Marine Plumbing & Ventilation - Washdown / Pressure Pumps

Heavy Duty RV Water Pump with Strainer - 24V - 4GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 4 GPM (15 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Par-Max HD6 Heavy Duty Water Pressure Pump - 12V - 6 GPM - 40 PSIHD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Available in configurations up to 6 GPM (23 LPM) and 60 PSI (4.1 BAR), these pumps deliver exceptional performance. Standard models provide good performance in an economical footprint. These configurations are available in 1-3 GPM, perfect for vessels with 1-3 outlets. A plastic housing protects the motors on these units from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for longlife, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Equipped with integrated bypass module to reduce cycling and provide smoother flow Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.13m/min)  Certifications: CE, ISO8846, RCM Ingress Protection: IPX6 WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 40 Gallons Per Minute: 6 GPM Box Dimensions: 6"H x 6"W x 15"L WT: 9 lbs UPC: 671880841979 Brochure (pdf)

Read more less

SHURFLO PRO WASHDOWN KIT™ II Ultimate - 12 VDC - 5.0 GPM - Includes Pump, Fittings, Nozzle, Strainer, 25' HoseSHURFLO's PRO WASHDOWN KIT II includes everything you need for those tough applications in fish box, scaling, anchor chain cleaning and blasting down the grimiest decks all in one kit! The kit includes a washdown pump (Ultimate 5.0), fittings, nozzle, raw water strainer and a 25' coiled hose.Features: Replaces 5901 Sealed Switch Sealed Motor Corrosion Resistant Electro Independent Chambers Built-In Check Valve Co-Molded Diaphragm Self-Priming up to 6 Feet Dry Run Capability Thermally Protected Ignition Protected, CE Fittings, Nozzle, Raw Water Strainer and a 25' Blue Coiled Hose Included Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 5 GPM Box Dimensions: 7"H x 12"W x 17"L WT: 11.8 lbs UPC: 752324012008

Read more less

Commercial Duty Water PuppyFlow rate: 34 litres/min (9 USgallons/min)Self-priming from dry up to 1.2m (4ft)Features: Small bilge debris present no problem to these bronze bodied, flexible impeller pumps. Simple design means fewer wearing parts. ISO 8846 MARINE (Ignition protection). ISO 8849 MARINE (Bilge pump standard). MotorPermanent magnet type, fully enclosed, stainless steel shaft, ball type shaft bearing, has adequate torque to reverse the pump Port Type1/2" Internal Pipe Threads 1" External Hose Barb Adapter for 3/4 " External Garden Hose Thread included WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 9 GPM Max PSI: 2.1-8.7 Volts: 24v Box Dimensions: 5"H x 6"W x 10"L WT: 6.9 lbs UPC: 671880532136 Owner's Manual (pdf)

Read more less

Mini Accumulator TankPart #: 30573-0003This accumulator tank is intended for installation in any pumped water system controlled by a pressure switch, and may also be used with air-driven pumps. The tank can serve as a storage vessel as well as a pulsation dampener for pressurized fluid. The accumulator tank smoothes water flow and reduces on/off switch cycling of the pump by lessening the variation in pressure and flow between the pump and the system discharge points.The even flow of water gives better control of hot water temperature with systems using instant water heaters.Features: Internal bladder Smoother flow Quieter water system Longer pump life Easily fitted to new or existing systems Compact size Quick-connect/disconnect port flttings Mounting point for optional pressure switch Food grade materials, NSF Standard 18 listed Volume: 21.5 oz Dimensions: 8.4 x 4.7 inches Max Pressure: 125 psi Weight: 0.96 lb Pre charged pressure: 10 psiWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Type: Accumulator/Pressure Tanks Box Dimensions: 5"H x 8"W x 12"L WT: 1.35 lbs UPC: 671880582834 Brochure (pdf)

Read more less

HotShot HD5 Heavy Duty Washdown Pump Kit with 25' HoseCoil - 12V - 5GPM - 70PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (heavy-duty) models include a wider diameter motor with a powder-coated shell, cast aluminum endbells, and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy-duty, motors and cast aluminum lower housings which allow for long life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions are available which include a 25' (7.6m) HoseCoil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hose barb and GHT fittings 90° 20 mesh Quick Connect strainer Trigger nozzle & Quick Connect hose adapters

Read more less

FW1214 Watermaster Automatic Pressure Pump - 12L - 30PSI - 12VCompared to Whale's FW0814, the FW1214 is more powerful at 30PSI and has a larger pumping capacity.Features: 12L per minute flow rate 30PSI 12V Internal pressure switch controlled (no external switching required) Fully sealed protective motor housing Completely integrated electronics Runs dry without damage (within reason) Includes a strainer to protect the pump from debris Self priming upto 3M (10') Easy installation - suitable for 15mm quick connect plumbing or 1/2" hosetails Suitable for use with salt or fresh water Quit operation WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. Specifications: Gallons Per Minute: 3 GPM Max PSI: 45 Volts: 12v Box Dimensions: 6"H x 8"W x 10"L WT: 4.2 lbs UPC: 766478946928

