Marine Plumbing & Ventilation - Washdown / Pressure Pumps
Shurflo by Pentair AQUA KING II Junior Fresh Water Pump - 12 VDC, 2.0 GPM [4128-110-E04]
AQUA KING™ II Junior Fresh Water Pump - 12 VDC, 2.0 GPMSHURFLO's 4128 fresh water pump design was created with a unique over-molded single-piece diaphragm, assuring long life and top performance in all plumbing systems. Designed as the next legendary pump, the 4128 pump is constructed for smooth flow. The 4128 fresh water automatic demand pump is quiet, thermally protected and can run dry without damage.Features: 2901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor 4 Independent Chambers Built-In Check Valve Co-Molded Diaphragm Adjustable Switch Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE Specifications: Volts: 12v Max PSI: 30 Gallons Per Minute: 2 GPM Box Dimensions: 6"H x 6"W x 11"L WT: 4.9 lbs UPC: 752324012374
$173.50$112.50
Rule 3700 GPH General Purpose End Suction Centrifugal Pump - 24V [18A]
3700 GPH General Purpose End Suction Centrifugal Pump - 24VThe Rule General Pupose Pump is designed 1-1/2" (38mm) inlet and 1-1/2" (38mm) discharge outlet. The Rule General Purpose Pump must be mounted below the waterline. It does not deliver high pressure, nor is it self priming. It delivers lots of water but at low pressure. 24 volts DC. Features: 3700-GPH 24-Volt White/Red 3-Year Warranty WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
$381.99$259.50
Jabsco Par-Max HD6 Heavy Duty Water Pressure Pump - 12V - 6 GPM - 60 PSI [P601J-218S-3A]
Par-Max HD6 Heavy Duty Water Pressure Pump - 12V - 6 GPM - 60 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV Pumphead upper housing material: Glass fiber reinforced polypropylene Diaphragm: Co-molded TPV Check valves: EPDM Max inlet pressure: 30 PSI (2.1 Bar) Fluid temperature range: 32°F – 140°F (0°C – 60°C) Dry self-priming capability: 7ft min (2.13m/min) Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 6 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 9 lbs UPC: 671880841986 Brochure (pdf)
$329.99$225.50
Shurflo by Pentair PRO BLASTER II Washdown Pump Deluxe - 12 VDC, 4.0 GPM [4248-153-E09]
PRO BLASTER™ II Washdown Pump Deluxe - 12 VDC, 4.0 GPMSHURFLO's PRO BLASTER II washdown pump delivers superior performance that customers have come to expect and rely upon. Whether it's blasting away the grimiest decks clean, fish box scaling and anchor chain cleaning, SHURFLO's PRO BLASTER II washdown pump delivers high performance that provides a powerful consistent spray pattern. Built to withstand the marine environment with electro-coated motor, O-ring seals, fully sealed wire entries and can run dry without damage. Inlet strainer, 1/2" hose barb fittings and nozzle included. Ignition protected. Thermally protected.Features: 4901 Replacement Sealed Switch Sealed Motor Corrosion Resistant Electro Coated Motor Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 6"W x 12"L WT: 8.65 lbs UPC: 752324011964
$328.35$213.50
Whitecap 25 Blue Coiled Hose w/Adjustable Nozzle [P-0441B]
25' Blue Coiled Hose with Adjustable NozzleFeatures: 25' Blue Coiled Hose with Nozzle Male fitting: 3/4" Female Fitting: 3/4" Material: Polyrethane Hose Specifications: Type: Tools & Accessories Box Dimensions: 4"H x 12"W x 14"L WT: 1.9 lbs UPC: 725060044138
$49.99$33.50
Whitecap 50 White Coiled Hose w/Adjustable Nozzle [P-0442]
50' White Coiled Hose with Adjustable NozzleFeatures: 50' White Coiled Hose with Nozzle Male fitting: 3/4" Female Fitting: 3/4" Material: Polyrethane Hose Specifications: Type: Tools & Accessories Box Dimensions: 5"H x 12"W x 18"L WT: 2.8 lbs UPC: 725060044213
$64.99$42.50
Albin Group General Purpose Pump FIP F2 - 12V [04-01-001]
