Marine Navigation & Instruments
Maretron Mini Termination Resistor - Male [TR-NM]
Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge. Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly Screw connector for positive connnection Termination resistors are used to terminate both ends of the trunk line
$17.50
Maretron Mini Termination Resistor - Female [TR-NF]
Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable. Like the double-ended cordsets, the termination resistors are waterproof and continue to function even while submerged in the bilge. Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly Screw connector for positive connnection Termination resistors are used to terminate both ends of the trunk line Specifications: Data Interface: NMEA 2000 Connection Gender: Female Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 873804002354
$17.50
Maretron Micro Cap - Used to Cover Female Connector [M000101]
Micro Cap - Used to Cover Female ConnectorMicro cap used to cover female connectors. Specifications: Connection Gender: Female Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 873804001388
$12.50
Maretron Micro Cap - Used to Cover Male Connector [M000102]
Micro Cap - Used to Cover Male ConnectorMicro cap used to cover male connectors. Specifications: Connection Gender: Male Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: 873804001395
$12.50
Raymarine RV-100 RealVision 3D All-In-One Transom Mount Transducer [A80464]
RealVision 3D™ All-In-One Transom Mount TransducerRaymarine’s RV-100 All-In-One Transom Mount Transducer lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D sonar. The RV-100 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside. The transducer has a built-in attitude and heading reference system (AHRS) that stabilizes the sonar imagery, automatically compensating for vessel motion. You’ll enjoy crystal-clear imagery in waves, swells and while maneuvering. The RV-100 also has a built-in fast response water temperature sensor for quick, accurate readings.The RV-100 is designed for easy transom mounting on outboard-powered motor boats. It features a rugged, marine-grade stainless steel mounting bracket with integrated kick-up to prevent damage in the event of a strike with floating debris, rocks, or stumps.The RV-100 can also be removed from the transom bracket and attached to the stainless Jack-Plate mounting bracket (sold separately) which is ideal for bass boats, flats boats and skiffs. The RV-100 can also be mounted onto stepped hull vessels using the optional stainless steel step-mounting bracket (sold separately)What’s in the Box? RV-100 All-In-One Transom Mount Transducer with 8-meter (26-foot) cable Transom bracket Mounting hardware Installation instructions Specifications: Temperature: Yes Speed Included: No Mounting Style: Transom Imagining: Standard/Down/Side Chirp: High Cable Length (Feet): 26' Pins: 25 Box Dimensions: 5"H x 11"W x 14"L WT: 5.3 lbs UPC: 723193816523
$424.99$373.50
Garmin BlueNet Network Cable - 6 [010-12528-30]
BlueNet™ Network Cable - 6'The Garmin BlueNet marine network cables offer additional cable lengths to help with installations. Additional sizes are sold separately.
$40.50
VDO ALAS Adjustable Fuel Sender - 6-3/4 to 23" - 240-33 Ohm [226-007]
ALAS Adjustable Fuel Sender - 6-3/4 to 23" - 240-33 OhmVDO ALAS 12/24 V adjustable swingarm senders are engineered for severe-duty use. The sender main body features a plated steel construction to help eliminate damage caused by fuel slosh. These units contain an SAE standard 5-hole metal mounting flange and body components, which can be adjusted from 6 in. to 23 in. tank depth, and are adaptable to right or left hand swingarm. For maximum durability, the wiper and thick film resistor are shielded (from fuel slosh) and the float arm stops to ensure the wiper remains in contact with its resistor board when tank is full or low. Features: Connection - M4 Stud Voltage: 6-24V *Sold as an IndividualWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Color: Gold Box Dimensions: 4"H x 4"W x 19"L WT: 1.2 lbs UPC: 754059001043
$44.99$42.50
Garmin 12-Pin To Dual 4-Pin Transducer Y-Cable [010-12234-05]
12-Pin To Dual 4-Pin Transducer Y-CableUse this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Adapters Box Dimensions: 1"H x 5"W x 5"L WT: 0.1 lbs UPC: 753759133603
$40.50
Garmin RJ45 Cable Coupler [010-10580-00]
Use cable coupler to join 2 marine network cables end to endWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
$59.99$58.50
Ancor NMEA 2000 Drop Cable - 1M [270301]
NMEA 2000 Drop Cable - 1MAncor's NMEA 2000 Approved Drop Cables offer connection between an NMEA 2000 device and tee connector. The black couplers connect to the corresponding Ancor tees creating a simplified, color coded network installation. The drop cables are smaller in diameter and more flexible than backbone cables for easy connection to NMEA 2000 devices. The drop cables are available in four lengths from 0.5 meter (1.6 feet) to 5 meters (16.4 feet) to cover a wide variety of applications.Features: Color coded for easy installation and component identification Super flexible 22 AWG power conductors for ease of installation and wire routing NMEA 2000 Approved, 100 percent universal and compatible with other manufacturers' products WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 3' Data Interface: NMEA 2000 Box Dimensions: 2"H x 4"W x 7"L WT: 0.2 lbs UPC: 091887988420 Brochure (pdf)
$35.99$24.50
Minn Kota MKR-15 Transducer Mounting Kit [1840201]
With rugged, durable construction, this kit fits transducers of all major manufacturers, and allows mounting on the lower unit of bow- or transom-mount trolling motors.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 8"W x 9"L WT: 0.5 lbs UPC: 029402007691
$28.50
Raymarine SeaTalkng Starter Kit [T70134]
Raymarine SeaTalkng Starter Kit SeaTalkng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. The SeaTalk to SeaTalkng Starter Kit is the perfect way to get started with your SeaTalkng compatible Raymarine product. The 5-way connector forms the start of your SeaTalkng backbone and your SeaTalkng product is connected via a Spur Cable. What's in the kit?A06064: SeaTalkng 5-way ConnectorA06031: SeaTalkng Backbone Terminator (x2)A06040: SeaTalkng Spur Cable 3MA06049: SeaTalkng Power Cable
$134.99$123.50