Read more less

Marine Air Conditioning Self-Priming Circulation Pump - 115VAC, 4.5GPM, 50PSI Bypass, Run-Dry Capable EDM ValvesShurflo will keep your air conditioning running. Air locking often occurs when you lower your boat into the water. Pentair Shurflo Self-priming Circulation Pumps help prevent air locking and keep your air conditioning system up and running. Compatible with all types of boats that are trailerable or not constantly in the water.Specifications: 4.5 GPM 115V Self-priming 50 psi bypass EPDM valves Benefits: Designed with automatic demand Operates quietly Includes thermal protection Can run dry without damage Mounts in any position Recommended Accessories for 5/8" Hose: One inlet strainer 255-215 Two 5/8" hose barb swivel elbows 244-3936 One 5/8" straight 244-2936 Specifications: Volts: 115v Gallons Per Minute: 4.5 GPM Sea Water Flow Rate: 4.5 GPM Voltage - Input Range (Volts): 115v Box Dimensions: 6"H x 6"W x 12"L WT: 7.6 lbs UPC: 752324329823 Brochure (pdf)

Read more less

High Flow Dual Pump System - 24 VDC - 10.0 GPMThe most advanced system available. This fully-automatic, quiet unit delivers water smoothly and consistently.Features: Replaces 5907 System Delivers up to 10 GPM at Open Flow Includes the AQUA KING II Supreme 5.0 Pump and PRO BLASTER II Ultimate 5.0 Pump 24 VDC 55 PSI Shut-off Pressure Built to Withstand the Harsh Marine Environment with Electro-Coated Motor, O-ring Seals and Fully-Sealed Wire Entries Specifications: Volts: 24v Max PSI: 55 Gallons Per Minute: 10 GPM Box Dimensions: 7"H x 7"W x 24"L WT: 16.1 lbs

Read more less

HotShot HD4 Heavy Duty Washdown Pump with 25' HoseCoil - 12V - 4 GPM - 60 PSIYears of clean decks and satisfaction in the form of robust and reliable high-flow and high-pressure diaphragm pumps. The Jabsco legacy of exceptional products continues with this updated and improved lineup of washdown pumps and kits. HD (Heavy Duty) models include a wider diameter motor with a powder coated shell, cast aluminum endbells and lower housing to improve pressure capability and life. Standard models provide exceptional performance in an economical footprint. A plastic housing protects the motors from corrosion. Features: Co-molded diaphragm technology for long life and durability HD models feature heavy duty, motors and cast aluminum lower housings which allow for long-life, even at high pressures Efficient and quiet operation Integrated, sealed pressure switch for on-demand operation Self-priming allows for installation versatility Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Full kit versions available which include 25' (7.6m) hose coil Specifications: Motor design: Brushed, permanent magnet TENV  Pumphead upper housing material: Glass fiber reinforced polypropylene  Diaphragm: Co-molded TPV  Check valves: EPDM  Max inlet pressure: 30 PSI (2.1 Bar)  Fluid temperature range: 32°F – 140°F (0°C – 60°C)  Dry self-priming capability: 7ft min (2.1m min)  Certifications: CE, ISO8846, RCM  Ingress protection: IPX6 Fittings & Accessories: Quick Connect straight hosebarb and GHT fittings. Size varies by model.  90° 20 mesh Quick Connect straine  Trigger nozzle & Quick Connect hose adapters  Kit version includes 25' HoseCoil WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov. Specifications: Volts: 12v Max PSI: 60 Gallons Per Minute: 4 GPM Box Dimensions: 6"H x 12"W x 17"L WT: 10.4 lbs UPC: 671880841924 Brochure (pdf)

Read more less

RV Water Pump with Strainer - 12V - 3GPM - 50PSIFlojet’s RV water pumps are designed to provide years of satisfactory service in applications both large and small. The lineup features a wide range of flows and a variety of pressure settings to suit each individual need and preference. Standard models have a motor enclosed in a protective plastic housing, whereas the HD models include a wider diameter motor with a powder-coated steel shell, cast aluminum end bells, and lower housing to improve pressure capability and life. All models include an integrated pressure switch, vibration dampening rubber mounting feet, and quick-connect ports. A built-in bypass valve helps to reduce unwanted pump cycling and noise. All models other than the 1 GPM come with an inlet strainer included as well.Features: CSA certified for potable water Integrated, sealed pressure switch for on-demand operation Internal bypass for quiet, smooth operation Integrated, sealed pressure switch for on-demand operation Co-molded diaphragm technology for long life and durability HD models have larger motors and cast aluminum lower housings which allow for long life, even at high pressures Can run dry without damage Quick connect ports for ease of installation, servicing, and maintenance Vibration dampening mounting feet Self-priming allows for installation versatility Built-in backflow prevention valve Thermal protection on motor prevents overheating Specifications: 12VDC & 24VDC 3 GPM (11 LPM) 50 PSI (3.4 BAR) Strainer & port fittings included WARNING: This product can expose you to chemicals including ANTIMONY OXIDE (ANTIMONY TRIOXIDE) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Read more less

Pressure Storage Tank - 0.5 Gallon DrawdownA pneumatic pressure charge, matched to the pump cut on pressure prevents water logging by separating the air charge from system water pressure with a rubber bladder. The result is smooth pressure delivery, even temperature mix in showers, and reduced pump cycling. Tanks may be mounted in any position, and anywhere in the cold water plumbing after the pump. PST tanks may be used for fresh or salt water. Mount hardware is included. PST-6 has a pump stand for mounting PJR, WSC-60 or WSC-80 pump. Specifications: Diameter: 8" Mounting: Stand 30/50 Drawdown: 0.5 gallon Thread NPT: 3/4"

Read more less