers dynamic accuracy to within 2° in all conditions Auto-compensation for on board magnetic fields and reliable heading accuracy in the northern and southern extremes Fast and reliable heading data for MARPA, radar overlay, and heading modes on Raymarine multifunction displays Specifications: Type: Parts Box Dimensions: 4"H x 8"W x 13"L WT: 1 lbs UPC: 723193768884 Brochure (pdf)

Read more less

i60 SeaTalkng Instruments - Wind w/Wind Vane TransducerThe all-new i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays.For the ultimate in flexibility the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i60 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.i60 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase.i60 Wind Instrument w/Windvane TransducerFull featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting and high-contrast text and graphics. Short arm vane supplied with 30m (97.5') cable Compatible with Raymarine's masthead transducer (recommend for sailboats) Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed. Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument i60 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy Specifications: Transducer Type: Vane Shape: Square Instrument Function: Wind Box Dimensions: 5"H x 12"W x 27"L WT: 8 lbs UPC: 723193854228 Owner's Manual (pdf)

Read more less

iTC-5 Instrument Transducer ConverterThe iTC5 Instrument Transducer Converter enables the use of common analog transducer signals with new digital instrument displays like Raymarine's i70 and ST70 Plus. The ultra-compact iTC5 has connections to host the five most common analog transducers; depth, speed/temperature, wind, compass and rudder. The iTC5 instantly converts these 5 analog signals to digital SeaTalkng protocol.In addition to providing analog-to-digital conversion, the iTC5 provides all of the necessary power and communications connections to the transducers. This greatly simplifies the installation of new systems, and also provides a simple and cost-effective means for owners of older analog instrument displays to upgrade to the latest digital display technology. The iTC5 eliminates the need for expensive "smart" transducers or individual instrument pods. Complete control for calibration and alarms is performed through the i70 or ST70 Plus instruments.The iTC5 connects to Raymarine's SeaTalkng network and works with most analog transducers from legacy Raymarine ST30, ST40, ST50, ST60, ST80 and ST290 series instruments. Additionally the iTC5 works with Raymarine fluxgate compass modules as well as rotary and linear rudder feedback transducers to support compass heading and rudder angle instruments.Features: All-in-one analog to digital converter for depth, speed/temperature, wind, compass and rudder transducers Outputs SeaTalkng and NMEA2000 data to digital instruments, MFDs and more Enables easy upgrade of legacy analog instrument displays without replacing transducers SeaTalkng network provides all necessary power and data connections Ideal for use with Raymarine i70 and ST70 Plus digital instrument systems Specifications: Type: Misc Box Dimensions: 2"H x 7"W x 9"L WT: 1.2 lbs UPC: 723193701164 Quick Guide (pdf)

Read more less

i50 SeaTalkng Instruments - DepthThe all-new i50 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i50 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i50 Digital Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays.For the ultimate in flexibility the i50 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i50 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.i50 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i50 Instruments are waterproof to IPX6 standards. The i50 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase.i50 Depth Instrument The i50 Depth Instrument offers accurate and reliable displays of depth, max depth and minimum depth. Shallow and deep depth alarms will keep you alert, along with a shallow and deep anchor alarms. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 connectivity for maximum flexibility Connect additional i50 depth displays Built-in depth transducer connection i50 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy Specifications: Shape: Square Transducer Type: Not Included Instrument Function: Depth Box Dimensions: 4"H x 7"W x 10"L WT: 2.15 lbs UPC: 723193730720 Owner's Manual (pdf)

Read more less

TA900 Paddle Wheel replacement kit Specifications: Type: Misc Box Dimensions: 1"H x 4"W x 5"L WT: 0.05 lbs UPC: 723193703144

Read more less

TA065 Small Cradle for Micro Compass (mid grey)Small Cradle for Micro Compass

Read more less