Marine Navigation & Instruments

With rugged, durable construction, this kit fits transducers of all major manufacturers, and allows mounting on the lower unit of bow- or transom-mount trolling motors.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Type: Mounting Brackets Box Dimensions: 4"H x 8"W x 9"L WT: 0.5 lbs UPC: 029402007691

Read more less

Raymarine SeaTalkng Starter Kit SeaTalkng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. The SeaTalk to SeaTalkng Starter Kit is the perfect way to get started with your SeaTalkng compatible Raymarine product. The 5-way connector forms the start of your SeaTalkng backbone and your SeaTalkng product is connected via a Spur Cable. What's in the kit?A06064: SeaTalkng 5-way ConnectorA06031: SeaTalkng Backbone Terminator (x2)A06040: SeaTalkng Spur Cable 3MA06049: SeaTalkng Power Cable

Read more less

i60 SeaTalkng Instruments - WindThe all-new i60 Instruments from Raymarine offer boaters an excellent combination of great looks, high performance and extreme value. Designed to accommodate either stand-alone or fully integrated installations, the i60 instruments feature Raymarine's exclusive SeaTalkng networking for simple installation and bullet-proof reliability. Each instrument offers extra-large digits, razor-sharp LCD displays and red backlighting for outstanding visibility in all lighting conditions. i60 Analog Instrument displays are fully compatible with our i70 Color Multifunction Instrument too. Boaters can now customize their systems with any combination of monochrome LCD, color LCD and analog instruments as needed. Raymarine also offers the p70 and p70R Color Autopilot controllers which also match with our instruments and multifunction displays.For the ultimate in flexibility the i60 Instruments support SeaTalkng 0 CANBUS networking, as well as our original SeaTalk 1 networking. This makes upgrading older instruments a breeze. Connect your analog depth, speed and wind transducers directly to respective instrument display, or use the displays as repeaters for SeaTalkng smart transducer data: the choice is yours. The ultra-sleek design of i60 line is designed to complement our full line of a-Series, c-Series and e-Series Multifunction displays, and looks great on the helm of any boat. Each instrument comes with a low-profile surface mounting kit and silicone rubber sun cover. An optional bracket mounting kit is also available separately.i60 Instruments are designed to operate from 12V DC power, and are ultra-efficient drawing less than 1W as repeaters, or 2.4W while hosting a transducer. All of the i60 Instruments are waterproof to IPX6 standards. The i60 instruments are all covered by Raymarine's industry leading 2-year warranty, upgradeable to 3-years at no charge by registering online with 90 days of purchase.i60 Wind Instrument Full featured wind display for cruising and racing sailboats. The i60 Wind features an easy-to-read analog dial, nighttime red backlighting and high-contrast text and graphics. Compatible with Raymarine's masthead transducer (recommend for sailboats) or the Rotavecta transducer (recommended for powerboats) Displays wind speed, direction, Beaufort, max wind speed, VMG, and tack Alarms for high and low apparent wind angle, low true wind speed, and maximum true wind speed. Apparent wind display and True wind when integrated with a compass or autopilot, and speed instrument i60 Key Features Ultra-modern design complements Raymarine's latest a-Series, c-Series and e-Series Multifunction display and instrument systems. Large, crisp LCD displays with high contrast for excellent visibility. Red backlighting for outstanding night-time visibility. SeaTalkng and SeaTalk-1 Networking for maximum flexibility. Fully compatible with i70, p70 and p70R Color Instruments and Autopilots. 110mm x 115mm footprint is identical to older Raymarine ST60+ instrumentation making upgrading easy Specifications: Shape: Square Instrument Function: Wind Box Dimensions: 4"H x 7"W x 10"L WT: 1.8 lbs UPC: 723193762851 Owner's Manual (pdf)

Read more less

Explorer CompassFeatures: 2 3/4″(70 mm) Direct Reading Dial Easily Installed, Fits 3″ Instrument Hole. Bezels Styled to Match Popular Gauge Packages 12v Night Illumination Viewing is adjustable to 30 degrees Choice of Traditional Black or Designer White Colors Scientifically Matched Sapphire Jewel & Hardened Steel Pivot Dial Movement Built-in Compensators to Easily Adjust for Deviation Hi-Temperature Construction 100% Repairable Exclusive 5-Year Warranty Approx. Shipping Weight: 1lb (454g)Notes:All compasses come standard with 12v lighting. 24v lighting option is available. Some custom built OEM models may have different lighting. Specifications: Read: Front Mounting Style: Dash Backlight: Yes Lubber Lines: Yes Box Dimensions: 5"H x 6"W x 6"L WT: 0.8 lbs UPC: 010342160614 Quick Guide (pdf)Owner's Manual (pdf)

Read more less

Ritchie NC-20 Navigator Bulkhead Mount Compass Cover - WhiteBack cover for Navigator Bulkhead mount.For: BN-202Approx. Shipping Weight: 1lb (454g)

Read more less

SCU-38 Passive GPS AntennaThe Standard Horizon SCU-38 external receiver allows your compatible Standard Horizon radios internal GPS receiver to operate even when mounted in an area where the internal GPS cannot receive a signal. Simply connect the SCU-38 and mount the antenna where it has a clear view of the sky. Cable measures 5M long.The SCU-38 is compatible with the following Standard Horizon radios: GX1400G, GX1800G, GX1850G, and GX2400 *Please note that the SCU-38 is a passive antenna and will only work with units already equipped with a built-in GPS receiver.