General Purpose Pump FIP F2 - 12VDC 12V F2 size FIP pump with capacity 30 L/min (8 GMP). Used for pumping water, oils and chemicals.Features: Pump body in thermo polymer, stainless steel shaft and high quality impeller Self priming up to 3m vertical lift Reversible flow direction by changing polarity Interchangeable with Johnson Pump 10-24886-01 Specifications: Weight: 0.6 kg/1 lb Dimensions: 160/6.3L x 90/3.5H x 120/4.7W mm/in Port Connection: 19mm (1/2″) Fuse: 8A *CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance Specifications: Gallons Per Minute: 8 GPM Volts: 12v Box Dimensions: 4"H x 5"W x 8"L WT: 4.7 lbs UPC: 7340176600899
$147.17$88.50
Jabsco Par-Max 3 Water Pressure Pump - 12V - 3 GPM - 40 PSI [31395-4012-3A]
Par-Max 3 Water Pressure Pump - 12V - 3 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV Pumphead upper housing material: Glass fiber reinforced polypropylene Diaphragm: Co-molded TPV Check valves: EPDM Max inlet pressure: 30 PSI (2.1 Bar) Fluid temperature range: 32°F – 140°F (0°C – 60°C) Dry self-priming capability: 7ft min (2.13m/min) Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 40 Gallons Per Minute: 3 GPM Box Dimensions: 6"H x 6"W x 16"L WT: 4.9 lbs UPC: 671880841801 Brochure (pdf)
$168.99$116.50
Flojet Water Booster System - 40PSI - 4.5GPM - 115V [02840000A]
Water Booster System - 40PSI - 4.5GPM - 115VThe Flojet 2840 Series Booster Systems are designed to provide constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 GPM at 10 psi (0.7 bar). The pump is fully automatic, with a built-in inlet strainer, pressure switch, and check valve, and supplies smooth flow from trickle to full flow. Typical uses include applications where available water pressure is very low and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in.Features: Integrated pump and tank system It can be mounted vertically or horizontally Flow rates up to 4.5 US Gallons/min. Kit Consists of:115V Quad MPU, 4.5 GPM, SW 40, 0.77 gal capacity accumulator tank, plastic mounting board, and pump inlet strainerWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4.5 GPM Max PSI: 40 Volts: 115v Box Dimensions: 9"H x 14"W x 17"L WT: 12.3 lbs UPC: 705474280001 Owner's Manual (pdf)
$849.99$571.50
Jabsco Single Stack Water System - 4.8 GPM - 40PSI - 12V [52520-1000]
Single Stack Water System - 4.8 GPM - 40PSI - 12VThe Single Stack Water System is a fully assembled water pressure set which makes installation of water pressure systems simple. The system consists of a PAR-Max 4.0 Pump, strainer and pre-pressurized accumulator tank.Serves four or more outlets.Features: Self-priming up to 10' (3M) Run-dry ability Smooth, even flow Thermal overload protection Complies with ISO 8846 MARINE (Ignition Protection) Three-year warranty Specifications: Flow: 4.8 GPM (18LPM) Shut-Off Pressure: 40PSI (2.8bar) Fitting: Connections for 3/4" (19mm) hose tail Size: 12.2" Long x 9.4" Wide x 9.8" High Weight: 12lbs (5.4kg) Specifications: Gallons Per Minute: 4.8 GPM Max PSI: 40 Volts: 12v Box Dimensions: 8"H x 11"W x 15"L WT: 12 lbs UPC: 671880615914
$829.99$559.50
Flojet Water Booster System - 40 PSI - 4.5GPM - 12V [02840100A]
Water Booster System - 40 PSI - 4.5GPM - 12VThe Flojet 2840 Series Booster Systems are designed to provide constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 GPM at 10 psi (0.7 bar). The pump is fully automatic, with a built-in inlet strainer, pressure switch, and check valve, and supplies smooth flow from trickle to full flow. Typical uses include applications where available water pressure is very low and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in.Features: Integrated pump and tank system It can be mounted vertically or horizontally Flow rates up to 4.5 US Gallons/min. Kit Consists of:12V Quad MPU, 4.5 GPM, SW 40, 0.77 gal capacity accumulator tank, plastic mounting board, and pump inlet strainerWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 4.5 GPM Max PSI: 40 Volts: 12v Box Dimensions: 9"H x 14"W x 17"L WT: 11.55 lbs UPC: 705474280018 Owner's Manual (pdf)
$739.99$504.50
Flojet RV Water Pump w/Strainer - 24V - 3GPM - 50PSI [R3526344D]
RV Water Pump with Strainer - 24V - 3GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 3 GPM (11 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
$199.99$138.50