Read more less

Garmin GT30-TH - Stainless Steel Thru-hull DownVü/SideVü 500W (CHIRP 455/800 kHz) Scanning Transducer with Temp, for Hull Deadrises Less Than 5° (12-pin)Get ultra-clear sonar pictures of objects, structure and fish that pass below and to the side of your boat with this 12-pin thru-hull transducer with stainless steel stem.This transducer with built-in fast response temperature sensor has a power rating of 500 W per element (1,500 W total); a depth of 750 ft (DownVü) and 500 ft left and right (SideVü) an operating frequency of CHIRP 455/800 kHz; for hull deadrises less than 5 degrees. Pair it with your GCV™ 10 scanning sonar module.Includes transducer with stainless steel stem, fairing block, isolation plate and bushings, extension cable, mounting hardware and installation instructions. Follow the instructions carefully to avoid damaging your boat.Compatible Devices: GCV™ 10 Scanning Sonar ModuleWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Cable Length (Feet): 5' + 30' y-extension Temperature: Yes Speed Included: No Mounting Style: Thru-Hull Imagining: Down/Side Chirp: Non Traditional Pins: 12 Box Dimensions: 5"H x 12"W x 14"L WT: 6.2 lbs UPC: 753759152802 Owner's Manual (pdf)

Read more less

GT15M-IH Plastic, In-Hull, Mid-Band CHIRP Transducer - 85-165kHz, 600W, 8-PinGT15M-IH transducer is ideal for boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It can be used with a hull deadrise angle between 0 and 25 degrees and is excellent for boats traveling at high speeds that want to maintain accurate depth readings.The 8-pin transducer with 4 plastic tanks features mid-band CHIRP traditional sonar (85-165 kHz) and has a power rating of 600 W. It can be used in conjunction with a GT30-TM transducer and an adapter cable so you can maintain depth at high speeds and scanning capabilities at trolling speeds.For installation, follow the included instructions carefully to avoid damaging your boat.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Temperature: No Speed Included: No Pins: 8 Mounting Style: In-Hull Cable Length (Feet): 20' Chirp: Medium Imagining: Standard Box Dimensions: 7"H x 7"W x 7"L WT: 1.8 lbs UPC: 753759148577

Read more less

Split Connector Threaded for RJ45 Network Cables - 18mmRoute cables in your vessel without drilling holes with Garmin's split connector threaded, RJ 45 cable.Compatible Devices: GDL 30/30A GMR™ 12xx Series GMR™ 18 Series GMR™ 20/21/24/40 Series GMR™ 4xx/6xx Series GMS™ 10 Network Port Expander GPSMAP® Series GSD™ 22/24/25/26 Pedestal for GMR™ 404xHD/406xHD WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Read more less

NMEA2000 Micro Cable 6M Double Ended - Male to Female - StraightCable NMEA2000 Micro 6M Double-EndedThis product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Read more less

Trolling Motor Barrel Mount f/Livescope Plus LVS34 Mount a compatible LiveScope™ transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and fits all barrel diameters, including those on popular Minn Kota® and MotorGuide® trolling motors.

Read more less

SingleViu 52mm (2-1/16") Voltmeter for 24V Systems - 32VSingleViu instruments represent the latest technology in instruments, and offer a top of the line solution by being able to work directly with traditional analog senders or work directly off a J1939 CAN network. Each SingleViu gauge has it's own microprocessor, which allows it to have a dual-input capability that can be switched from it's default analog input to J1939 CAN via the SingleViu Configuration software . Each speedometer or tachometer can also the display the J1939 system fault codes. These features, along with waterproof and fog proof construction, RGB LED illumination and advanced stepper motors make SingleViu the ideal solution when traditional gauges are needed or desired.Features: RGB LED Illumination (default illumination set to White)  Water Resistant Front & Rear  Includes Wire Harness Molex MX 150 8 Pin Connector Voltage 12-24V Spin-Lok™ Mounting Hardware Analog Input ∗Sold as an Individual WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Box Set: No Voltage - Input Range (Volts): 12-24V Series: SingleViu Gauge Type: Voltmeter/Ammeter Gauge Size: 52mm Box Dimensions: 4"H x 4"W x 6"L WT: 0.45 lbs UPC: 4103590683601 Owner's Manual (pdf)

Read more less